Characterization of conducting polymer coated fabrics at microwave frequencies

Purpose – The purpose of this paper is to investigate microwave reflection, transmission, and complex permittivity of p-toluene-2-sulfonic acid doped conducting polypyrrole coated nylon-lycra textiles in the 1-18?GHz frequency with a view to potential applications in the interaction of electromagnetic radiation with such coated fabrics.

Design/methodology/approach – The chemical polymerization of pyrrole is achieved by an oxidant, ferric chloride and doped with p-toluene sulfonic acid (pTSA) to enhance the conductivity and improve stability. Permittivity of the conducting textile substrates is performed using a free space transmission method accompanied by a mathematical diffraction reduction method.

Findings – The real part of permittivity increases with polymerization time and dopant concentration, reaching a plateau at certain dopant concentration and polymerization time. The imaginary part of permittivity shows a frequency dependent change throughout the test range. All the samples have higher values of absorption than reflection. The total electromagnetic shielding effectiveness exceeds 80 percent for the highly pTSA doped samples coated for 3?h.

Originality/value – A non-contact, non-destructive free space method thin flexible specimens to be tested with high accuracy across large frequency range. The non-destructive nature of the experiments enables investigation of the stability of the microwave transmission, reflection, absorption and complex permittivity values. Moreover, mathematical removal of the diffraction enables higher accuracy.

Short-term heating tests on doped polypyrrole-coated polyester fabrics

Polyethyleneterephtalate–polypyrrole (PET–PPy) textile complexes incorporating different anionic dopants have been heat treated at 60 °C, 80 °C, 105 °C, 125 °C and 150 °C to investigate effects of short-term heating on conductivity and stability. In most cases heat treatments below 80 °C did not significantly change the final resistance of the conducting textiles. Only the anionic dye-dopant Indigo Carmine acted in a heat-stabilizing manner during treatment at 150 °C, while all samples containing other anionic dopant underwent some degradation. A treatment temperature of 125 °C was the most effective for lowering the final resistance, with sulphonic group containing dopants being particularly effective in improving conductivity and stability. A 29% decrease in the final resistance of a PET–PPy/para-toluene-2-sulphonic acid (pTSA) sample was achievable after 900 s at 125 °C.

Conducting nylon, cotton and wool yarns by continuous vapor polymerization of pyrrole

Conductive textile yarns were prepared by a continuous vapor polymerization method; the application of polypyrrole by the continuous vapor polymerization method used is designed for the easy adaptation into industrial procedures. The resultant conductive yarns were examined by longitudinal and cross-sectional views, clearly showing the varying levels of penetration of the polymer into the yarn structure. It was found that for wool the optimum specific resistance was achieved by using the 400 TPM yarn with a FeCl3 solution concentration of 80 g/L FeCl3 to produce 1.69 Ω g/cm2. For cotton yarn, the optimum specific resistance of 1.53 Ω g/cm2 was obtained with 80 g/L of a FeCl3 solution.

One-step coating of fluoro-containing silica nanoparticles for universal generation of surface superhydrophobicity

Stable superhydrophobic surfaces with water contact angles over 170 degrees and sliding angles below 7 degrees were produced by simply coating a particulate silica sol solution of co-hydrolysed TEOS/fluorinated alkyl silane with NH₃^.H₂O on various substrates, including textile fabrics (e.g. polyester, wool and cotton), electrospun nanofibre mats, filter papers, glass slides, and silicon wafers.

A comparative study on accelerated weathering tests of wool fabrics

This work has used two lightboxes with Philips 500 W MBTF lamps for a comparative trial on the photoyellowing evaluation of untreated wool fabrics under dry and wet conditions. An investigation was made to account for different trends of photoyellowing of the same wool fabric when irradiated by the two lightboxes. The fabric specimens irradiated in one lamp experienced increasing yellowing with irradiation time while specimens from the same wool fabric but irradiated under the other lamp manifested no noticeable color change. These differences are attributed to the susceptibility of wool to small spectral differences between the two MBTF lamps. Furthermore, the color fading results obtained from the commonly used blue wool standard (BWS) references from L1 to L3 show that these reference materials could not effectively reveal changes caused by the spectral differences in two MBTF lamps. These results have important implications for conducting accelerated weathering tests on spectrum-sensitive textile materials, and considerable care should be taken when using BWSs to ensure reliable and consistent irradiation results.

Bleaching and dyeing of superfine wool powder/polypropylene blend film

Fibers based regenerated protein draw much attention for recycling discarded protein resources and can produce biodegradable and environmental friendly polymers. In this study, superfine wool powder is blended with polypropylene (PP) to produce wool powder/PP blend film through extrusion and hot-pressing. Hydrogen peroxide is used to bleach the black colored surface of the blend films. The effects of peroxide concentration, bleaching time and powder content on the final whiteness and mechanical properties of the blend films are investigated.

The bleached films are dyed with acid red dyes and the dyed color is evaluated using a Computer Color Matching System. Color characters of dyed films, such as L*, a*, b*, ΔE*ab, C*ab and K/S values are measured and analyzed. The study not only reuses discarded wool resources into organic powder, widens the application of superfine wool powder on polymers, but also improves the dyeing properties of PP through the addition of protein content.

Photochromic coloration of wool fabric

A method has been developed for producing photochromic wool fabric by applying a layer of hybrid silica containing a photochromic dye onto wool fibres. A number of different hybrid silicas were prepared by the sol-gel technique involving co-hydrolysis and co-condensation of alkyltrialkoxysilanes together with 3-glycidoxypropyltrimethoxysilane. With the dye Photorome II, it was possible to obtain a photo chromic coating which showed fast optical response. The coating had only a slight effect on the fabric handle. The durability of the coating appeared to be acceptable, at least for fashion wear.

Solospun : the long staple weavable singles yarn

Solospun^TM is a spinning technology which provides the means to produce a singles yarn that can be successfully woven as either warp or weft. The technology is a versatile and cost effective alternative to two-folding, Sirospun or sizing. It offers significant benefits in terms of efficiency and productivity. Solospun^TM is a simple, inexpensive, clip-on attachment for the spinning of long staple, weavable singles yarns. The technology is the result of a joint development between CSIRO Textile and Fibre Technology, The Woolmark Company and WRONZ and was commercially released in 1998. It is now successfully operating in worsted mills worldwide. The Solospun^TM hardware consists of a pair of rollers held in a bracket, which is clipped onto the front of the pendulum-drafting arm. Each roller is positioned immediately below, and parallel to, each top front draft roller where it interacts with the emerging drafted fibre strand before twist insertion. The roller-fibre interaction subtly changes the structure of the yarn, which dramatically increases its abrasion resistance. This allows Solospun yarns to be woven without twofolding or sizing, providing significant cost savings. Depending on fabric structure, weaving performance is equivalent to that of conventional two-fold yarns. Fabrics woven from Solospun^TM yarns are of good quality and appearance. Some aspects, including preferred hand and FAST results, are equal or superior to two-fold yarn fabrics. As with compact and condensed spinning, Solospun^TM offers significant reductions in yarn
hairiness. However, Solospun can be simply implemented on existing spinning frames and goes much further by making the singles yarns weavable.

Nanoparticle coatings for UV protective textiles

As the intensity of UV radiation increases every year, effective methods to block UV rays to protect human skin, plastics, timber and other polymer materials are urgently sought. Textiles serve as important materials for UV protection in many applications. The utilisation of nanoparticles to textile materials has been the object of several studies aimed at producing finished fabrics with different performances. This article reviews the recent advancement in the field of UV blocking textiles and fibers that are functionalised with nanostructured surface coatings. Different types of UV blocking agents are discussed and various examples of UV blocking textiles utilising ZnO and TiO₂ are presented. Future challenges such as wash-fastness and photocatalysis are also discussed.