ε-bounded state estimation for time-delay systems with bounded disturbances

A new problem on ε-bounded functional state estimation for time-delay systems with unknown bounded disturbances is studied in this paper. In the presence of unknown bounded disturbances, the common assumption regarding the observers matching condition is no longer required. In this regard, instead of achieving asymptotic convergence for the observer error, the error is now required to converge exponentially within a ball with a small radius ε > 0. This means that the estimate converges exponentially within an ε-bound of the true value. A general observer that utilises multiple-delayed output and input information is proposed. Sufficient conditions for the existence of the proposed observer are first given. We then employ an extended Lyapunov-Krasovskii functional which combines the delay-decomposition technique with a triple-integral term to study the ε-convergence problem of the observer error system. Moreover, the obtained results are shown to be more effective than the existing results for the cases with no disturbances and/or no time delay. Three numerical examples are given to illustrate the obtained results.

Swing-up and stability control of Wheeled Acrobot (WAcrobot)

In this paper the Wheeled Acrobot (WAcrobot), a novel mechanical system consisting of an underactuated double inverted pendulum robot (Acrobot) equipped with actuated wheels, is described. This underactuated and highly nonlinear system has potential applications in mobile manipulators and leg-wheeled robots. It is also a testbed for researchers studying advanced methodologies in nonlinear control. The control system for swing-up of the WAcrobot based on collocated or non-collocated feedback linearisation to linearise the active or passive Degree Of Freedom (DOF) followed by Linear Quadratic Regulator (LQR) to stabilise the robot is discussed. The effectiveness of the proposed scheme is validated with numerical simulation. The numerical results are visualised by graphical simulation to demonstrate the correlation between the numerical results and the WAcrobot physical response.

A sliding-mode-control-based adaptive cruise controller

This paper presents an alternative solution to the conventional cruise controller of a hybrid electric vehicle based on the sliding mode control approach. The mathematical model of a hybrid electric vehicle cruise control system is developed. Then, the sliding mode control approach is applied as the controller. The sliding mode control stability is investigated and demonstrated. Thereafter, the system is simulated and the results are presented. © 2014 IEEE.

Global finite-time stabilisation for a class of stochastic nonlinear systems by output feedback

In this paper, the problem of global finite-time stabilisation by output feedback is considered for a class of stochastic nonlinear systems. First, based on homogeneous systems theory and the adding a power integrator technique, a homogeneous reduced order observer and control law are constructed in a recursive manner for the nominal system. Then, the homogeneous domination approach is used to deal with the nonlinearities in drift and diffusion terms; it is shown that the proposed output-feedback control law can guarantee that the closed-loop system is global finite-time stable in probability. Finally, simulation examples are carried out to demonstrate the effectiveness of the proposed control scheme.

Cyber security and protection of ICS systems: An australian example

Many aspects of our modern society now have either a direct or implicit dependence upon information technology. As such, a compromise of the availability or integrity in relation to these systems (which may encompass such diverse domains as banking, government, health care, and law enforcement) could have dramatic consequences from a societal perspective. These key systems are often referred to as critical infrastructure. Critical infrastructure can consist of corporate information systems or systems that control key industrial processes; these specific systems are referred to as ICS (Industry Control Systems) systems. ICS systems have devolved since the 1960s from standalone systems to networked architectures that communicate across large distances, utilise wireless network and can be controlled via the Internet. ICS systems form part of many countries’ key critical infrastructure, including Australia. They are used to remotely monitor and control the delivery of essential services and products, such as electricity, gas, water, waste treatment and transport systems. The need for security measures within these systems was not anticipated in the early development stages as they were designed to be closed systems and not open systems to be accessible via the Internet. We are also seeing these ICS and their supporting systems being integrated into organisational corporate systems.

Incorporating human perception with the motion washout filter using fuzzy logic control

Abstract—Nowadays, classical washout filters are extensively used in commercial motion simulators. Even though there are several advantages for classical washout filters, such as short processing time, simplicity and ease of adjustment, they have several shortcomings. The main disadvantage is the fixed scheme and parameters of the classical washout filter cause inflexibility of the structure and thus the resulting simulator fails to suit all circumstances. Moreover, it is a conservative approach and the platform cannot be fully exploited. The aim of this research is to present a fuzzy logic approach and take the human perception error into account in the classical motion cueing algorithm, in order to improve both the physical limits of restitution and realistic human sensations. The fuzzy compensator signal is applied to adjust the filtered signals on the longitudinal and rotational channels online, as well as the tilt coordination to minimize the vestibular sensation error below the human perception threshold. The results indicate that the proposed fuzzy logic controllers significantly minimize the drawbacks of having fixed parameters and conservativeness in the classical washout filter. In addition, the performance of motion cueing algorithm and human perception for most occasions is improved.

Minimal unknown-input functional observers for multi-input multi-output LTI systems

Designing minimum possible order (minimal) disturbance-decoupled proper functional observers for multi-input multi-output (MIMO) linear time-invariant (LTI) systems is studied. It is not necessary that a minimum-order unknown-input functional observer (UIFO) exists in our proposed design procedure. If the minimum-order observer cannot be attained, the observer's order is increased sequentially through a recursive algorithm, so that the minimal order UIFO can be obtained. To the best of our knowledge, this is the first time that this specific problem is addressed. It is assumed that the system is unknown-input functional detectable, which is the least requirement for the existence of a stable UIFO. This condition also is a certificate for the convergence of our observer's order-increase algorithm. Two methodologies are demonstrated to solve the observer design equations. The second presented scheme, is a new design method that based on our observations has a better numerical performance than the first conventional one. Numerical examples and simulation results in the MATLAB/Simulink environment describe the overall observer design procedure, and highlight the efficacy of our new methodology to solve the observer equations in comparison to the conventional one.

Functional observer design with application to pre-compensated multi-variable systems

Partial state estimation of dynamical systems provides significant advantages in practical applications. Likewise, pre-compensator design for multi variable systems invokes considerable increase in the order of the original system. Hence, applying functional observer to pre-compensated systems can result in lower computational costs and more practicability in some applications such as fault diagnosis and output feedback control of these systems. In this note, functional observer design is investigated for pre-compensated systems. A lower order pre-compensator is designed based on a H2 norm optimization that is designed as the solution of a set of linear matrix inequalities (LMIs). Next, a minimum order functional observer is designed for the pre-compensated system. An LTI model of an irreversible chemical reactor is used to demonstrate our design algorithm, and to highlight the benefits of the proposed schemes.

Minimal multi-functional observers for linear systems using a direct approach

The direct approach in designing functional observers was first presented in [1] for estimating a single function of the states of a Linear Time-Invariant (LTI) system. One of the benefits of the direct scheme is that it does not require solving the interconnected Sylvester equations that appear in the other observer design approaches. In the present paper, the direct approach is extended to reconstruct multiple functions of the states in such a way that the minimum possible order of the observer is achieved. The observer is designed so that an asymptotic functional observer can be obtained with arbitrary convergence rate. In the proposed methodology, it is not necessary that a reduced order observer exists for the desired functions to be estimated. To release this limitation, an algorithm is employed to find some auxiliary functions in the minimum required number to be appended to the desired functions. This method assumes that the system is functional observable. This assumption however is less restrictive than the observability and detectability conditions of the system. A numerical example and simulation results explain the efficacy and the benefits of the proposed algorithm.

Refined Jensen-based inequality approach to stability analysis of time-delay systems

© 2015 The Institution of Engineering and Technology. In this study, the authors derive some new refined Jensen-based inequalities, which encompass both the Jensen inequality and its most recent improvement based on the Wirtinger integral inequality. The potential capability of this approach is demonstrated through applications to stability analysis of time-delay systems. More precisely, by using the newly derived inequalities, they establish new stability criteria for two classes of time-delay systems, namely discrete and distributed constant delays systems and interval time-varying delay systems. The resulting stability conditions are derived in terms of linear matrix inequalities, which can be efficiently solved by various convex optimisation algorithms. Numerical examples are given to show the effectiveness and least conservativeness of the results obtained in this study.

Partial state estimation of LTI systems with multiple constant time-delays

Functional observer design for Multi-Input Multi-Output (MIMO) Linear Time-Invariant (LTI) systems with multiple mixed time delays in the states of the system is addressed. Two structures for the design of a minimum-order observer are considered: 1 - delay-dependent, and 2 - internal-delay independent. The parameters of the delay-dependent observer are designed using the Lyapunov Krasovskii approach. The delay-dependent exponential stability of the observer for a specified convergence rate and delay values is guaranteed upon the feasibility of a set of Linear Matrix Inequalities (LMIs) together with a rank condition. Using the descriptor transformation, a modified Jensen's inequality, and improved Park's inequality, the results can be less conservative than the available functional observer design methods that address LTI systems with single state delay. Furthermore, the necessary and sufficient conditions of the asymptotic stability of the internal-delay independent observer are obtained, which are shown to be independent of delay. Two illustrative numerical examples and simulation studies confirm the validity and highlight the performance of the proposed theoretical achievements.

Functional observer-based fault detection of time-delay systems via an LMI approach

This paper presents a novel residual generator that uses minimum-order functional observers to trigger actuator and component faults in time-delay systems. We first present a fault detection scheme and derive existence conditions of the residual generator and functional observer. The observer and residual parameters are then systematically determined via solving some coupled generalized Sylvester matrix equations. To deal with the time-delay issue, a stabilizability condition expressed in terms of linear matrix inequality (LMI) is derived to ensure the time-delay observer error system converges to zero with a prescribed convergence rate. Our design approach has the advantage that the designed fault detection scheme has lower order than existing results in the literature. Two numerical examples are given to illustrate the effectiveness of our results.