Integrated construction supply chain design and delivery solutions

This study describes the development of a decision framework to support multi-disciplinary information and knowledge management model which focuses on integrated design and delivery solutions for all construction supply chain actors. The framework was developed within the context of two national information technology research projects in Australia. The first study used diffusion theory to explain the barriers and enablers to future adoption of advanced information technology solutions such as building information modelling (BIM). A grounded theory methodology was deployed and a pathways model for innovative information technology diffusion accommodating diverse patterns of adoption and different levels of expertize was developed. The second study built on the findings of the first study but specifically focussed on innovators, early and late adopters of BIM and the development of a decision framework towards advanced collaborative platform solutions. This study summarizes the empirical results of the previous studies. The core of the decision framework is the creation, use and ownership of building information sub-models and integrated models. The decision framework relies on holistic collaborative design management. Design expertise is diffused and can be found in various locations along the construction supply chain within project teams. A wide definition of design is considered from conceptual to developed to detailed design. The recent development to the decision model offers much potential as the early upstream decisions are often made in a creative, collaborative and uncertain environment. However, decision making needs to balance both a reductionist and exploratory creative empowerment approach. Shared team expertise and competency and team mental models are explored as a fundamental requirement to collaborative BIM. New skills in interdisciplinarity are discussed as an implication of future construction industry collaborative platforms.

'Everybody has settled in so well': How migrants make connections and build social capital in Geelong

Australian and Victorian Government policies encourage settlement in regional areas for international migrants, refugees and internal migrants. Migrants to regional areas are diverse in terms of their area or country of origin, skills and occupation, family status and other demographic characteristics. The regional cities to which they migrate are also varied in terms of their community resources, social and cultural capital. The objective shared by all of these cities is for migrants to engage successfully with their new communities. Just how this occurs is the subject of debate and a lack of clarity. This therefore calls for a sound, theoretically informed understanding of how employers and community groups (formal and informal) can effectively assist migrants to make social connections in regional cities, and practical strategies which respond to these insights. The well-established social determinants of health tell us that the more socially included, connected and stable workforce and their families are, the better will be their physical and mental health and wellbeing.

Design and analysis of an antenna for wireless energy harvesting in head-mountable DBS device

This paper presents design and simulation of a circular meander dipole antenna at the industrial, scientific, and medical band of 915 MHz for energy scavenging in a passive head-mountable deep brain stimulation device. The interaction of the proposed antenna with a rat body is modeled and discussed. In the antenna, the radiating layer is meandered, and a FR-4 substrate is used to limit the radius and height of the antenna to 14 mm and 1.60 mm, respectively. The resonance frequency of the designed antenna is 915 MHz and the bandwidth of 15 MHz at a return loss of -10 dB in free space. To model the interaction of the antenna with a rat body, two aspects including functional and biological are considered. The functional aspect includes input impedance, resonance frequency, gain pattern, radiation efficiency of the antenna, and the biological aspect involves electric field distribution, and SAR value. A complete rat model is used in the finite difference time domain based EM simulation software XFdtd. The simulated results demonstrate that the specific absorption rate distributions occur within the skull in the rat model, and their values are higher than the standard regulated values for the antenna receiving power of 1W.

Design and analysis of efficient rectifiers for wireless power harvesting in DBS devices

This paper presents an analysis of optimum rectifier circuits for wireless energy harvesting in deep brain stimulation (DBS) devices. Since DBS demands compact and low power consumption devices, small, high conversion efficient, and high output voltage rectifiers need to be developed. The investigation that is presented in this paper is analytical and simulated based. Analysis on a variety of circuit configurations brings more evidence to improve the performance of rectifiers. Analytical parameters influencing the output DC voltage and the efficiency of the rectifiers are described. The operating frequency of the 915 MHz industrial, scientific and medical (ISM) radio band is used in this study. The maximum conversion efficiency of the LC matched half wave rectifier, the Greinacher voltage doubler, the Delon doubler, and the 2-stage voltage multiplier is obtained as 56.34%, 74.45%, 71.48%, and 31.44%, respectively, at the 30 dBm input power level. The corresponding maximum output DC voltages are 6.27 V, 16.83 V, 13.36 V, and 9.20 V. Thus the Greinacher voltage doubler is deemed as the best configuration according to the conversion efficiency and the output voltage measurements.

Design and analysis of a low actuation voltage electrowetting-on-dielectric device

This paper presents an Electrowetting-on-Dielectric (EWOD) device with optimized insulating layers operated by low actuation voltage. The device consists of an electrode array on a silicon substrate, covered by a dielectric layer and a hydrophobic layer. To characterize the performance of the device, simulations are performed for the dielectric layer of Sio₂ and the hydrophobic layer of Sio₂, Su-8 and Parylene C at different voltages. The volume finite difference approach of the Coventorware software was used to carry out the simulations. Two different molar of di-ionized water droplet were considered in the simulations. It was observed that the device having the Sio₂ dielectric layer and the Parylene C hydrophobic layer moved the 1M KCL (potassium chloride) droplet at the actuation voltage of 25V.

A parallel-group, randomised controlled trial of a multimedia, self-directed, coping skills training intervention for patients with cancer and their partners: design and rationale

Introduction:

The design and implementation of a novel method for quantifying training loads in elite rowing: the T2minute method

Introduction: A systematic approach to managing the training of elite athletes is supported by accurate training load measurement. However, quantifying the training of elite Australian rowers is complex due to unique challenges: 1) the multi-centre, multi-state structure of the national program; 2) the variety of training undertaken, incorporating rowing-specific and non-specific modalities, with continuous and interval efforts that span the full intensity spectrum; and 3) the limitations of existing quantification methods for capturing total training loads undertaken from varied training. These challenges highlighted a need to create a consistent, location-independent framework for prescribing training in elite rowing, with a capacity to account for varied training. Methods: An in-house proprietary measure (the T2minute method) was developed at the National Rowing Centre of Excellence (NRCE), as a collaborative project between sport scientists and national squad coaches. The design phase was informed by assessments of the existing training measures, and built upon standardised intensity zones established at the Australian Institute of Sport. A common measurement unit was chosen: one T2minute equates to one minute of on-water single scull rowing at T2 intensity (∼60–72% VO2max). Each intensity zone was assigned a weighting factor according to the curvilinear relationship between power output, intensity, and blood lactate response. Each training mode was assigned a weighting factor based on whether coaches perceived it to be “harder” or “easier” than onwater rowing. With coaches’ feedback, the method was refined over a period of five months. The T2minute method was implemented as the core framework for prescribing training for elite Australian rowers throughout the 2009–2012 Olympic cycle. Results: The implementation of the T2minute method successfully established consistency with training prescription and monitoring practices within the NRCE high performance program. The national roll out this method has influenced rowing training methodology at elite and sub-elite levels in Australia. Since implementation, the method has undergone scientific validation. Further research is underway, utilising the method to explore complex relationships between rowers’ training and performance outcomes. Conclusion: The T2minute method is a novel approach that allows rowing coaches and sport scientists to utilise one consistent system to quantify load from varied training. Its implementation represents a considerable achievement in establishing a common framework for managing the training process within a complex organisational structure. This collaborative approach used to develop the T2minute method provides unique insight into the important considerations and practical challenges of applying training science to enhance elite sport performance.