Removal of natural organic matter though membrane filtration and subsequent effect on disinfectant decay

This study aims to evaluate the effectiveness of membrane filtration in removing natural organic matters (NOMs) from four different source waters and the subsequent effect that it has on total chlorine (TC) demand of these waters. Source water samples were filtered sequentially through membranes with molecular weight cut-off of 3,500, 1,000 and 200 Da as well as RO membrane. The source waters and sequentially filtered samples were dosed with chlorine and the residual chlorine data were used to estimate the TC demand of these waters. A robust chlorine decay model constructed in AQUASIM software was used to do so. More than 80% of the chlorine demand in untreated surface water sources was found to be contributed mainly by NOMs that were larger than 3,500 Da. However, for water treated by granular filtration, the chlorine demand was found to be contributed by NOMs which were down to 200 Da. Sequential filtration through all four membranes reduced chlorine demand by more than 94% in surface waters and 84% in waters treated by granular filtration. Significant reduction in the formation of trihalomethane can be achieved if water is treated by appropriate membranes after granular media filtration. © 2014 © 2014 Balaban Desalination Publications. All rights reserved.

Oil-spill cleanup: the influence of acetylated curaua fibers on the oil-removal capability of magnetic composites

A magnetic resin based on cardanol, furfural, and curaua fibers was prepared and characterized. The material could be used in oil-spill cleanup processes, because of its aromatic/aliphatic balance. The resin was prepared through bulk polycondensation of cardanol and furfural in the presence of curaua fibers and maghemite nanoparticles. Hydrophobicity of the curaua fibers was improved by acetylation, increasing the oil-absorbing capability of the composites. The obtained magnetic composites were studied by Fourier-transform infrared spectroscopy, X-ray diffraction, and thermogravimetric analysis. Degree of cure, magnetic force, and oil-removal capability tests were also performed. The results show that the composites possess an elevated cure degree in addition to a considerable magnetic force. The materials exhibit a good oil removal capability in the presence of a magnetic field, which is improved by the use of acetylated curaua. In the best case, the composite filled with maghemite and curaua can remove 12 parts of oil from water.

Template-free synthesis of functional 3D BN architecture for removal of dyes from water.

Three-dimensional (3D) architectures are of interest in applications in electronics, catalysis devices, sensors and adsorption materials. However, it is still a challenge to fabricate 3D BN architectures by a simple method. Here, we report the direct synthesis of 3D BN architectures by a simple thermal treatment process. A 3D BN architecture consists of an interconnected flexible network of nanosheets. The typical nitrogen adsorption/desorption results demonstrate that the specific surface area for the as-prepared samples is up to 1156 m(2) g(-1), and the total pore volume is about 1.17 cm(3) g(-1). The 3D BN architecture displays very high adsorption rates and large capacities for organic dyes in water without any other additives due to its low densities, high resistance to oxidation, good chemical inertness and high surface area. Importantly, 88% of the starting adsorption capacity is maintained after 15 cycles. These results indicate that the 3D BN architecture is potential environmental materials for water purification and treatment.

Adsorption kinetics and optimum conditions for Cr(VI) removal by activated carbon prepared from luffa sponge

Activated carbon (AC) prepared from luffa sponge was firstly used as an adsorbent to remove Cr(VI) from aqueous solution. The Cr(VI) adsorption behaviors of AC under different conditions, including initial Cr(VI) concentration, quantity of AC, solution pH, and temperature were investigated. The optimal conditions for adsorption of Cr(VI) by AC were pH = 1, initial Cr(VI) concentration = 80 mg/L, T = 303 K, and AC content = 1.6 g/L. The adsorption kinetics could be described by the pseudo-second-order model. Fourier transform infrared spectroscopy was used to investigate the sorption mechanism. Some functional groups such as C–O and O–H were formed on the carbon surface, which could then react with Cr(VI). The surface structure of AC before and after adsorption was analyzed by scanning electronic microscopy. Adsorbed ions choked some of the pores in AC after adsorption. The Brunauer–Emmett–Teller surface area and average pore size of the AC were 834.13 m2/g and 5.17 nm, respectively. The maximum adsorption of Cr(VI) by AC was 149.06 mg/g, which makes AC prepared from luffa sponge promising for removing Cr(VI) from wastewater.

Isotherm, kinetic, and thermodynamic equations for cefalexin removal from liquids using activated carbon synthesized from loofah sponge

Activated carbon (AC) developed from loofah sponge with phosphoric acid activation was applied to absorb cefalexin (CEX) in aqueous solution. AC was characterized by N2 adsorption–desorption isotherms and Fourier transform infrared spectroscopy (FTIR). Factors influencing the adsorption process were investigated. The equilibrium adsorption isotherms and kinetics of CEX were also studied. The results showed that AC prepared from loofah sponge had rough surface and abundant pores. The determination results of specific surface area (810.12 m²/g) and average pore size (5.28 nm) suggested the high adsorption capability. At low concentration, the AC could adsorb about 95% of CEX. The adsorption effect was independent of the temperature and pH. The maximum adsorption amount of CEX was about 55.11 mg/g at 308 K. The equilibrium data agreed well with Freundlich isotherm equation (R² = 0.9957) at 308 K, which indicated multilayer adsorption. FTIR analysis suggested the existence of phosphorus-containing functional groups, C–O bond, and C=C bond on the surface of AC of which the peak intensity of AC after adsorption was slightly lower after adsorption, indicating that the AC surface groups interacted with or were covered by the CEX species.

Unrelated helpers neither signal contributions nor suffer retribution in chestnut-crowed babblers

Alloparental care by distant/nonkin that accrue few kin-selected benefits requires direct fitness benefits to evolve. The pay-to-stay hypothesis, under which helpers contribute to alloparental care to avoid being expelled from the group by dominant individuals, offers one such explanation. Here, we investigated 2 key predictions derived from the pay-to-stay hypothesis using the chestnut-crowed babbler, Pomatostomus ruficeps, a cooperatively breeding bird where helping by distant/nonkin is common (18% of nonbreeding helpers). First, we found no indication that distant or nonkin male helpers advertised their contributions toward the primary male breeder. Helpers unrelated to both breeders were unresponsive to provisioning rates of the dominant male, whereas helpers that were related to either the breeding male or to both members of the pair were responsive. In addition, unrelated male helpers did not advertise their contributions to provisioning by disproportionately synchronizing their provisioning events with those of the primary male breeder or by provisioning nestlings immediately after him. Second, no helper, irrespective of its relatedness to the dominant breeders, received aggression when released back into the group following temporary removal for 1-2 days. We therefore find no compelling support for the hypothesis that pay-to-stay mechanisms account for the cooperative behavior of unrelated males in chestnut-crowned babblers.

Crystals in Antheraea assamensis silkworm cocoon: their removal, recovery and roles

Brick shaped mineral deposits or crystals are found in the shell of semi-domestic silk cocoon of Antheraea assamensis (A. assamensis). Effective removal and recovery of these crystals are important to understand their roles in the cocoon's protective function towards pupae. In this study, chemical and physical (ultrasonication) demineralisation methods were investigated for A. assamensis. It was found that the physical demineralisation method could effectively separate crystals without changing their shape and size and not effecting other components of the silk cocoon. The efficient recovery of the crystals, without any change in their chemical composition was confirmed based on FTIR, XRD and EDX techniques. Chemical demineralisation method was optimised and performed under milder conditions than reported in the past. It helped reeling of silk without much loss of strength or natural colour of silk fibre.

Rapid and effective cuticle removal from wool fibers using ionic liquid

Wool fibers are composed of cuticle and cortex cells, which are of obvious differences in many properties. The development of methods to isolate the two kinds of cells can provide platform to elucidate the roles they play in the characteristics of wool fibers. Here we demonstrate the cuticle can be completely and rapidly removed from the wool fibers by the use of ionic liquids, with inner cortex intact. Confocal microscope, SEM and FTIR have been applied to study the wool fibers after cuticle removal. In contrast to the traditional/long physical or chemical separation routes (>14 h), our method is very rapid (<1 h). This work demonstrates the ability of ionic liquid as a novel, rapid and efficient media for cuticle/ cortex isolation.

Capsular polypyrrole hollow nanofibers: an efficient recyclable adsorbent for hexavalent chromium removal

Capsular polypyrrole hollow nanofibers (PPy-HNFs) were fabricated via in situ polymerization of pyrrole on an organic-inorganic template, followed by acid etching. Their application in removing hexavalent chromium (Cr(vi)) from aqueous solution was then investigated. The morphologies of the capsular PPy-HNFs were studied by both scanning electron microscopy (SEM) and transmission electron microscopy (TEM), which showed that the PPy-HNFs had a capsular structure in the walls of hollow nanofibers. Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) data confirmed the adsorption of Cr on capsular PPy-HNFs. The adsorption capacity increased with reduced pH of the initial solution and the adsorption process can be described using the pseudo-second-order model. These capsular PPy-HNFs showed a high Cr(vi) adsorption capacity up to 839.3 mg g-1. This adsorption capacity was largely retained even after five adsorption/desorption cycles. Electrostatic attraction between Cr and PPy-HNFs was studied using a proposed adsorption mechanism. The capsular PPy-HNFs formed a flexible membrane, which allowed easy handling during application. This study has demonstrated the possibilities of using this capsular PPy-HNF membrane for heavy metal removal from aqueous solution.