Sodium ion dynamics in a sulfonate based ionomer system studied by 23Na solid-state nuclear magnetic resonance and impedance spectroscopy

A poly(2-acrylamido-2-methyl-1-propane-sulphonate) (PAMPS) ionomer containing both sodium and quaternary ammonium cations functionalised with an ether group, has been characterised in terms of its thermal properties, ionic conductivity and sodium ion dynamics. The ether oxygen was incorporated to reduce the Na+ association with the anionic sulfonate groups tethered to the polymer backbone, thereby promoting ion dissociation and ultimately enhancing the ionic conductivity. This functionalised ammonium cation led to a significant reduction in the ionomer Tg compared to an analogue system without an ether group, resulting in an increase in ionic conductivity of approximately four orders of magnitude. The sodium ion dynamics were probed by 23Na solid-state NMR, which allowed the signals from the dissociated (mobile) and bound Na+ cations to be distinguished. This demonstrates the utility of 23Na solid-state NMR as a probe of sodium dynamics in ionomer systems.

Gelled ionic liquid sodium ion conductors for sodium batteries

Owing to the unique properties of certain Ionic liquids (ILs) as safe and green solvents, as well as the potential of sodium as an alternative to lithium as charge carriers, we investigate gel sodium electrolytes as safe, low cost and high performance materials with sufficient mechanical properties for application in sodium battery technologies. We investigate the effect of formation of two types of gel electrolytes on the properties of IL electrolytes known to support Na/Na⁺ electrochemistry. The ionic conductivity is only slightly decreased by 0.0005 and 0.0002 S cm^-1 in the case of 0.3 and 0.5 M NaNTf2 systems respectively as the physical properties transition from liquid to gel. We observed facile plating and stripping of Na metal around 0 V vs. Na/Na⁺ through the cyclic voltammetry. A wide-temperature range of the gelled IL state, of more than 100 K around room temperature, is achieved in the case of 0.3 and 0.5 M NaNTf2. We conclude that the formation of a gel does not significantly affect the liquid-like ion dynamics in these materials, as further evidenced by DSC and FTIR analysis.

Upregulation of sodium iodide symporter (NIS) protein expression by an innate immunity component: promising potential for targeting radiosensitive retinoblastoma

Retinoblastoma (RB), a malignant tumour of the eye arising from developing retina, is the most frequent primary intraocular malignancy of childhood. Its primary management with chemotherapy involves combination regimen of etoposide, vincristine and carboplatin and intra vitreal chemotherapy using melphalan when vitreous seeds develop. Radiotherapy is another effective mode in treating RB. We recently explored the notion if radiotherapy in RB can be mediated via Sodium Iodide Symporter (NIS), an intrinsic membrane glycoprotein which is a key regulator of iodide access to thyroid gland. Its expression has been exploited successfully for diagnostic imaging and molecular radionuclide-based therapy of thyroid cancer. We determined that NIS is expressed endogenously in RB tumour tissues, and in retinoblastoma cell lines Y79 and Weri-Rb-1, and therefore made an attempt to enhance the endogenously low expression of NIS protein in both Y79 and Weri-Rb-1 cells. Here we report about the potential of bovine lactoferrin (bLf) which is a known chemo preventive and emerging safe anti-cancer bio drug, as well as a natural transcriptional activator of genes, to enhance the endogenous expression of NIS in Y79 and Weri-Rb-1 cells. Real time PCR revealed that both cell lines express mRNA of lactoferrin receptors while flow cytometry and confocal microscopy showed the cells efficiently internalize bLf which upregulates NIS expression. These findings highlight an important step that could be taken towards the development of less harmful approaches for the treatment of RB by employing natural supplement bLf (with its clinically proven safe profile), and warrants further studies in future, focussing on enhancing NIS expression in RB cells and NIS functional assays in these cells.

Ex situ electrochemical sodiation/desodiation observation of Co₃O₄ anchored carbon nanotubes: a high performance sodium-ion battery anode produced by pulsed plasma in a liquid

Liquid plasma, produced by nanosecond pulses, provides an efficient and simple way to fabricate a nanocomposite architecture of Co3O4/CNTs from carbon nanotubes (CNTs) and clusters of Co3O4 nanoparticles in deionized water. The crucial feature of the composite's structure is that Co3O4 nanoparticle clusters are uniformly dispersed and anchored to CNT networks in which Co3O4 guarantees high electrochemical reactivity towards sodium, and CNTs provide conductivity and stabilize the anode structure. We demonstrated that the Co3O4/CNT nanocomposite is capable of delivering a stable and high capacity of 403 mA h g(-1) at 50 mA g(-1) after 100 cycles where the sodium uptake/extract is confirmed in the way of reversible conversion reaction by adopting ex situ techniques. The rate capability of the composite is significantly improved and its reversible capacity is measured to be 212 mA h g(-1) at 1.6 A g(-1) and 190 mA h g(-1) at 3.2 A g(-1), respectively. Due to the simple synthesis technique with high electrochemical performance, Co3O4/CNT nanocomposites have great potential as anode materials for sodium-ion batteries.

Nanostructured composite anodes and cathodes for lithium-ion and sodium-ion batteries

The thesis was focused on developing alloy based anode materials for Li-ion and Na-ion batteries. It helps to reduce the size and increase the energy density of the batteries. Furthermore, a novel cathode material was developed for Na-ion batteries which showed good cycling performance over a period of 100 cycles.

Synthesis and performance of itaconic acid/acrylamide/sodium styrene sulfonate as a self-adapting retarder for oil well cement

This journal is © The Royal Society of Chemistry. A novel self-adapting retarder itaconic acid/acrylamide/sodium styrene sulfonate (IA/AM/SSS, hereinafter referred to as PIAS) was synthesized by free-radical, aqueous-solution polymerization and characterized by FTIR and TG. The optimum reaction conditions of polymerization were obtained from orthogonal experiments (L3³) and subsequent data analysis. According to the evaluation as a retarder, the PIAS made it possible to obtain both a long thickening time and a swift compressive strength development for cement slurry, and therefore the applicable range of bottom hole circulation temperatures to the cement slurry has been widened to 60-180°C. Moreover, the working mechanism of the self-adapting retarder PIAS was found to rely on the change of spatial structure of the molecules to retard the hydration of the cement. This paper also expounds that the delayed coagulation of the cement slurry is attributed to adsorption, chelation and "poisoning" effects of the PIAS molecules on the surface of hydrated particles or ions through XRD and SEM analyses.

Synergistic effects of sodium lauroyl sarcosinate and glutamic acid in inhibition assembly against copper corrosion in acidic solution

© 2015 Elsevier B.V. All rights reserved. A self-assembled multilayer (SAM) from sodium lauroyl sarcosinate (SLS) and glutamic acid (GLU) is formed on copper surface. Its inhibition ability against copper corrosion is examined by electrochemical analysis and weight loss test. In comparison to SAM formed by just SLS or GLU, a synergistic effect is observed when the coexistence of SLS and GLU in SAM. The SLS/GLU SAM has an acicular multilayer structure, and SAM prepared under the condition of 5 mM SLS and 1 mM GLU shows the best protection efficiency. PM6 calculation reveals that the synergistic effect stems from interactions between SLS, GLU and cupric ions.

Potential degrading effect of sodium hypochlorite on exhibits containing DNA

The use of a sodium hypochlorite solution as a cleaning reagent is common practice among many laboratories for contamination minimisation purposes. Whilst its effectiveness in the decontamination of tools and surfaces has been verified at specific concentrations, it has not yet been established whether any residual sodium hypochlorite potentially remaining on tools/surfaces following cleaning has a detrimental effect if direct contact is made with an exhibit containing DNA. To investigate the effect of residual hypochlorite, surfaces were treated with 10% hypochlorite (air-dried or wiped dry), 1% hypochlorite (air-dried or wiped dry), or 1% hypochlorite (wiped dry) followed by the application of water (wiped dry). Treated surfaces came into contact with surfaces carrying 200. ng of DNA within 100. μL, or 20. ng within 20. μL. To observe the potential degrading effects of sodium hypochlorite, the quantity and quality of DNA within DNA deposits following contact with treated and untreated surfaces were compared. Overall, no degrading effect on DNA quantity/quality was observed, with the exception of DNA deposits that came into contact with surfaces treated with 10% hypochlorite and air-dried. It is therefore recommended that surfaces cleaned with high concentrations of hypochlorite be wiped dry or rinsed with an appropriate agent (water) following application.

Dietary sources and sodium intake in a sample of Australian preschool children

OBJECTIVES: To assess dietary sodium intake and the food sources of sodium in a sample of Australian preschool children. DESIGN: Cross-sectional. SETTING: Mothers were followed up when children were approximately 3.5 years of age after participating in a cluster randomised controlled trial: the Melbourne Infant Feeding Activity and Nutrition Trial Program. PARTICIPANTS: 251 Australian children aged 3.5±0.19 (SD) years. PRIMARY AND SECONDARY OUTCOME MEASURES: The average daily sodium intake was determined using three unscheduled 24 h dietary recalls. The contributions of food groups, core, discretionary and processed foods to daily sodium intake were assessed. RESULTS: The average sodium intake was 1508±495 (SD) mg/day, (salt equivalent 3.9±1.3 (SD) g/day) and 87% of children exceeded the Australian Upper Level of Intake (UL) for sodium of 1000 mg/day (salt equivalent 2.6 g/day). Main food sources of sodium were cereal/cereal products (25%), milk products (19%), meat, poultry/game (17%) and cereal-based products (15%). Core foods contributed 65%, and discretionary foods 35% of total daily sodium intake, and within the total diet, minimally processed, processed, processed culinary ingredient and ultraprocessed foods contributed 16%, 35%, 1% and 48% of sodium, respectively. CONCLUSIONS: Within this sample, most children exceeded the recommended UL for sodium. Core and ultraprocessed foods were key sources of sodium which suggests that reductions in the sodium content of these foods are required to reduce sodium intake in young children. These data also provide further support for public health campaigns that seek to reduce consumption of energy-dense, nutrient-poor foods.

Increased ion conduction in dual cation [sodium][tetraalkylammonium] poly[4-styrenesulfonyl(trifluoromethylsulfonyl)imide-co-ethylacrylate] ionomers

© The Royal Society of Chemistry. Solid-state polymer electrolytes, as an alternative to traditional liquid electrolytes, have been intensively investigated for energy conversion and storage devices. The transport rate of single ions is the key to their high performance. For application in emerging sodium batteries, we have developed three dual-cation polymeric ionomers, which contain bulky tetraalkylammonium ions in addition to the sodium ion. The sizes and relative contents of the ammonium ions vary relative to the sodium ion contents. Comparative studies of ion dynamics, thermal properties, phase behaviours and ionic conductivities were carried out, taking advantage of various spectroscopic and thermal chemistry methods. The ion conductivities of the ionomers are greatly enhanced by the introduction of bulky counterions, as a result of the additional free volume and decreased sodium ion association. Raman spectroscopy and thermal analysis as well as the solid-state nuclear magnetic resonance studies are used to probe the conductivity behaviour.

24-h urinary sodium excretion is associated with obesity in a cross-sectional sample of Australian schoolchildren

Emerging evidence indicates that dietary Na may be linked to obesity; however it is unclear whether this relationship is independent of energy intake (EI). The aim of this study was to assess the association between Na intake and measures of adiposity, including BMI z score, weight category and waist:height ratio (WHtR), in a sample of Australian schoolchildren. This was a cross-sectional study of schoolchildren aged 4-12 years. Na intake was assessed via one 24-h urine collection. BMI was converted to age- and sex-specific z scores, and WHtR was used to define abdominal obesity. In children aged ≥8 years, EI was determined via one 24-h dietary recall. Of the 666 children with valid urine samples 55 % were male (average age 9·3 (sd 1·8) years). In adjusted models an additional 17 mmol/d of Na was associated with a 0·10 higher BMI z score (95 % CI 0·07, 0·13), a 23 % (OR 1·23; 95 % CI 1·16, 1·31) greater risk of being overweight/obese and a 15 % (OR 1·15; 95 % CI 1·09, 1·23) greater risk of being centrally obese. In the subsample of 8-12-year-old children (n 458), adjustment for EI did not markedly alter the associations between Na and adiposity outcomes. Using a robust measure of daily Na intake we found a positive association between Na intake and obesity risk in Australian schoolchildren, which could not be explained by total energy consumption. To determine whether this is a causal relationship, longitudinal studies, with high-quality measures of Na and EI, are required.

Novel Na+ Ion diffusion mechanism in mixed organic-inorganic ionic liquid electrolyte leading to high Na+ transference number and stable, high rate electrochemical cycling of sodium cells

Ambient temperature sodium batteries hold the promise of a new generation of high energy density, low-cost energy storage technologies. Particularly challenging in sodium electrochemistry is achieving high stability at high charge/discharge rates. We report here mixtures of inorganic/organic cation fluorosulfonamide (FSI) ionic liquids that exhibit unexpectedly high Na+ transference numbers due to a structural diffusion mechanism not previously observed in this type of electrolyte. The electrolyte can therefore support high current density cycling of sodium. We investigate the effect of NaFSI salt concentration in methylpropylpyrrolidinium (C3mpyr) FSI ionic liquid (IL) on the reversible plating and dissolution of sodium metal, both on a copper electrode and in a symmetric Na/Na metal cell. NaFSI is highly soluble in the IL allowing the preparation of mixtures that contain very high Na contents, greater than 3.2 mol/kg (50 mol %) at room temperature. Despite the fact that overall ion diffusivity decreases substantially with increasing alkali salt concentration, we have found that these high Na+ content electrolytes can support higher current densities (1 mA/cm2) and greater stability upon continued cycling. EIS measurements indicate that the interfacial impedance is decreased in the high concentration systems, which provides for a particularly low-resistance solid-electrolyte interphase (SEI), resulting in faster charge transfer at the interface. Na+ transference numbers determined by the Bruce-Vincent method increased substantially with increasing NaFSI content, approaching >0.3 at the saturation concentration limit which may explain the improved performance. NMR spectroscopy, PFG diffusion measurements, and molecular dynamics simulations reveal a changeover to a facile structural diffusion mechanism for sodium ion transport at high concentrations in these electrolytes.

Polymer architecture effect on sodium ion transport in PSTFSI-based ionomers: a molecular dynamics study

In this study, we investigated the effect of polymer architecture on the ion dynamics and local structure to understand the factors that might lead to the design of highly conductive and mechanically robust polyelectrolytes. Molecular dynamic simulations were undertaken on the sodium poly[(4-styrenesulfonyl) (trifluoromethanesulfonyl) imide] P(STFSINa) homopolymer and its copolymers with either ether or styrene spacer groups to investigate the spacer length and polarity dependence of Na-ion transport. Using a scaled charge model, we observed a continuous ion aggregate network in the homopolymer, which facilitates the fast ion dynamics despite the rigid polymer matrix. The longest spacer groups disrupt this percolating ionic network differently, with the ether group being more disruptive than the styrene group, and leading to more discrete ionic aggregates. The copolymer with the ether spacer was also found to result in an alternative Na-ion diffusion mechanism.