Neighbourhood environment, sitting time and motorised transport in older adults: a cross-sectional study in Hong Kong

OBJECTIVES: Sitting time is a public health concern. This study examined associations of objectively measured neighbourhood environmental attributes with non-transport sitting time and motorised transport in 484 Hong Kong older adults. Neighbourhood attributes encouraging walking may help older adults replace some sitting time at home and on motorised transport with light-to-moderate-intensity activities such as strolling around the neighbourhood or walking to/from neighbourhood destinations. Thus, we hypothesised environmental attributes found to be related to walking would show associations with non-transport sitting time and motorised transport opposite to those seen for walking. DESIGN: Cross-sectional. SETTING: Hong Kong, an ultradense urban environment. PARTICIPANTS: 484 ethnic Chinese Hong Kong residents aged 65+ recruited from membership lists of four Hong Kong Elderly Health Centres representing catchment areas of low and high transport-related walkability stratified by socioeconomic status (response rate: 78%). PRIMARY AND SECONDARY OUTCOME MEASURES: Attributes of participants' neighbourhood environments were assessed by environmental audits, while non-transport sitting time and motorised transport were ascertained using the International Physical Activity Questionnaire-Long Form (Chinese version). RESULTS: Daily non-transport sitting minutes were 283 (SD=128) and motorised transport 23 (SD=28). Prevalence of signs of crime/disorder, streetlights, public facilities (toilets and benches) and pedestrian safety were independently negatively related, and sloping streets positively related, to sitting outcomes. Places of worship in the neighbourhood were predictive of more, and prevalence of public transit points of less, non-transport sitting. Associations of either or both sitting outcomes with prevalence of food/grocery stores and presence of parks were moderated by path obstructions and signs of crime/disorder. CONCLUSIONS: The findings suggest that access to specific destinations and relatively low-cost, minimal impact modifications to the urban form, such as street lighting, public toilets, benches and public transit points, could potentially reduce sitting time and associated negative health outcomes in Hong Kong older adults.

E-learning opportunities and challenges for legal education in rural Victoria

Access to justice extends beyond consideration of the systems and institutions of justice; it includes infrastructure such as transport, health, education and communications. Rural, regional and remote (‘RRR’) communities are more likely to face difficulties in accessing advice and accurate information on laws and processes available for resolution of disputes. Perhaps more fundamentally, they rarely have a voice in effecting reforms in laws and related policies. For several decades, community legal centres, legal aid, courts, and a range of other institutions have used community legal education programs to improve knowledge and access to law and justice systems, services and organisations. The recent Productivity Commission Inquiry into Access to Justice Arrangements notes that, ‘Better coordination and greater quality control in the development and delivery of these [community legal education, legal information] services would improve their value and reach.’ At the same time, research into the professional needs of RRR legal practitioners has found that many of these practitioners face considerable difficulties accessing good quality continuing professional development (‘CPD’) and informal networking/support opportunities.6 Current and emerging internet-based technologies open up opportunities for legal organisations to better meet the educational needs of both rural communities and legal practitioners. Though limitations still exist at multiple levels, relatively low-cost, media-rich, synchronous and tailored education programs can now be delivered effectively in many rural and remote areas. However, complex layers of decisions are required to critically assess, harness and optimise technologies to best suit the needs of users, and to utilise teaching and learning techniques that best match the technologies and participant needs. Getting these elements — needs, technology and learning technique — right, nevertheless offers extraordinary opportunities. Sound decisions and good practices should enable state-wide and specialist law and justice-related services interested in improving their engagement with RRR communities to dramatically improve the reach and quality of outcomes, not only for distant participants but the spectrum of stakeholders.

Gelled ionic liquid sodium ion conductors for sodium batteries

Owing to the unique properties of certain Ionic liquids (ILs) as safe and green solvents, as well as the potential of sodium as an alternative to lithium as charge carriers, we investigate gel sodium electrolytes as safe, low cost and high performance materials with sufficient mechanical properties for application in sodium battery technologies. We investigate the effect of formation of two types of gel electrolytes on the properties of IL electrolytes known to support Na/Na⁺ electrochemistry. The ionic conductivity is only slightly decreased by 0.0005 and 0.0002 S cm^-1 in the case of 0.3 and 0.5 M NaNTf2 systems respectively as the physical properties transition from liquid to gel. We observed facile plating and stripping of Na metal around 0 V vs. Na/Na⁺ through the cyclic voltammetry. A wide-temperature range of the gelled IL state, of more than 100 K around room temperature, is achieved in the case of 0.3 and 0.5 M NaNTf2. We conclude that the formation of a gel does not significantly affect the liquid-like ion dynamics in these materials, as further evidenced by DSC and FTIR analysis.

Development of a novel soft parallel robot equipped with polymeric artificial muscles

This paper presents the design, analysis and fabrication of a novel low-cost soft parallel robot for biomedical applications, including bio-micromanipulation devices. The robot consists of two active flexible polymer actuator-based links, which are connected to two rigid links by means of flexible joints. A mathematical model is established between the input voltage to the polymer actuators and the robot's end effector position. The robot has two degrees-of-freedom, making it suitable for handling planar micromanipulation tasks. Moreover, a number of robots can be configured to operate in a cooperative manner for increasing micromanipulation dexterity. Finally, the experimental results demonstrate two main motion modes of the robot.

Preventing obesity in infants: the growing healthy feasibility trial protocol

INTRODUCTION: Early childhood is an important period for establishing behaviours that will affect weight gain and health across the life course. Early feeding choices, including breast and/or formula, timing of introduction of solids, physical activity and electronic media use among infants and young children are considered likely determinants of childhood obesity. Parents play a primary role in shaping these behaviours through parental modelling, feeding styles, and the food and physical activity environments provided. Children from low socio-economic backgrounds have higher rates of obesity, making early intervention particularly important. However, such families are often more difficult to reach and may be less likely to participate in traditional programs that support healthy behaviours. Parents across all socio-demographic groups frequently access primary health care (PHC) services, including nurses in community health services and general medical practices, providing unparalleled opportunity for engagement to influence family behaviours. One emerging and promising area that might maximise engagement at a low cost is the provision of support for healthy parenting through electronic media such as the Internet or smart phones. The Growing healthy study explores the feasibility of delivering such support via primary health care services.

METHODS: This paper describes the Growing healthy study, a non-randomised quasi experimental study examining the feasibility of an intervention delivered via a smartphone app (or website) for parents living in socioeconomically disadvantaged areas, for promoting infant feeding and parenting behaviours that promote healthy rather than excessive weight gain. Participants will be recruited via their primary health care practitioner and followed until their infant is 9 months old. Data will be collected via web-based questionnaires and the data collected inherently by the app itself.

ETHICS AND DISSEMINATION: This study received approval from the University of Technology Sydney Ethics committee and will be disseminated via peer-reviewed publications and conference presentations.

Prioritizing climate change adaptation options for iconic marine species

© 2015, Springer Science+Business Media Dordrecht. Adaptation options in response to climate impact scenarios for marine mammals and seabirds were developed based on the IPCC vulnerability framework. Under this framework, vulnerability to the physical effects of climate change can be reduced by adaptation options that reduce exposure of individuals, reduce the sensitivity of individuals, and increase the adaptive capacity of individual/species to cope with climate change. We evaluated options in each vulnerability category with three screening tools collectively forming an approach we term sequential adaptation prioritization for species. These tools were designed to evaluate (i) technical aspects (cost-benefit-risk, CBR), (ii) institutional barriers, and (iii) potential social acceptability. The CBR tool identified which adaptation options were high cost and low benefit, might be discarded, and which were high benefit and low cost, might be rapidly implemented (depending on risk). Low cost and low benefit options might not be pursued, while those that are high cost, but high benefit deserve further attention. Even with technical merit, adaptation options can fail because of institutional problems with implementation. The second evaluation tool, based on the conceptual framework on barriers to effective climate adaptation, identifies where barriers may exist, and leads to strategies for overcoming them. Finally, adaptation options may not be acceptable to society at large, or resisted by vocal opponents or groups. The social acceptability tool identifies potentially contested options, which may be useful to managers charged with implementing adaptation options. Social acceptability, as scored by experts, differed from acceptability scored by the public, indicating the need to involve the public in assessing this aspect. Scores from each tool for each scenario can be combined to rank the suite of adaptation options. This approach provides useful tools to assist conservation managers in selecting from a wide range of adaptation strategies; the methodology is also applicable to other conservation sectors.

Mobile phone-based electrochemiluminescence sensing exploiting the 'USB On-The-Go' protocol

A low-cost system to generate, control and detect electrochemiluminescence using a mobile smartphone is described. A simple tone-detection integrated circuit is used to switch power sourced from the phone's Universal Serial Bus (USB) 'On-The-Go' (OTG) port, using audible tone pulses played over the device's audio jack. We have successfully applied this approach to smartphones from different manufacturers and with different operating system versions. ECL calibrations of a common luminophore, tris(2,2′-bipyridine)ruthenium(II) ([Ru(bpy)3]²⁺), with 2-(dibutylamino)ethanol (DBAE) as a co-reactant, showed no significant difference in light intensities when an electrochemical cell was controlled by a mobile phone in this manner, compared to the same calibration generated using a conventional potentiostat. Combining this novel approach to control the applied potential with the measurement of the emitted light through the smart phone camera (using an in-house built Android app), we explored the ECL properties of a water-soluble iridium(III) complex that emits in the blue region of the spectrum. The iridium(III) complex exhibited superior co-reactant ECL intensities and limits of detection to that of the conventional [Ru(bpy)3]²⁺ luminophore.

Potential-resolved electrogenerated chemiluminescence for the selective detection of multiple luminophores

Electrogenerated chemiluminescence (ECL) is fundamentally dependent on the applied electrode potential, and measuring ECL intensity over a range of different potentials is commonly used to examine the underlying chemical reaction pathways responsible for the emission of light. Several research groups have now demonstrated that the applied potential can be exploited to selectively elicit ECL from: 1) multiple excited states within a single chemical species; 2) multiple emitters sharing a common co-reactant; or 3) distinct ECL systems. This new generation of multiplexed ECL processes has been facilitated by the extensive development of novel electrochemiluminophores and instrumental approaches such as the near-continuous collection of ECL spectra with CCD detectors during voltammetry or chronoamperometry experiments. New dimensions: In electrogenerated chemiluminescence experiments the applied potential can be exploited to selectively elicit light from: multiple excited states within a single chemical species, multiple emitters sharing a common co-reactant, and distinct electrogenerated chemiluminescence systems. These findings may be used to develop low-cost portable analytical devices.

Additive manufacturing technologies : 3D printing, rapid prototyping, and direct digital manufacturing

This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.

Self-assembled V2O5 interconnected microspheres produced in a fish-water electrolyte medium as a high-performance lithium-ion-battery cathode

Interconnected microspheres of V2O5 composed of ultra-long nanobelts are synthesized in an environmental friendly way by adopting a conventional anodization process combined with annealing. The synthesis process is simple and low-cost because it does not require any additional chemicals or reagents. Commercial fish-water is used as an electrolyte medium to anodize vanadium foil for the first time. Electron microscopy investigation reveals that each belt consists of numerous nanofibers with free space between them. Therefore, this novel nanostructure demonstrates many outstanding features during electrochemical operation. This structure prevents self-aggregation of active materials and fully utilizes the advantage of active materials by maintaining a large effective contact area between active materials, conductive additives, and electrolyte, which is a key challenge for most nanomaterials. The electrodes exhibit promising electrochemical performance with a stable discharge capacity of 227 mAh·g–1 at 1C after 200 cycles. The rate capability of the electrode is outstanding, and the obtained capacity is as high as 278 at 0.5C, 259 at 1C, 240 at 2C, 206 at 5C, and 166 mAh·g–1 at 10C. Overall, this novel structure could be one of the most favorable nanostructures of vanadium oxide-based cathodes for Li-ion batteries. [Figure not available: see fulltext.]

Secure ownership transfer for multi-tag multi-owner passive RFID environment with individual-owner-privacy

In this paper we propose a secure ownership transfer protocol for a multi-tag multi-owner RFID environment that provides individual-owner-privacy. To our knowledge, the existing schemes do not provide individual-owner-privacy and most of the existing schemes do not comply with the EPC Global Class-1 Gen-2 (C1G2) standard since the protocols use expensive hash operations or sophisticated encryption schemes that cannot be implemented on low-cost passive tags that are highly resource constrained. Our work aims to fill these gaps by proposing a protocol that provides individual-owner-privacy, based on simple XOR and 128-bit pseudo-random number generators (PRNG), operations that are easily implemented on low-cost RFID tags while meeting the necessary security requirements thus making it a viable option for large scale implementations. Our protocol also provides additional protection by hiding the pseudo-random numbers during all transmissions using a blind-factor to prevent tracking attacks.

Lab-on-a-chip or chip-in-a-lab: challenges of commercialization lost in translation

Lab-on-a-chip technology has been long envisaged to have tremendous commercial potential, owing to the ability of such devices to encapsulate a full range of laboratory processes in a single instrument and operate in a portable manner, rapidly and at low cost. Devices are believed to have potential in fields ranging across medical diagnostics, environmental sampling and a range of consumer products, however, to date very few devices have attained commercial success. This review examines the challenges relating to the commercialization of lab-on-a-chip technology from fundamental research to mass manufacturing and aims to provide insight to both academics and product development specialists the perceived hindrances to commercialization and a strategy by which future work could be translated into commercial success.

Novel Na+ Ion diffusion mechanism in mixed organic-inorganic ionic liquid electrolyte leading to high Na+ transference number and stable, high rate electrochemical cycling of sodium cells

Ambient temperature sodium batteries hold the promise of a new generation of high energy density, low-cost energy storage technologies. Particularly challenging in sodium electrochemistry is achieving high stability at high charge/discharge rates. We report here mixtures of inorganic/organic cation fluorosulfonamide (FSI) ionic liquids that exhibit unexpectedly high Na+ transference numbers due to a structural diffusion mechanism not previously observed in this type of electrolyte. The electrolyte can therefore support high current density cycling of sodium. We investigate the effect of NaFSI salt concentration in methylpropylpyrrolidinium (C3mpyr) FSI ionic liquid (IL) on the reversible plating and dissolution of sodium metal, both on a copper electrode and in a symmetric Na/Na metal cell. NaFSI is highly soluble in the IL allowing the preparation of mixtures that contain very high Na contents, greater than 3.2 mol/kg (50 mol %) at room temperature. Despite the fact that overall ion diffusivity decreases substantially with increasing alkali salt concentration, we have found that these high Na+ content electrolytes can support higher current densities (1 mA/cm2) and greater stability upon continued cycling. EIS measurements indicate that the interfacial impedance is decreased in the high concentration systems, which provides for a particularly low-resistance solid-electrolyte interphase (SEI), resulting in faster charge transfer at the interface. Na+ transference numbers determined by the Bruce-Vincent method increased substantially with increasing NaFSI content, approaching >0.3 at the saturation concentration limit which may explain the improved performance. NMR spectroscopy, PFG diffusion measurements, and molecular dynamics simulations reveal a changeover to a facile structural diffusion mechanism for sodium ion transport at high concentrations in these electrolytes.