Protection of silica-coated ZnO nanoparticles on pre-dyed polyester fabrics against photofading

This work was designed to investigate the ability of silica-coated ZnO (ZnO&SiO2) nanoparticles (NPs) as ultraviolet (UV) absorbers for protecting pre-dyed polyester fabrics against photofading. Despite that ZnO NPs are excellent UV absorbers, their strong photocatalytic activity limits the application in UV protection. In this study, a silica layer was coated onto ZnO NPs to form a physical barrier between the ZnO and a polyester substrate, which allowed effective UV shielding while minimising the harmful effects of photocatalytic activity on the substrate. The structure and optical proprieties of ZnO&SiO2 NPs were observed. The bare ZnO and ZnO&SiO2 NPs were, respectively, applied to polyester fabrics coloured with three kinds of dyes by a dip coating method. The photofading level of treated fabrics after exposure under simulated sunlight was evaluated. The ZnO&SiO2 NPs exhibited excellent protection on pre-dyed polyester fabrics against photofading.

Change in dielectric properties in the microwave frequency region of polypyrrole-coated textiles during aging

Complex permittivity of conducting polypyrrole (PPy)-coated Nylon-Lycra textiles ismeasured using a free space transmission measurement technique over the frequency range of1–18 GHz. The aging of microwave dielectric properties and reflection, transmission and absorptionfor a period of 18 months is demonstrated. PPy-coated fabrics are shown to be lossy over thefull frequency range. The levels of absorption are shown to be higher than reflection in the testedsamples. This is attributed to the relatively high resistivity of the PPy-coated fabrics. Both the dopantconcentration and polymerisation time affect the total shielding effectiveness and microwave agingbehaviour. Distinguishing either of these two factors as being exclusively the dominant mechanismof shielding effectiveness is shown to be difficult. It is observed that the PPy-coated Nylon-Lycrasamples with a p-toluene sulfonic acid (pTSA) concentration of 0.015 M and polymerisation times of60 min and 180 min have 37% and 26% decrease in total transmission loss, respectively, upon agingfor 72 weeks at room temperature (20 C, 65% Relative humidity (RH)). The concentration of thedopant also influences the microwave aging behaviour of the PPy-coated fabrics. The samples with ahigher dopant concentration of 0.027 mol/L pTSA are shown to have a transmission loss of 32.6% and16.5% for short and long polymerisation times, respectively, when aged for 72 weeks. The microwaveproperties exhibit better stability with high dopant concentration and/or longer polymerization times.High pTSA dopant concentrations and/or longer polymerisation times result in high microwaveinsertion loss and are more effective in reducing the transmission and also increasing the longevity ofthe electrical properties.

Modulated deformation of lipid membrane to vesicles and tubes due to reduction of graphene oxide substrate under laser irradiation

Biomembrane transformations are closely related to many biological processes including endo/exocytosis and the cellular response to the local physical environment. In this work, we investigated the transformation between lipid membranes and lipid vesicles/tubes modulated by the solid substrate of graphene oxide (GO) aggregates under laser irradiation. We firstly fabricate a novel type of lipid@GO composite consisting of micrometer-sized GO aggregates surrounded by lamellar lipid membranes. Upon laser irradiation, lipid protrusion occurs and leads to the formation of vesicles adsorbed on the GO aggregate surface, with an average size as 0.43 times of the radius of GO aggregate. Both the location and the dynamic formation process of vesicles can be modulated. The arising of vesicles prefers to occur at edges of the GO planes rather than on surface of individual GO sheets within the GO aggregate. Furthermore, at a reduced laser power density, the lipid protrusion mainly grows to tubes instead of vesicles. Such transformations from lipid membrane to vesicles and tubes is ascribed to the reduction of GO to reduced-GO (rGO) under laser irradiation, probably along with the release of gases leading to the deformation of lipid membrane surrounding the GO surface.

Effect of elemental metals and strontium coated surface on biocompatibility of titanium-based biomaterials.

This thesis developed a two-step hydrothermal treatment to modify titanium materials,which is very useful for improving the osteointegration of titanium materials. The cellular responses of SaOS2 cells to seventeen element discs were assessed across the different elements. The cell responses to different elemental metals showed that using appropriate concentrations of these elements are critical for designing good Ti-based biomaterials for implants due to the dose-dependent cytotoxicity of each element.