Variant selection and intervariant crystallographic planes distribution in martensite in a Ti-6Al-4V alloy

The transformation texture was studied in a Ti-6Al-4V alloy for two microstructures produced through different phase transformation mechanisms (i.e. diffusional vs. displacive). Both microstructures revealed qualitatively similar crystallographic texture characteristics, having two main texture components with Euler angles of (90°, 90°, 0°) and (90°, 30°, 0°). However, the overall α texture strength was considerably weaker in the martensitic structure (i.e. displacive mechanism) compared with the α + β microstructure produced through slow cooling (i.e. diffusional mechanism). The intervariant boundary distribution in martensite mostly revealed five misorientations associated with the Burgers orientation relationship. The five-parameter boundary analysis also showed a very strong interface plane orientation texture, with interfaces terminated mostly on the prismatic planes {hki0}, when misorientation was ignored. The highest intervariant boundary populations belonged to the 63.26°/[10 553 ] and 60°/[112 0] misorientations, with length fractions of 0.38 and 0.3, respectively. The former was terminated on (41 3 0), and the latter was a symmetric tilt boundary, terminated on (1 011). The intervariant plane distribution in martensite was determined more by the constraints of the phase transformation than by the relative interface energies.

Deformation behaviour of a commercial pure titanium alloy during hot compression testing

The flow curve behaviour and microstructure evolution of commercially pure titanium (CP-Ti) through uniaxial hot compression was investigated at 850 °C and a strain rate of 0.1/s. Electron back scattered diffraction (EBSD) was employed to characterize the microstructure and crystallographic texture development for different thermomechanical conditions. The stress-strain curves of CP-Ti alloy under hot compression displayed a typical flow behaviour of metals undergoing dynamic recrystallization (DRX), which resulted in grain refinement. The critical strain for the onset of DRX was 0.13 using the double differentiation analysis technique. It was also revealed that the texture was markably altered during hot deformation. © (2014) Trans Tech Publications, Switzerland.

Microstructure evolution of martensitic Ti-6Al-4V alloy during warm deformation

The microstructure evolution of martensitic Ti-6Al-4V alloy was investigated through uniaxial hot compression at 700°C and a strain rate of 10-3 s-1. A combination of scanning electron microscopy observation in conjunction with high resolution electron back scattered diffraction (EBSD) was used to characterize the microstructure in detail. The development of the microstructure displayed continuous fragmentation of martensitic laths with increasing strain (i.e. continuous dynamic recrystallization), concurrently with decomposition of supersaturated martensite resulting in the formation of equiaxed grains. At a strain of 0.8, an ultrafine equiaxed grained structure with mostly high angle grain boundaries was successfully obtained. The current work proposes a novel approach to produce equiaxed ultrafine grains in a Ti-6Al-4V alloy through thermomechanical processing of a martensitic starting microstructure. © (2014) Trans Tech Publications, Switzerland.

Medical tourism and health worker migration in developing countries

In developing countries of tourist destinations, an increase in medical tourism raises the wages in the medical tourism sector, thereby retaining skilled medical workers who otherwise leave the country. However, the expansion of medical tourism contracts the domestic healthcare services sector, causing lower labor productivity in the economy. Medical tourism can increase domestic welfare if the benefits from migration retention and tourism exports outweigh the losses in revenue and productivity declines.

A Novel Mo and Nb Microalloyed Medium Mn TRIP Steel with Maximal Ultimate Strength and Moderate Ductility

The multi-phase, metastable, and multi-scale (M3) constitution of a novel transformation-induced plasticity (TRIP) steel (Fe-0.17C-6.5Mn-1.1Al-0.22Mo-0.05Nb, wt pct) was designed through thermodynamic calculations combined with experimental analysis. In this study, Mo and Nb microalloying was used to control the fraction of retained austenite and its mechanical stability during tensile deformation and to improve the yield strength. Thermodynamic calculations were developed to determine the critical annealing temperature, at which a large fraction of retained austenite (~38 pct) would be obtained through the effects of solute enrichment. The experimental observation was in good agreement with the predicted results. According to the critical annealing temperature, such an ultrafine (<200 nm) M3, microstructure with optimum mechanical stability was successfully achieved. The results of this work demonstrated the superior performance with improved yield strength of 1020 to 1140 MPa and excellent ductility (>30 pct), as compared with other TRIP steels. Both angle-selective backscatter and electron backscatter diffraction techniques were employed to interpret the transformation from the deformed martensitic laths to the ultrafine austenite and ferrite duplex structure.

Sulfur-impregnated, sandwich-type, hybrid carbon nanosheets with hierarchical porous structure for high-performance lithium-sulfur batteries

Sandwich-type hybrid carbon nanosheets (SCNMM) consisting of graphene and micro/mesoporous carbon layer are fabricated via a double template method using graphene oxide as the shape-directing agent and SiO2 nanoparticles as the mesoporous guide. The polypyrrole synthesized in situ on the graphene oxide sheets is used as a carbon precursor. The micro/mesoporous strcutures of the SCNMM are created by a carbonization process followed by HF solution etching and KOH treatment. Sulfur is impregnated into the hybrid carbon nanosheets to generate S@SCNMM composites for the cathode materials in Li-S secondary batteries. The microstructures and electrochemical performance of the as-prepared samples are investigated in detail. The hybrid carbon nanosheets, which have a thickness of about 10-25 nm, high surface area of 1588 m2 g-1, and broad pore size distribution of 0.8-6.0 nm, are highly interconnected to form a 3D hierarchical structure. The S@SCNMM sample with the sulfur content of 74 wt% exhibits excellent electrochemical performance, including large reversible capacity, good cycling stability and coulombic efficiency, and good rate capability, which is believed to be due to the structure of hybrid carbon materials with hierarchical porous structure, which have large specific surface area and pore volume.

A C-DBSCAN algorithm for determining bus-stop locations based on taxi GPS data

Determining suitable bus-stop locations is critical in improving the quality of bus services. Previous studies on selecting bus stop locations mainly consider environmental factors such as population density and traffic conditions, seldom of them consider the travel patterns of people, which is a key factor for determining bus-stop locations. In order to draw people’s travel patterns, this paper improves the density-based spatial clustering of applications with noise (DBSCAN) algorithm to find hot pick-up and drop-off locations based on taxi GPS data. The discovered density-based hot locations could be regarded as the candidate for bus-stop locations. This paper further utilizes the improved DBSCAN algorithm, namely as C-DBSCAN in this paper, to discover candidate bus-stop locations to Capital International Airport in Beijing based on taxi GPS data in November 2012. Finally, this paper discusses the effects of key parameters in C-DBSCAN algorithm on the clustering results. Keywords Bus-stop locations, Public transport service, Taxi GPS data, Centralize density-based spatial clustering of applications with noise.

Reducing youth screen time: Qualitative metasynthesis of findings on barriers and facilitators.

An integrated perspective on the relevant qualitative findings on the experience of screen time in youth can inform the development of hypotheses to be tested in future research and can guide the development of interventions to decrease sedentary behavior. The purpose of this qualitative metasynthesis was to explore parent, youth, and educational professionals' perceptions of barriers to, and facilitators of, reducing youth screen time.

Environmental impacts of tariff and tax reforms under origin and destination principles

The impacts of a point-by-point tariff/tax reform on the environment under the origin-based or destination-based tax principle are examined. The policy reform under the origin-based principle can raise the optimal pollution tax and, hence, improve the environment when the consumption demand and pollution are strongly substitutable, whereas the reform under the destination-based principle lowers the optimal pollution tax and, hence, worsens the environment. Nonetheless, when the consumption demand and pollution exhibit weak substitutes or even complements, the tariff/tax reform results in less environmental deterioration under the destination-based principle.

Grain refinement in titanium alloys through thermomechanical processing

Qi developed a novel thermomechanical processing route for the grain refinement of titanium alloys. This leads to a well-balanced superior mechanical property, which is vital for modern air transport. The outcomes of this project are prospective to enhance titanium application and the long-term viability of Australian resources and manufacturing industries.

Pollution, health and economic growth

This paper examines the growth impacts of aid allocation on healthcare and pollution abatement in an endogenous growth model, and finds that the aid tied to them contributes positively to the equilibrium growth rate. Nonetheless, the growth rate can be reduced or even impaired if the ratio of aid on pollution abatement is lowered.

Tourism, Dutch disease and welfare in an open dynamic economy

This chapter examines the effects of an expansion in tourism on capital accumulation, sectoral output and resident welfare in an open economy with an externality in the traded good sector. An expansion of tourism increases the relative price of the non traded good, improves the tertiary terms-of-trade and hence yields a gain in revenue. However, this increase in the relative price of non traded goods results in a lowering of the demand for capital used in the traded sector. The subsequent de-industrialization in the traded good sector may lower resident welfare. This result is supported by numerical simulations. © 2011 Nova Science Publishers, Inc.

Wage inequality and welfare in developing countries: privatization and reforms in the short and long run

The impacts of privatization on wage inequality and welfare are considered for developing countries. In the short run, privatization can narrow wage inequality but reduce output of public firms. However, the favorable effect of privatization on lowering wage inequality vanishes in the long run due to the excessive entry of public firms. Thus, a policy recommendation for privatization would be: to avoid rising wage inequality, entry regulation of public firms should be imposed in the short run, and to mitigate the output contraction, complementary structural changes or policy reforms are needed in the transitional period of privatization.

Expected shannon entropy and shannon differentiation between subpopulations for neutral genes under the finite island model

Shannon entropy H and related measures are increasingly used in molecular ecology and population genetics because (1) unlike measures based on heterozygosity or allele number, these measures weigh alleles in proportion to their population fraction, thus capturing a previously-ignored aspect of allele frequency distributions that may be important in many applications; (2) these measures connect directly to the rich predictive mathematics of information theory; (3) Shannon entropy is completely additive and has an explicitly hierarchical nature; and (4) Shannon entropy-based differentiation measures obey strong monotonicity properties that heterozygosity-based measures lack. We derive simple new expressions for the expected values of the Shannon entropy of the equilibrium allele distribution at a neutral locus in a single isolated population under two models of mutation: the infinite allele model and the stepwise mutation model. Surprisingly, this complex stochastic system for each model has an entropy expressable as a simple combination of well-known mathematical functions. Moreover, entropy- and heterozygosity-based measures for each model are linked by simple relationships that are shown by simulations to be approximately valid even far from equilibrium. We also identify a bridge between the two models of mutation. We apply our approach to subdivided populations which follow the finite island model, obtaining the Shannon entropy of the equilibrium allele distributions of the subpopulations and of the total population. We also derive the expected mutual information and normalized mutual information ("Shannon differentiation") between subpopulations at equilibrium, and identify the model parameters that determine them. We apply our measures to data from the common starling (Sturnus vulgaris) in Australia. Our measures provide a test for neutrality that is robust to violations of equilibrium assumptions, as verified on real world data from starlings.