Comparisons of sidewall correction of bed shear stress in open-channel flows

When investigating sediment transport in laboratory open-channel flows, it is often necessary to remove sidewall effects for computing effective bed shear stress. Previous sidewall correction methods are subject to some assumptions that have not been completely verified, and different values of the bed shear stress may be obtained depending on the approach used in making sidewall corrections. This study provides a quantitative assessment of the existing correction procedures by comparing them to a new sidewall correction model proposed in this study. The latter was derived based on the shear stress function and equivalent roughness size for both rigid and mobile bed conditions, which were obtained directly from experimental measurements. The comparisons show that the Einstein correction formula and the Vanoni and Brooks method generally predict relatively lower and higher bed shear stresses, respectively, while the Williams’ empirical function leads to more scatter. This study also demonstrates that the widely used Vanoni and Brooks approach can be well approximated by a simple formula derived based on the Blasius resistance function. The sidewall effects, when removed in the different ways, would consequently affect the presentation of the bedload function. Experimental results of bedload transport, when plotted as the dimensionless transport rate against the dimensionless shear stress with the latter being corrected using the present model, exhibit less scatter than those associated with the previous procedures.

Simplified physically based model for estimating effective floc density

This paper applies dimensional analysis to propose an alternative model for estimating the effective density of flocs (Δρf). The model takes into account the effective density of the primary particles, in addition to the sizes of the floc and primary particles, and does not consider the concept of self-similarity. The model contains three dimensionless products and two empirical parameters (αf and βf), which were calibrated by using data available in the literature. Values of αf=0.7 and βf=0.8 were obtained. The average value of the primary particle size (Dp) for the data used in the analysis, inferred from the new model, was found to vary from 0.05 μm to 100 μm with a mean value of 2.5 μm. Good comparisons were obtained in comparing the estimated floc-settling velocity on the basis of the proposed model for effective floc density with the measured value.

Use of the wound-inducible NtQPT2 promoter from Nicotiana tabacum for production of a plant-made vaccine

The wound-inducible quinolinate phosphoribosyl transferase promoter from Nicotiana tabacum (NtQPT2) was assessed for its capacity to produce B-subunit of the heat-labile toxin (LTB) from enterotoxigenic Escherichia coli in transgenic plant tissues. Comparisons were made with the widely used and constitutive Cauliflower Mosaic Virus 35S (CaMV35S) promoter. The NtQPT2 promoter produced somewhat lower average concentrations of LTB protein per unit weight of hairy root tissue but allowed better growth thereby producing similar or higher overall average yields of LTB per culture batch. Transgenic tobacco plants containing the NtQPT2-LTB construct contained LTB protein in roots but not leaves. Moreover, wounding NtQPT2-LTB transgenic plants, by removal of apices, resulted in an approximate 500% increase in LTB levels in roots when analysed several days later. CaMV35S-LTB transgenic plants contained LTB protein in leaves and roots but wounding made no difference to their LTB content.

Freshwater influences on hydrology and seagrass dynamics of intermittent estuaries

Many temperate estuaries have intermittently open and closed mouths, a feature that is often related to intermittent freshwater input. These systems, often overlooked due to their small size, can have large hydrological variability over medium-term time scales.

This variability presents potential difficulties for estuarine species particularly where anthropogenic alterations to freshwater flows can cause large deviations from natural patterns of tidal influence and inundation of habitat.

Influences of natural and hydrological variability on seagrasses were examined in two central Victorian estuaries with anthropogenically-modified but naturally-intermittent freshwater flows and mouth openings. Comparisons were focused on differences between an estuary with artificially-augmented freshwater inflow and an adjacent system, in which the volume and timing of inflows were altered by a reservoir. Eight additional estuaries in the region were also used to provide a context for these two main sites.

Hydrological changes during the three-year field component were affected by the ending of a drought and then a major flood a year later as well as by ongoing anthropogenic flow reduction and augmentation. These influences on hydrology were associated with an initially high seagrass coverage that was substantially reduced and showed signs of recovery only in the system that was affected by lower inflows. Such influences and responses also changed seasonally but to a much lesser extent than the responses to stochastic climatic events.

Natural flows were intermittent and varied substantially between years. Flooding flows represented up to 89% of the long-term annual average flow. Water quality was broadly typical of the region, with the exception of low pH in some tributaries, especially those of Anglesea estuary. Anthropogenic changes to flow were most evident at times of low natural flows and resulted in longer and more frequent periods of zero inflow to Painkalac estuary and a continual base flow to Anglesea. This base flow, from ponds containing coal ash, neutralised waters flowing from upstream and increased conductivity, except at times of high natural flow.

A three-state conceptual model of the magnitude and variability of water levels, based largely on the degree of tidal influence was identified and quantitatively assessed for the two estuaries that were the main focus of the study. These states in turn had a large influence on the area and inundation of benthic habitat. Floods tended to open the mouths of estuaries, which then remained tidal given sufficient flow to overcome sedimentary processes at the mouths. Low and zero inflow was a precondition for closure of the mouths of the estuaries. When closed, differences in inflow resulted in different endpoints in salinity patterns. From an initial pattern similar to a classic ‘salt wedge’, Painkalac estuary, with reduced inflow, quickly destratified and gradually became more saline, at times hypersaline. Anglesea estuary, with augmented flow, tended to remain stratified for longer until becoming completely fresh, given a long enough period of closure.

Episodic changes in the water quality of the estuaries were associated with different components of the freshwater flow regimes. At high flows, fresh waters of low pH with a high metal load entered Anglesea estuary. Except during the largest flood, when the estuary was completely flushed, this water was neutralised at the halocline and resulting in precipitation of metals. High flows into Painkalac were associated with elevated concentrations of clay-sourced suspended solids. During a closed period, with zero flow, a release of sediment-bound nutrients triggered by anoxia was observed in Painkalac, followed by an algal bloom.

The large decline in seagrass extent that was observed in both estuaries was closely related to floods and the subsequent reductions in potential habitat associated with the tidal states that followed. Analysis of historical patterns of extent against rainfall records suggested that periods of drought and extended mouth closures were related to establishment and expansion of beds. This model was similar to that described for South African estuaries and contrasted with more-seasonal patterns reported for local marine embayments.

Rates of in situ decomposition of seagrass detritus showed a mix of seasonal and disturbance-driven patterns of change, depending on estuary. Variability of these rates on a scale of 100s of metres was typically not significant, but there were a few episodes that were highly significant. A negative correlation between decomposition rate and seagrass extent was also observed. A novel technique for assessing cellulose decomposition potential in sediment, adapted from soil science, proved to be a useful tool for estuarine research. Results from this component of the study highlighted both small-scale variability that was inconsistent through time, and also stable differences in decomposition potential between depths and estuaries that were consistent with differences in hydrological state and salinity.

Given the relative lack of knowledge about processes in intermittent estuaries, particularly those relating to changes in freshwater inflow, results from this study will be of value both locally and for similar systems elsewhere. Locally, it is likely that flow regimes to both Anglesea and Painkalac estuaries will be reduced, following closure of the mine power station at Anglesea and due to increased demand from the reservoir above Painkalac. There is potential to manage flows from each of these sources to minimise downstream effects. Regionally, and globally, there are many intermittent estuaries in areas with Mediterranean-type climates. It has been predicted that the climates of these regions will become drier but with an increase in intensity of storm events, both of which have ramifications for flow regimes to estuaries. It is hoped that results of this study will contribute to more informed management of intermittent estuaries in the context of these likely changes.

Segmenting Australian online panellists based on volunteering motivations

Purpose– The purpose of this paper is to seek to assess whether online commercial panel volunteering can be segmented based on their motivations, using the volunteer functions inventor. The authors also investigate whether segments exist which differ in demographic characteristics.Design/methodology/approach– The authors survey 484 Australian online panel volunteers using a adapted version of the 30 item of the volunteer function inventory (VFI) scale developed by Clary et al. (1998). Data were analysed using confirmatory factor analysis (CFA) and cluster analysis, as well as ANOVA and χ2 test comparisons of demographics between clusters.Findings– CFA verifies that the VFI scale is suitable instrument to gauge online participants’ motivations. Cluster analysis produced a five-cluster solution, where respondents with low motivations overall comprised the largest grouping. Segments are interpreted by assessing the difference between the total sample average and the segment profile. The examination also identifies that the only demographic factor that varies across the five clusters is “respondents” employment status”.Research limitations/implications– Future research could explore if differences in segments result in differences in online participation. The high number or respondents with low motivations may explain the relatively high levels of churn that take place within online panels and as a result panel operators would need to continually attract new members. Further research could also investigate whether the levels of motivation change over time and if so what effect such variation would produce on respondents’ retention.Originality/value– Research on online panel respondents’ motivation is still limited and investigating online panellists’ motivation as volunteers is very important as it unveils, as in the study herein reported, that alternative types of respondents may be driven by different factors when joining an online panel (or completing a given survey). Recruitment strategies could, therefore, be shaped to suit the motivation of the different segments. By refining the matching between volunteers’ profiles and their motivation, managers could improve how volunteers are recruited, managed and retained.

Indices for cashmere fleece competition and across farm comparisons: The role of staple length in identifying goats of higher cashmere production

A single focus on mean fibre diameter (MFD, μm) as the definition of cashmere quality overlooks the effects of fibre length, softness and fibre curvature on cashmere processing, textile quality and consumer acceptance. Many farmers overlook the importance of cashmere staple length (SL, cm) in their fleece assessments. We aimed to determine the importance of SL in comparison with MFD when evaluating cashmere production and to identify how across farm comparisons of cashmere fleeces can be objectively undertaken. A sample of 1244 commercial cashmere fleeces from goats originating from many Australian farms was used. Least squares models, relating the logarithm of clean cashmere production (CCMwt, g) to MFD and SL, were fitted. Six years of data from the Australian cashmere industry between farm fleece competitions were analysed to determine the relation between CCMwt and MFD. In the research flocks, adjusting CCMwt of individual goats across farms for MFD only accounted for 2% of the variance, whereas SL accounted for 39% of the variance. The least squares additive model involving only SL was: log10(CCMwt)=1.570+0.06010×SL. Thus CCMwt was proportional to: 100.06010×SL=1.1484SL. It was appropriate to adjust CCMwt for SL by a factor 1/1.1484(SL-SL0) where SL0 is a standard SL of 7.5cm. The between farm index for cashmere weight equals: cleancashmerestaplelengthindex=2.823×CCMwt/1.1484SL. For industry fleece competitions, regression analysis indicated that there was no association between cashmere production and MFD (P=0.81), similar to the research data. Adjusting CCMwt for MFD in across farm comparison and fleece competitions appears to be ineffective. For farm comparisons and in fleece competitions it is important to assess cashmere SL. The use of the Clean Cashmere Staple Length Index will provide a more robust comparison of cashmere productivity between farms as it is an indirect indicator of desirable skin secondary follicle development. The results have application in development projects where obtaining a cashmere MFD test is costly or unavailable. © 2013 Elsevier B.V.

Comparisons in representational media use in design studios between Hong Kong and Australia

Representational media-analogue, physical, digital, or virtual-are employed by students in the conception, development and presentation. In 2013 a survey at two architectural schools was conducted to study the current representational media use in design studios. The survey examined the role digital and physical media play in students' design work and how students use the various media to generate and communicate their designs. This study presents its importance through the shift in architectural education whereby digital tools are not taught per se any longer, however expected to be mastered throughout the course. Yet students' learning experiences are strongly dependant on the successful acquisition of skills and its transfer to deep learning. Especially architectural design studios build upon the premises that re-representation leads to a better acquisition of knowledge. Architectural educators may use the study to revisit their studio and reposition the role of media as well as align learning outcomes, deliverables and communication tools with the actual workingand learning-styles of students. © 2014, The Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), Hong Kong.

A Cross-Cultural Evaluation of the Personal Wellbeing Index – School Children in Samples of Australian and Portuguese Adolescents

The practice of comparing nations on subjective wellbeing (SWB) is becoming commonplace, with many countries ranked by economists and social scientists alike according to average levels of SWB based on survey responses. Such large, multi-national population surveys have the potential to generate insights into the causes and correlates of SWB within different cultural groups, as well as inform policy regarding how to improve the wellbeing of citizens. At the heart of these large-scale research endeavors are SWB measures that function equivalently between the various participating cultural groups. For this reason, it is concerning that their remains a paucity of research that supports measurement equivalence for many SWB instruments commonly employed. Thus, it remains unclear whether variations in SWB across cultures reflect true differences, or whether these differences reflect measurement biases (e.g., response bias inherent within a particular cultural group). The aim of this study was to examine the psychometric equivalence of the Personal Wellbeing Index–School Children (PWI-SC) in convenience samples of Australian and Portuguese adolescents using multiple-group confirmatory factor analysis. Participants comprising the Australian sample were 1104 Victorian high-school students aged between 12 and 19 years (M = 14.42, SD = 1.63). Participants comprising the Portuguese sample were 573 high-school students living in Portugal aged between 12 and 18 years (M = 14.32, SD = 1.72). The results demonstrated strict factorial invariance between both versions of the PWI-SC, suggesting that this scale measures the same underlying construct in both samples. Moreover, these findings provide preliminary support for quantitative comparisons between Australian and Portuguese adolescents on the SWB variable as valid.

Statistical comparisons of non-deterministic IR systems using two dimensional variance

Retrieval systems with non-deterministic output are widely used in information retrieval. Common examples include sampling, approximation algorithms, or interactive user input. The effectiveness of such systems differs not just for different topics, but also for different instances of the system. The inherent variance presents a dilemma - What is the best way to measure the effectiveness of a non-deterministic IR system? Existing approaches to IR evaluation do not consider this problem, or the potential impact on statistical significance. In this paper, we explore how such variance can affect system comparisons, and propose an evaluation framework and methodologies capable of doing this comparison. Using the context of distributed information retrieval as a case study for our investigation, we show that the approaches provide a consistent and reliable methodology to compare the effectiveness of a non-deterministic system with a deterministic or another non-deterministic system. In addition, we present a statistical best-practice that can be used to safely show how a non-deterministic IR system has equivalent effectiveness to another IR system, and how to avoid the common pitfall of misusing a lack of significance as a proof that two systems have equivalent effectiveness.

The influence of rare earth mercaptoacetate on the initiation of corrosion on AA2024-T3 Part I: average statistics of each intermetallic composition

De-alloying of S-phase in AA2024-T3 in the presence chlorides, is well-known. However, it is unclear how rare earth mercaptoacetate inhibitors affect this process when immersed in a 0.1. M NaCl solution. This paper analyses data obtained using EPMA on AA2024-T3 surfaces before and after a 16. min immersion period. Cerium and praseodymium mercaptoacetate inhibited the de-alloying process of S-phase particles. Although no significant change in composition was observed for cathodic intermetallics, each appeared to participate in local corrosion reactions as evidenced by the development of surface oxides. Clustering between S-phase and one of the Cu-containing intermetallic domains was also evident.

Habitat switching by Bewick's swans: Maximization of average long-term energy gain?

1. In a system where depletion drives a habitat shift, the hypothesis was tested that animals switch habitat as soon as the average daily net energy intake (or gain) drops below that attainable in the alternative habitat.

2. The study was performed in the Lauwersmeer area. Upon arrival during the autumn migration, Bewick's swans first feed on below-ground tubers of fennel pondweed on the lake, but subsequently switched to feeding on harvest remains in sugar beet fields.

3. The daily energy intake was estimated by multiplying the average time spent foraging per day with the instantaneous energy intake rate while foraging. In the case of pondweed feeding, the latter was estimated from the functional response and the depletion of tuber biomass. In the case of beet feeding, it was estimated from dropping production rate. Gross energy intake was converted to metabolizable energy intake using the assimilation as determined in digestion trials. The daily energy expenditure was estimated by the time-energy budget method. Energetic costs were determined using heart rate.

4. The daily gain of pondweed feeding at the median date of the habitat switch (i.e. when 50% of the swans had switched) was compared with that of beet feeding. The daily gain of beet feeding was calculated for two strategies depending on the night activity on the lake: additional pondweed feeding (mixed feeding) or sleeping (pure beet feeding).

5. The majority of the swans switched when the daily gain they could achieve by staying on the pondweed bed fell just below the average daily gain of pure beet feeders. However, mixed feeders would attain an average daily gain considerably above that of pondweed feeders. A sensitivity analysis showed that this result was robust.

6. We therefore reject the hypothesis that the habitat switch by swans can be explained by simple long-term energy rate maximization. State-dependency, predation risk, and protein requirements are put forward as explanations for the delay in habitat switch.