Measuring work-study engagement in built environment undergraduate education in Australia

The cost of accessing higher education is expensive causing students to juggle the demands of paid work with study responsibilities. Whilst some work can be beneficial to student leaning this research seeks a more accurate understanding of why students undertake paid experience work to the level that they do. This paper examines the extent of work and study during an undergraduate program in construction at RMIT University Australia. Students responded to a questionnaire on the duration and nature of their work and study times. The results indicate that students who were involved in paid work do in excess of 20 hours per week, whist also enrolled as full-time undergraduates. The results of the study show that students in the early years of the program seem to be more engaged with study and spent slightly less time at work. This is contrasted with students in the final two years of the course spend considerable more time in paid work and less time undertaking study.
The paper concludes by suggesting that the results are partly the result of the unstructured work-experience requirements that occur from about year 3 of the program. Students who were encouraged by the university to undertake paid work-experience appeared to be increasingly disinterested in connecting with the broader university experience.

Pathways to industry : work practices of undergraduate students in construction programs in Australia

This research reports the impact of work on undergraduate students enrolled in construction programs. Students responded to a questionnaire on the nature of their paid work while enrolled in full-time study in six universities across Australia. The results indicate that students are working on average 19 hours per week during semester time. The results indicate that students in the early years tend to undertake casual work that is not related to their degree. However, this pattern changes in the later years of the program, where students switch to roles in construction that does relate to their coursework. The students start working on average 16 hours in the first year of their degree, and the number rises to 24 hours in their final year. Past research suggests that students may be working to an extent beyond what is considered beneficial to their studies. Past research has shown that working long hours has a negative effect on the study patterns of undergraduate students. The implications of the amount of time working and the type of work are discussed. The paper concludes by suggesting that universities need a greater awareness of the impact of paid employment on student engagement.

Working collaboratively in a group assignment using a Mediawiki for an architecture and construction management undergraduate unit

This paper describes an architecture and construction management unit which implements Mediawiki in teaching and learning. The main objective of using the Mediawiki is to engage students to work collaboratively online in a group assignment. It also aims to further develop student information technology skills and thus enhance their learning experience. One of the learning objectives of the unit is to develop the ability to communicate the results of student research in construction technology using appropriate digital media from which Mediawiki was chosen. This paper outlines the challenges and issues faced in the implementation of Mediawiki as a collaborative tool in a group assignment of an architecture and construction management unit. It also discusses how academic staff and students were supported through the process of learning to use the Mediawiki. Finally, potential future directions of using Mediawiki in teaching and learning are explored based on students’ comments and feedback.

A longitudinal evaluation of a project-based learning initiative in an engineering undergraduate programme

Project-based learning (PBL) is a well-known student-centred methodology for engineering design education. The methodology claims to offer a number of educational benefits. This paper evaluates the student perceptions of the initial and second offering of a first-year design unit at Griffith University in Australia. It builds on an earlier evaluation conducted after the initial offering of the unit. It considers the implementation of the recommended changes. Evaluations of the two offerings reveal that students (in both the initial and second offering) generally enjoyed the experience, but that the second offering was found to be a significantly more enjoyable learning experience. Students in the second offering also reported a significantly better understanding of what they needed to do for the design projects and where to find the requisite information. The oral presentation aspect of the initial and second offerings received the lowest satisfaction rating. The inclusion (and delivery) of the computer-aided drawing component of the unit is seen as a positive aspect by some students, but many others comment on it negatively. The best aspects of the PBL unit and those aspects needing further improvement were similar to the findings of other investigations documented in the literature.

A comparative study of effectiveness of peer assessment of individuals’ contributions to group projects in undergraduate construction management core units

In recent years, various forms of group work have been introduced in university courses across various subject domains, including construction management courses. Although the use of group work in higher education has sound pedagogical reasons and advantages, group work has its own drawbacks. Therefore, the acceptance by students and the success of group work critically depend on a fair and credible assessment of the group process. In this paper, the implementation of different approaches to peer assessment (PA) of individuals’ contributions to group projects in two core units in an undergraduate construction management course in an Australian university is reported. The effectiveness of the adopted PA approaches have been evaluated and validated by students. It has been found that contrary to doubts of the sufficiency of a simplistic approach to PAs, the fairness of a PA approach does not necessarily depend on its complexity. Besides, voluntary group discussions, learning and collaboration are found to aid in improving each of the group’s camaraderie. Hence, it is recommended that academics should develop both a structured methodology to progressively encourage group members to work cohesively in teams and effective PA approaches that measure individual member’s contribution.

Assessment method difference : comparisons between international and domestic students within a first year undergraduate management course

This paper investigates the assessment methods and student results within a first year undergraduate management course offered within the business faculty of an Australian university. This course is compulsory for those studying for a commerce or management degree. The assessment results of full fee paying international students were compared with those of domestic students, during four teaching semesters in 2009 and 2010. Analysis compares 2,682 students’ numerical results for two constructed response assignments to their results for an examination comprising both multiple choice questions and constructed response questions. It also compares the results of international and domestic students across metropolitan, regional and rural campuses. However due to little comparison data for multiple campuses, findings are consolidated by domestic and international students, university-wide. International students were found to achieve lower results than domestic students for constructed response assessment tasks, but higher results than domestic students for multiple choice question assessments. These findings have implications for instructors eager to provide a level assessment playing field for both domestic and international students, enabling both groupings to take advantage of existing strengths but also to improve their weaknesses. This research led to a restructuring and rescheduling of assessment tasks for the 2012 academic year.

Work and study in construction education : practices of undergraduate students in Australia

Purpose of this paper The aim of this paper is to determine the amount of time construction management students spend engaged in paid work and study during semester time. Past research has shown that working long hours has a negative effect on the study patterns of undergraduate students.

Design/methodology/approach Students responded to a questionnaire on the nature of their paid work while enrolled in full-time study in a sample of universities across Australia.

Findings The results showed that students are working on average 18 hours per week during semester time. The results indicate that students in their first two years tend to undertake casual work that is not related to their degree. However, this pattern changes in the later two years of the course, where students switch to roles in construction that do relate to their coursework. The students start working on average 15 hours in the first year of their degree, and the time spent rises to 23 hours in their fourth year.

Practical implications Past research suggests that students may be working to an extent beyond what is considered beneficial to their studies. The implications of the amount of time working and the type of work are discussed.

Originality/value of paper The long-term impact of high levels of work and study on construction students are unknown. The paper concludes by suggesting that universities need a greater awareness of the impact of paid employment on engagement with their learning.

Real estate employability : differing perceptions of graduates from undergraduate and postgraduate courses

Purpose – Employability is likely to be at the forefront of any degree applicant's mind in England and Wales due to an impending large increase in the cost of tuition. The purpose of this paper is to report the findings of a Centre for Education in the Built Environment-funded project which has investigated real estate graduate competencies and employability. The paper concentrates on significant differences in emphasis by graduates from undergraduate (UG) and postgraduate (PG) courses.

Design/methodology/approach – Following an extensive literature review, 72 competencies have been identified and the Confederation of British Industry classification of knowledge, skills and attributes has been adopted. An online survey of 639 graduates (half UG and half PG) asked respondents to complete five-point Likert attitude scales to rate how their course enabled development of the 72 competencies. Themes developed from the results of the questionnaire study have been explored in greater detail with five real estate education providers and the human resource managers of four large London employers.

Findings – Rather surprisingly, UGs rated their gaining of the vast majority of the competencies more highly than PGs. This finding seems to be at odds with the impression given by the educators and employers, both of whom perceive a preference for the greater maturity and commercial awareness of graduates from PG courses.

Originality/value – Real estate course providers can use the results of this study to ensure that their programmes of study adequately address what is likely to become the crucial factor in the choice of any future programme of study – employability.

Managing patient deterioration : a protocol for enhancing undergraduate nursing students’ competence through web-based simulation and feedback techniques

Aims: To describe a funded proposal for the development of an on-line evidence based educational program for the management of deteriorating patients.
Background: There are international concerns regarding the management of deteriorating patients with issues around the ‘failure to rescue’. The primary response to these issues has been the development of medical emergency teams with little focus on the education of primary first responders.
Design/Methods: A mixed methods triangulated convergent design. In this four phase proposal we plan to 1. examine nursing student team ability to manage deteriorating patients and based upon these findings 2. develop web based educational material, including interactive scenarios. This educational material will be tested and refined in the third Phase 3, prior to evaluation and dissemination in the final phase.
Conclusion: This project aims to enhance knowledge development for the management of deteriorating patients through rigorous assessment of team performance and to produce a contemporary evidence-based online training program.

Physics practicals for distance education in an undergraduate engineering course

BACKGROUND : Providing engineering practicals to undergraduates by means of distance education is a significant challenge. The past 30 years have seen the rapid development of the distance education. For many years, Deakin University has offered a full Bachelor of Engineering degree programme via distance education. All first-year students study a unit in physics. This unit includes practicals. Providing practical experiences to students is distance education’s greatest challenge.

PURPOSE : The purpose of this work was to develop the means for off-campus students to complete practical exercises in first-year engineering physics. The solution to the problem also had to comply with accreditation requirements set by Engineers Australia.

METHOD : The long-term solution to the problem was running on-campus lab classes either on weekends or as part of the annual first-year residential school for engineering professional practice. Students work was assessed by means of standard laboratory reports. On-campus marks and off-campus lab marks have been collected and compared over the past 12 years.

RESULTS : The results indicate that the off-campus lab experience is similar to the on-campus experience. Marks for the two cohorts were comparable. Those few students who completed their pracs at home faced and overcame significant challenges.

CONCLUSIONS : We found that performance in their lab reports for off-campus students was similar to that of the on-campus students. Accreditation requirements has shifted the focus from developing activities that students could perform at home to offering timely and efficient on-campus lab classes for off-campus students. Future work will focus on on-campus lab classes in accordance with accreditation requirements and perhaps on-line broadcasts of prac classes for those students who cannot attend lab on-campus.

Concurrent undergraduate study and industry employment - the Australian experience

Undergraduate education in Quantity Surveying (QS) and Construction Management (CM) in Australia has traditionally incorporated concurrent industry experience as an important requisite prior to graduation. This has been primarily driven by accrediting professional associations but most universities have also recognized the value of this cooperative approach to education with industry. However, in recent years many universities have become concerned about the amount of time that students are spending in industry employment to the point where, for some students, their employment takes precedence over their academic studies. Past research has shown that working long hours has a negative effect on the study patterns of undergraduate students. This paper presents the results of research undertaken to examine the amount of time that Quantity Surveying and Construction Management students actually spend engaged in paid work during semester time and the impact on their studies. The methodology for the research was based on two separate questionnaire surveys distributed to undergraduate Quantity Surveying and Construction Management students at 7 universities across Australia. The questionnaires focused on the nature and extent of their paid work while enrolled in full-time study. The results indicate that students in the early stages of their program tend to undertake casual work that is not related to their degree but move to construction industry employment in the later stages of their program. The research found that students were spending an average of 18 hours per week in industry employment with this average increasing to over 23 hours in their final year. A number of students were spending well over 30 hours per week in industry employment. The implications of the extent of this concurrent industry employment are discussed.

Undergraduate electronics students' use of home experiment kits for distance education

Laboratory practicals form an essential component in any electronics or electrical engineering course. Many students choose to study engineering by means of distance education. Providing such students with effective and manageable practical experience has always been a significant challenge for those involved in providing distance education. Our university has employed an experimental electronics kit for teaching laboratory skills to distance-education students over the past several years. The chief limitation of the early kit was the inability to use it for performing AC experiments without an additional AC signal generator and an oscilloscope. We now supply distance-education students with the original components pack, and an additional “HELP” kit which contains the signal generator, PC-oscilloscope, a basic multimeter, logic probe, software and documentation. The combined kits allow these students to perform basic DC and AC electronics experiments at home in both freshman and sophomore electronics courses. A more recent development is introducing a small robot platform intended to enhance the student experience and interest in electronics and mechatronics, while still covering the basic skills necessary for the engineer-in-training. Distance-education students receive an updated experimental kit containing the robot, other equipment and components to allow them to complete a fuller suite of practical exercises in electronics in their first two years of study. Within this paper, we present these developments in our HELP kit and also make comparisons between on-campus and off-campus performance.