A novel method to investigate the polystyrene nanofiber formation during electrospinning process

In this study, the formation of polystyrene (PS) nanofibers during electrospinning process was investigated using a simple coagulation method. The fiber diameter, bead size and bead density of the PS nanofibers electrospun from the solutions with three different PS concentrations were studied. It revealed that the initial stage of electrospinning was responsible for fiber thinning, while the later stage is responsible for improving the fiber uniformity.

Composite yarns fabricated from continuous needleless electrospun nanofibers

In this work, a spinning metal wire collector was employed to continuously collect polyacrylonitrile (PAN) nanofibers produced by a disc fiber generator and coil them around a polyethylene terephthalate (PET) yarn. The obtained composite yarns exhibited a core/shell structure (PET yarn/PAN nanofibers) with nanofibers orderly arranged on the surface of the PET yarn. The electric field analysis showed that the position of metal wire had insignificant effect on the formed electric field and high intensity electric field was formed at the disc circumferential area, which provided a constant electric field for the production of uniform nanofibers. The spinning solution, spinning speed of metal wire, and winding speed were found to play an important role in producing good quality nanofiber yarns, in terms of morphology, strength, and productivity. Pure nanofiber yarns were obtained after dissolving the core yarns in a proper solvent. This method has shown potential for the mass production of nanofiber yarns for industrial applications.

Polyacrylonitrile nanofibre yarn; electrospinning and their post-drawing behaviour

Polyacrylontrile nanofibre yarns have been successfully produced from an electrospinning setup composing positively and negatively charged spinnerets, a rotating funnel and a yarn winder. Through hot drawing, yarns show compact morphology and improved uniformity and have a significant decrease in both yarn and fibre diameters. The hot drawing has improved the molecular orientation and crystallinity of the fibres. The yarn drawn to 5 times of its original length has been found to have the highest tensile strength and modulus.

Ultrafine PDMS fibers: Preparation from in situ curing-electrospinning and mechanical characterization

Polydimethylsiloxane (PDMS) fibers with unexpected elasticity were prepared by a modified core-shell electrospinning method using a commercially-available liquid PDMS precursor (Sylgard 184) and polyvinylpyrrolidone (PVP) as core and sheath materials, respectively. The liquid PDMS precursor was crosslinked in situ to form a solid core when the newly-electrospun core-sheath nanofibers were deposited onto a hot-plate electrode collector. After dissolving the PVP sheath layer off the fibers, net PDMS fibers showed larger average diameter than core-sheath fibers, with an average diameter around 1.35 μm. The tensile properties of both single fibers and fibrous mats were measured. Single PDMS fibers had a tensile strength and elongation at break of 6.0 MPa and 212%, respectively, which were higher than those of PDMS cast film (4.9 MPa, 93%). The PDMS fiber mat had larger elongation at break than the single PDMS fibers, which can be drawn up to 403% their original length. Cyclic loading tests indicated a Mullin effect on the PDMS fiber mats. Such a superior elastic feature was attributed to the PDMS molecular orientation within fibers and the randomly-orientated fibrous structure. Highly-elastic, ultrafine PDMS fibers may find applications in strain sensors, biomedical engineering, wound healing, filtration, catalysis, and functional textiles. © The Royal Society of Chemistry 2014.

Recent developments in electrospinning of nanofiber yarns

Nanofibers possess high surface area and excellent porosity. Though nanofibers can be produced by a variety of techniques, electrospinning stands distinct because of its simplicity and flexibility in processing different polymer materials, and ability to control fiber diameter, morphology, orientation, and chemical component. Nonetheless, electrospun nanofibers are predominantly produced in the form of randomly oriented fiber webs, which restrict their wide use. Converting nanofibers into twisted continuous bundles, i.e., nanofiber yarns, can improve their strength and facilitate their subsequent processes, but remains challenging to make. Nanofiber yarns also create enormous opportunities to develop well-defined three-dimensional nanofibrous architectures. This review article gives an overview of the state-of-the-art techniques for electrospinning of nanofiber yarns and control of nanofiber alignment. A detailed account on techniques to produce twisted/non-twisted short bundles and continuous yarns are discussed.

Direct electrospinning of nanofibre yarns using a rotating ring collector

Nanofibres prepared by electrospinning typically have randomly oriented fibrous structure. They have large surface-to-volume (or weight) ratio and excellent porous characteristic, which have shown enormous potential in diverse applications. However, electrospun nanofibres are often prepared in the form of randomly orientated fibrous web, which are fragile and difficult to be tailored in fibrous structures. Herein, we demonstrate a novel yarn electrospinning method which uses a rotating ring collector to convert newly electrospun nanofibres directly into a continuous yarn. The use of ring collector separates the yarn formation from the electrospinning zone. The deposition of later-spun nanofibres to the inner surface of fibrous cone eliminates hooked or curled nanofibres in the final yarn. The effects of polymer concentration and operating parameters on nanofibre and yarn morphology, diameter and the ring collector on yarn twist feature were examined. The nanofibre yarns had a surface twist angle up to 54.4°, and tensile strength as high as 93.6 MPa (elongation at break 242.6%). Increasing twist levels improves tensile strength and strain values.

Effect of electrospinning parameters and polymer concentrations on mechanical-to-electrical energy conversion of randomly-oriented electrospun poly(vinylidene fluoride) nanofiber mats

Poly(vinylidene fluoride) (PVDF) nanofiber mats prepared by an electrospinning technique were used as an active layer for making mechanical-to-electric energy conversion devices. The effects of PVDF concentration and electrospinning parameters (e.g. applied voltage, spinning distance), as well as nanofiber mat thickness on the fiber diameter, PVDF β crystal phase content, and mechanical-to-electrical energy conversion properties of the electrospun PVDF nanofiber mats were examined. It was interesting to find that finer uniform PVDF fibers showed higher β crystal phase content and hence, the energy harvesting devices had higher electrical outputs, regardless of changing the electrospinning parameters and PVDF concentration. The voltage output always changed in the same trend to the change of current output whatever the change trend was caused by the operating parameters or polymer concentration. Both voltage and current output changes followed a similar trend to the change of the β crystal phase content in the nanofibers. The nanofiber mat thickness influenced the device electrical output, and the maximum output was found on the 70 μm thick nanofiber mat. These results suggest that uniform PVDF nanofibers with smaller diameters and high β crystal phase content facilitate mechanical-to-electric energy conversion. The understanding obtained from this study may benefit the development of novel piezoelectric nanofibrous materials and devices for various energy uses.

Rapid and sensitive ethanol sensor based on hollow Au/V2O5 nanotubes via emulsion-electrospinning route

Hollow electrospun V2O5 and Au/V2O5 nanotubes have been successfully synthesized by combining emulsion electrospinning (EE) and post calcination treatment. Immiscible polyvinyl pyrrolidone (PVP)/metal salts/dimethylformamide (DMF) solution and polystyrene (PS)/DMF solution are chosen for the EE to form PS PVP/metal salts) core-sheath nanofibers, in which PS nanorods were formed and encapsulated within in the PVP/metal salts nanofibers owing to the stretching forces and de-emulsified force during the electrospinning. Excellent sensitivity and rapid response-recovery behaviors against ethanol have been successfully achieved based on our hollow ceramic (V2O5 and Au/V2O5) nanotubes.

Enhancement of ion dynamics in organic ionic plastic crystal/PVDF composite electrolytes prepared by co-electrospinning

Electrospun fibers are widely used in composite material design and fabrication due to their high aspect ratio, high surface area and favorable mechanical properties. In this report, novel organic ionic plastic crystal (OIPC) modified poly(vinylidene difluoride) (PVDF) composite fiber membranes were prepared by electrospinning. These composite materials are of interest for application as solid electrolytes in devices including lithium and sodium batteries. The influence of the OIPC, N-ethyl-N-methylpyrrolidinium tetrafluoroborate [C2mpyr][BF4], on the morphology and phase behavior of the composite fibers was investigated by scanning electron microscopy and Fourier transform infrared spectroscopy. Compared with pure electrospun PVDF fibers, which have an electroactive β phase and a small amount of non-polar α phase, the ion-dipole interaction between OIPC and the polymer in the co-electrospun composite system can reduce the non-polar α phase PVDF, resulting in almost entirely electroactive β phase PVDF. Differential scanning calorimetry shows that the ion-dipole interaction between the OIPC and PVDF can also interrupt the crystalline structure of the OIPC. Solid state NMR analysis also reveals different molecular dynamics of the [C2mpyr][BF4] in co-electrospun fibers compared with pure OIPC. Thus, electrospun [C2mpyr][BF4]/PVDF composite fibers that combine both increased ionic conductivity and almost pure β phase PVDF are demonstrated.

Effects of polymer concentration and cationic surfactant on the morphology of electrospun polyacrylonitrile nanofibres

PAN nanofibres were prepared via an electrospinning process. The effect of polymer concentration on the fibre morphology was studied. At a very dilute solution, no fibres were obtained in the electrospinning process. As the concentration increased, the fibre morphology evolved from a beads-on-string structure to a uniform fibre structure with increasing fibre diameters. However, when the same electrospinning process was conducted with the addition of a cationic surfactant, the formation of disconnected beads was prevented, and the number of beads-on-string structures reduced significantly. In addition, the presence of cationic surfactant reduced the average diameter of the electrospun PAN nanofibres.

Self-crimping bicomponent nanofibres electrospun from polyacrylonitrile and elastomeric polyurethane

Two polymer solutions were brought together via a microfluidic device and subjected to an electrospinning process. The two polymer solutions flowed into the microfluidic channel side-by-side with very little intermixing due to their laminar nature. High speed stretching of the polymer solutions resulted in side-by-side bicomponent fibres. The electrospun nanofibres exhibited an extremely high propensity to self-crimp when an elastomeric polymer (polyurethane) and a normal polymer (polyacrylonitrile PAN) were involved in the electrospinning process. The formation of self-crimping fibre morphology was attributed to the differential shrinkage of the two polymers.