Photo-catalysis of red wine stains using titanium dioxide sol-gel coatings on wool fabrics

This paper investigated the use of titanium dioxide sol-gel coatings to photo-catalyse red wine stains on wool fabrics. Coatings were produced by the hydrolysis and condensation of titanium butoxide (Ti(OC4H9)4) on the surface of wool fabrics after pad application. Coatings were partially converted to the anatase form of titanium dioxide by prolonged immersion in boiling water. The coating presence was confirmed using scanning electron microscopy, UVspectrophotometry and atomic force microscopy. Coated samples were measured for photo-catalytic activity by degrading red wine stains from the surface of the coated fabric. The level of photocatalysis was determined for each of the coating systems after 168 hours. Red wine stains were photo-catalysed and level of staining was reduced from the UV exposed surface of the coated wool fabric.

Photochromic wool fabrics with enhanced durability and photochromic performance

In our previous work, we have produced a photochromic wool fabric by applying a thin layer of hybrid silica-photochromic dye onto the wool surface. The coating showed a very fast optical response, but had little influence on the fabric handle, however durability was low. In this context, we reported that durability of the hybrid layer can be improved by introducing epoxy groups into the silica matrix via co-hydrolysis and co-condensation of an alkyl trialkoxysilane (ATAS) and 3-glycidoxypropyltrimethoxysilane (GPTMS). The presence of epoxy groups in the silica enhanced both washing and abrasion durabilities. Also, the optical response speed was slightly increased as well. Effects of the type of alkyl silane and the GPTMS:alkyl silane ratio on the coating durability, fabric handle and optical response were examined.

A comparative study on accelerated weathering tests of wool fabrics

This work has used two lightboxes with Philips 500 W MBTF lamps for a comparative trial on the photoyellowing evaluation of untreated wool fabrics under dry and wet conditions. An investigation was made to account for different trends of photoyellowing of the same wool fabric when irradiated by the two lightboxes. The fabric specimens irradiated in one lamp experienced increasing yellowing with irradiation time while specimens from the same wool fabric but irradiated under the other lamp manifested no noticeable color change. These differences are attributed to the susceptibility of wool to small spectral differences between the two MBTF lamps. Furthermore, the color fading results obtained from the commonly used blue wool standard (BWS) references from L1 to L3 show that these reference materials could not effectively reveal changes caused by the spectral differences in two MBTF lamps. These results have important implications for conducting accelerated weathering tests on spectrum-sensitive textile materials, and considerable care should be taken when using BWSs to ensure reliable and consistent irradiation results.

Characterization of hot-pressed films from superfine wool powder

In this study, superfine wool powder was plasticized with glycerol and hot-pressed into a film. Scanning electron microscopy photos showed that the superfine wool powder could be molded into a smooth film and that the wool powder was distributed evenly in the cross section of the film. Fourier transform infrared analysis revealed no substantial changes in the chemical structure of the wool powder after hot pressing, but the absorbing peaks of glycerol were found in the spectrum. X-ray diffraction analysis showed that the overall crystallinity increased after the wool powder was hot-pressed into film. Thermogravimetry (TG) analysis indicated that the thermal stability of the hot-pressed film decreased. A transition point appeared in the TG curve of the wool hot-pressed film as glycerol was added. The differential thermal analysis curve of the film showed sharp absorbing peaks similar to that of wool powder. With increasing glycerol content, the film showed increasing ductility and softness.

One-bath union dyeing of wool/polytrimethylene terephthalate blends

The one-bath dyeing of blends of polytrimethylene terephthalate (PTT) staple and wool has been investigated. The exhaustion of selected Terasil disperse dyes on PTT fibre and Lanasol reactive dyes on wool was measured as a function of temperature, together with the cross-staining of the Terasil dyes on the wool component and the Lanasol dyes on PTT component. Most Terasil disperse dyes achieved satisfactory dye uptake on PTT at 110 °C, whereas on conventional polyester (polyethylene terephthalate) temperatures of up to 130 °C are required. An optimised union-dyeing technique for wool/PTT blends was developed which minimised the staining of Terasil disperse dyes on wool and produced dyed goods with high levels of wet colour fastness. Carriers were not required to enhance the dyeability of PTT at low temperatures. The wool component appeared to be protected against damage at 110 °C by the reactive dyes. The results indicate the potential for blending PTT fibre and wool to produce fabrics that are easier to dye at lower temperatures than conventional wool/polyester blends.

The dimensional and mechanical properties of wool/polyester fabrics made from vortex and ring-spun yarns

Fabric woven from wool/polyester (PES) Murata vortex spun (MVS) blend yarn is a commercially viable proposition particularly on the basis of advantageous wear-resistant properties, compared with fabric made from traditional worsted ring-spun yarn. However, in some early industrial trials with fabric made from 45/55-blend wool/PES MVS yarn, significantly greater relaxation shrinkage was found relative to comparable worsted ring-spun fabric. It was noted at the time that the amount of relaxation shrinkage in MVS fabric could be reduced to a large extent by using steamed MVS yarn.

In this study, the extent of variations in the dimensional and mechanical properties of fabric samples woven from a combination of steamed and unsteamed MVS yarn and equivalent worsted ring-spun yarn is examined. In general, greater hygral expansion and relaxation shrinkage were found in loom-state fabrics made from unsteamed MVS yarns, whereas the fabric made from steamed MVS and ring-spun yarns gave relatively low levels of relaxation shrinkage and hygral expansion. Permanent setting of fabrics, by pressure steaming, was found to be more effective than yarn pre-steaming in reducing relaxation shrinkage levels of fabrics made from unsteamed MVS yarn. After pressure steaming, all fabrics showed similar levels of relaxation shrinkage and hygral expansion.

Permanent setting of the fabrics, by pressure steaming, resulted in similar levels of relaxation shrinkage and hygral expansion, irrespective of the yarn production method; relaxation shrinkage fell to around 1% and hygral expansion increased by about 1%, relative to the loom-state samples. MVS fabrics were relatively heavier and fuller and had a firmer handle than the worsted ring-spun fabrics, reflecting the greater fabric weight, thickness and shear rigidity measured on these fabrics. These attributes are associated with different structures of the worsted ring-spun and MVS yarns used to make the fabrics.

Bleaching and dyeing of superfine wool powder/polypropylene blend film

Fibers based regenerated protein draw much attention for recycling discarded protein resources and can produce biodegradable and environmental friendly polymers. In this study, superfine wool powder is blended with polypropylene (PP) to produce wool powder/PP blend film through extrusion and hot-pressing. Hydrogen peroxide is used to bleach the black colored surface of the blend films. The effects of peroxide concentration, bleaching time and powder content on the final whiteness and mechanical properties of the blend films are investigated.

The bleached films are dyed with acid red dyes and the dyed color is evaluated using a Computer Color Matching System. Color characters of dyed films, such as L*, a*, b*, ΔE*ab, C*ab and K/S values are measured and analyzed. The study not only reuses discarded wool resources into organic powder, widens the application of superfine wool powder on polymers, but also improves the dyeing properties of PP through the addition of protein content.

Tensile behaviour of wool fabric as a function of fabric pH

Wool fabric extensibility under a 5 N/cm load was observed to be greatest at the wool isoelectric point of pH 4.8 and lower at both pH 2.1 and pH 7.2. The impact of pH on fabric extensibility is similar to the variation in fabric hygral expansion previously observed. Fabric stress-strain curves at different pHs show that for a given fabric extension level, the work required to stretch a fabric was less at pH 2.1 than at pH 4.8. These results confirm the fact that the strength of wool fabric is at a maximum when the pH of the fibres is close to the isoelectric point.

Photochromic coloration of wool fabric

A method has been developed for producing photochromic wool fabric by applying a layer of hybrid silica containing a photochromic dye onto wool fibres. A number of different hybrid silicas were prepared by the sol-gel technique involving co-hydrolysis and co-condensation of alkyltrialkoxysilanes together with 3-glycidoxypropyltrimethoxysilane. With the dye Photorome II, it was possible to obtain a photo chromic coating which showed fast optical response. The coating had only a slight effect on the fabric handle. The durability of the coating appeared to be acceptable, at least for fashion wear.

Identification of cashmere and superfine merino wool with wavelet texture analysis

This paper presents the use of the wavelet transform to extract fibre surface texture features for classifying cashmere and superfine merino wool fibres. To extract features from brightness variations caused by the cuticular scale height, shape and interval provides an effective way for characterising different animal fibres and subsequently classifying them. This may enable the development of a completely automated and objective system for animal fibre
identification.

An artificial neural network-based hairiness prediction model for worsted wool yarns

This study evaluated the performance of multilayer perceptron (MLP) and multivariate linear regression (MLR) models for predicting the hairiness of worsted-spun wool yarns from various top, yarn and processing parameters. The results indicated that the MLP model predicted yarn hairiness more accurately than the MLR model, and should have wide mill specific applications. On the basis of sensitivity analysis, the factors that affected yarn hairiness significantly included yarn twist, ring size, average fiber length (hauteur), fiber diameter and yarn count, with twist having the greatest impact on yarn hairiness.

The limiting irregularity of single wool fibers

Fiber irregularity affects fiber mechanical properties. This study has, for the first time, introduced the concept of limiting irregularity to single wool fibers. The limiting irregularity is the minimum variation in fiber cross sectional area that can be expected of a single wool fiber, assuming a random length-wise distribution of its constituent cortical cells. Cortical cells were extracted from merino wool fibers and their dimensions were measured from SEM images to calculate their cross sectional area variations both between cortical cells and within cortical cells, and to work out the average number of cortical cells in the cross section of wool fibers of a given diameter. Single wool fibers were also measured at 5 µm interval along length for fiber diameter variations. These variations were found to be larger than that based on fiber limiting irregularity.