Pathways to industry : work practices of undergraduate students in construction programs in Australia

This research reports the impact of work on undergraduate students enrolled in construction programs. Students responded to a questionnaire on the nature of their paid work while enrolled in full-time study in six universities across Australia. The results indicate that students are working on average 19 hours per week during semester time. The results indicate that students in the early years tend to undertake casual work that is not related to their degree. However, this pattern changes in the later years of the program, where students switch to roles in construction that does relate to their coursework. The students start working on average 16 hours in the first year of their degree, and the number rises to 24 hours in their final year. Past research suggests that students may be working to an extent beyond what is considered beneficial to their studies. Past research has shown that working long hours has a negative effect on the study patterns of undergraduate students. The implications of the amount of time working and the type of work are discussed. The paper concludes by suggesting that universities need a greater awareness of the impact of paid employment on student engagement.

Watching me, watching you

The planned introduction of quality checks by the Go8 on final-year students is a welcome move. Hopefully it will be taken up more broadly in the sector under the influence of the new Tertiary Education Quality and Standards Agency.

Not one of us is without bias : identifying and challenging racism and homophobia

This article reviews a teaching process that aimed to prepare final year social work students for critical practice with diverse and marginalized populations. Alongside lecture input, in small group discussions and in the two sequenced written assignments students were encouraged to personalize questions of bias and stigma by recalling both their experiences of being “other-ed” as well as their participation in practices that “other-ed”, such as racist and homophobic imaging and acting. Feedback to the unit’s first iteration in 2004 was generally positive yet a significant minority of students were clearly dissatisfied. Whilst retaining the same formal content in 2005, greater attention was devoted to generating a supportive group process and a positive environment for “negative” self-disclosure. This milieu acted to contain and normalize the students’ struggle with internalized stereotypes, a stage associated with their greater preparedness to identify and challenge their own personal, cultural and ideological locations. Within the context of the unit remaining explicit about its value stance, by adopting an approach to the teaching / learning process that neither collided nor colluded, as teachers we believe the 2005 revision better achieved the units aims. First, the unit received broader positive appraisal from students and, second, it appeared that the unit more firmly promoted the prospects for students carrying forward a capacity for critical self review post graduation.

Who, and what, is odd here? De-naturalizing students' experiences of 'the other'

This paper reviews a teaching process that aimed to prepare final year social work students for critical practice with diverse and marginalized populations. Alongside lecture input, in small group discussions and in the two sequenced written assignments students were encouraged to personalize questions of bias and stigma by recalling both their experiences of being ‘other-ed’ as well as their participation in practices that ‘other-ed’, such as racist and homophobic imaging and acting. Feedback to the unit's first iteration in 2004 was generally positive yet a significant minority of students were clearly dissatisfied. Whilst retaining the same formal content in 2005, greater attention was devoted to generating a supportive group process and a positive environment for ‘negative’ self-disclosure. This milieu acted to contain and normalize the students' struggle with internalized stereotypes, a stage associated with their greater preparedness to identify and challenge their own personal, cultural and ideological locations. Within the context of the unit remaining explicit about its value stance, by adopting an approach to the teaching/learning process that neither collided nor colluded we believe the 2005 revision better achieved the units aims. First, the unit received broader positive appraisal from students and, second, it appeared that the unit more firmly promoted the prospects for students carrying forward a capacity for critical self review post graduation.

Inside higher education

This section of the proceedings report provides details of the issues discussed in the theme Inside Higher Education. This theme explored the experience of university from the inside for students and staff, including pedagogy, the first year experience, orientation programs and curriculum. Much ground was covered by both the equity practitioners and the academics who contributed. However, several common issues emerged across the sessions. Inevitably not everything covered in this theme can be reported, but what follows is a synthesis of the main issues and the presenters who raised them.

Anthropometric profiling of elite junior and senior Australian football players

Purpose: Body structure and physical development must be addressed when preparing junior athletes for their first season in a senior competition. The aim of this preliminary study was to measure the extent of the assumption that final year junior Australian Football (AF) athletes are at a physical mismatch to their senior counterparts.

Methods: Twenty-one male participants (17.71 ± 0.27 y) were recruited from one state based elite junior AF competition and forty-one male participants (22.80 ± 4.24 y) were recruited from one club competing in the senior elite Australian Football League (AFL), who were subsequently divided into two groups; professional rookies aged 18-20 y (19.44 ± 0.70 y; n = 18) and professional seniors aged 21+ y (25.43 ± 3.98 y; n = 23). Dual energy X-ray absorptiometry (DEXA) scans of all participants were completed.

Results: Despite being an average 6.0% and 6.1% lighter in total weight and lean mass respectively, no significant difference was found between the elite junior athletes and their professional AFL rookie counterparts. However, significant differences were demonstrated in comparison with the professional AFL senior athletes (P < .01). Both professional AFL groups demonstrated greater than 0.3 kg total bone mineral content (BMC) than the elite junior athletes (P < .01) and significantly greater segmental BMC and bone mineral density (BMD) results (P < .05).

Conclusion: While the results identify the differences in body composition of the elite junior athletes, development in a linear fashion is noted, providing useful information for the creation of age appropriate expectations and training programs.

Interconnectedness, multiplexity and the global student : the role of blogging and micro blogging in opening students horizons

The authors explore the world of blogging and micro blogging (twitter) as a means of mediating engagement with students, lawyers, academics and other interested and interesting people around the world. Through the use of auto-ethnographic case studies of their own experiences with blogging and micro blogging tools, the authors propose that far from being a distraction from student learning, these tools have the potential to open up an international professional collaborative space beyond the physical classroom, for both academics and our students, from their first year experience through to practical legal training and continuing professional development.

The process of design based learning : a students' perspective

BACKGROUND : Deakin engineering has used Design Based Learning (DBL) as one of its engineering learning principles for further development in teaching and learning. Whilst the students are surveyed after every unit, this data only provides a generic overview of the process and does not help the academic staff determine if DBL is a preferable learning and teaching approach. What is required to improve the process is a holistic approach from the students’ perspective over the entire degree program.

PURPOSE : Do students see any value in DBL and should it be is further developed for teaching and learning? This study examines students’ perceptions of DBL in their curriculum, DBL in final year project, DBL in engineering career.

DESIGN/METHOD : A survey dedicated to DBL from the students’ point of view has been designed and given to 30 fulltime students in 3rd year in engineering at Deakin. A qualitative and quantitative analysis of this survey will give students’ perspective of DBL as they progress through their degree studies.

RESULTS : The full time students’ surveyed indicated that they believed that DBL was a useful tool and was of value to their career. Also that it would be helpful as part of their final project and that it helps teamwork although they would like to see it used for both team and individual work.

CONCLUSIONS : The full time students’ surveyed displayed a basic understanding of DBL and an eagerness to use it. Students’ perceived that DBL approach got an important value in their learning curriculum and it is a positive sign for the Deakin engineering to use it as one of its engineering learning principle.

Undergraduate nursing students' performance in recognising and responding to sudden patient deterioration in high psychological fidelity simulated environments: an Australian multi-centre study

Objectives
This paper reports the quantitative findings of the first phase of a larger program of ongoing research: Feedback Incorporating Review and Simulation Techniques to Act on Clinical Trends (FIRST2ACTTM). It specifically aims to identify the characteristics that may predict primary outcome measures of clinical performance, teamwork and situation awareness in the management of deteriorating patients.

Design
Mixed-method multi-centre study.

Setting
High fidelity simulated acute clinical environment in three Australian universities.

Participants
A convenience sample of 97 final year nursing students enrolled in an undergraduate Bachelor of Nursing or combined Bachelor of Nursing degree were included in the study.

Method
In groups of three, participants proceeded through three phases: (i) pre-briefing and completion of a multi-choice question test, (ii) three video-recorded simulated clinical scenarios where actors substituted real patients with deteriorating conditions, and (iii) post-scenario debriefing. Clinical performance, teamwork and situation awareness were evaluated, using a validated standard checklist (OSCE), Team Emergency Assessment Measure (TEAM) score sheet and Situation Awareness Global Assessment Technique (SAGAT). A Modified Angoff technique was used to establish cut points for clinical performance.

Results
Student teams engaged in 97 simulation experiences across the three scenarios and achieved a level of clinical performance consistent with the experts' identified pass level point in only 9 (1%) of the simulation experiences. Knowledge was significantly associated with overall teamwork (p = .034), overall situation awareness (p = .05) and clinical performance in two of the three scenarios (p = .032 cardiac and p = .006 shock). Situation awareness scores of scenario team leaders were low overall, with an average total score of 41%.

Conclusions
Final year undergraduate nursing students may have difficulty recognising and responding appropriately to patient deterioration. Improving pre-requisite knowledge, rehearsal of first response and team management strategies need to be a key component of undergraduate nursing students' education and ought to specifically address clinical performance, teamwork and situation awareness.

Australian primary pre-service teachers’ conceptions of geography

This article reports on the results of a survey of Australian primary pre-service teachers’ experiences, conceptions and perceptions of geography. Research was conducted with two cohorts of undergraduate primary pre-service teachers; one group in second year and another in the final year of a four-year teacher education course. The findings show congruence with similar studies conducted in the UK and indicate that pre-service teachers had a very narrow conception of geography and geography education; a conception that was information-oriented and focused on broad knowledge about the world and locational knowledge and skills. The article concludes by exploring some of the implications for the implementation of the new national geography curriculum in Australia and for primary pre-service geography teacher education more broadly.

An evaluation of the impact of using authentic design and build industry projects in project-based learning

BACKGROUNDChisholm’s ‘first year experience’ is a significant feature of the new industry focused Bachelor of Engineering Technology program delivered in association with the South East Melbourne Manufacturers’ Alliance (SEMMA). This conceive-design-implement-operate (CDIO Initiative) program commenced as a full time program in first semester 2012. Whereas it is common for CDIO Initiative programs to have a first year experience program containing a project typical of the type of industry project they would complete as a graduate engineer or engineering technologist, this goes further by using real industry projects provided by SEMMA members.This design-and-build industry project runs across both semesters supporting project-based learning in three first year subjects. A concern is that the industry involvement of the projects adds substantially to an already heavy student workload. This has been further increased by the addition of two additional first year initiatives: writing workshops, and training in, and substantial use of, student oral presentations. It is recognised that an excessive workload could lead students to adopt surface learning approaches in other subjects.PURPOSEThe goal of the project is to evaluate student perceptions of the value and work load impact of the industry project and the other new first year initiatives.DESIGN/METHODCentral to this project is a student survey-based evaluation of the industry project based learning that is the core of the ‘first year experience’. The participants were limited to the small group of students who, in a single year, completed all three subjects that comprise the ‘first year experience’. To avoid compromising the results the survey was administered by Chisholm Institute’s Department of Strategy and Planning with no engineering technology degree program staff present. The survey included questions to enable responses to be linked with specific student demographics without identifying any of the respondents.RESULTSThe study showed the industry project-based learning had worthwhile outcomes but placed considerable time pressures on most respondents. For some, this also impacted on their other subjects. A first year oral presentation program was also shown to have worthwhile outcomes. However no conclusions could be reliably drawn on the third initiative – writing workshops.CONCLUSIONSThe results confirm that the authentic industry project is considered a worthwhile initiative but contributes significantly to student overload. This applies also – to a lesser extent – to the first year oral presentation program. Both also require new approaches to delivery as student numbers increase. Strategies to address these issues are discussed.

Portfolio careers for medical graduates: implications for postgraduate training and workforce planning.

Portfolio careers in medicine can be defined as significant involvement in one or more portfolios of activity beyond a practitioner's primary clinical role, either concurrently or in sequence. Portfolio occupations may include medical education, research, administration, legal medicine, the arts, engineering, business and consulting, leadership, politics and entrepreneurship. Despite significant interest among junior doctors, portfolios are poorly integrated with prevocational and speciality training programs in Australia. The present paper seeks to explore this issue. More formal systems for portfolio careers in Australia have the potential to increase job satisfaction, flexibility and retention, as well as diversify trainee skill sets. Although there are numerous benefits from involvement in portfolio careers, there are also risks to the trainee, employing health service and workforce modelling. Formalising pathways to portfolio careers relies on assessing stakeholder interest, enhancing flexibility in training programs, developing support programs, mentorship and coaching schemes and improving support structures in health services.

Studying mathematics teacher education: analysing the process of task variation on learning

Self-study of variations to task design offers a way of analysing how learning takes place. Over several years, variations were made to improve an assessment task completed by final-year teacher candidates in a primary mathematics teacher education subject. This article describes how alterations to a task informed on-going developments in self-study of one assessment task employed in an online subject. Analysis of my journal, notes from conversations with colleagues, teacher candidates’ work on the task and responses to online forums, and survey data inspired variations focused on better exploration of key concepts involved in the task, raising of focal awareness, developing a stronger professional eye in the students and the author, adaptations for multiple curriculum levels, and explorations of dual teacher–student perspectives. The overall challenge has been to support teacher candidates to learn to design effective open-ended tasks with a critical professional eye. Descriptions of the changes made to the task and the development of my own professional eye as a consequence of the application of self-study are included. Data show that variations to the task increased teacher candidates’ understanding of mathematics problem posing and generated pedagogical insights for task design.

Transformation from student to occupational therapist : using the Delphi technique to identify the threshold concepts of occupational therapy

BACKGROUND/AIM: Understanding and facilitating the transformation from occupational therapy student to practitioner is central to the development of competent and work-ready graduates. However, the pivotal concepts and capabilities that need to be taught and learnt in occupational therapy are not necessarily explicit. The threshold concepts theory of teaching and learning proposes that every discipline has a set of transformational concepts that students must acquire in order to progress. As students acquire the threshold concepts, they develop a transformed way of understanding content related to their course of study which contributes to their developing expertise. The aim of this study was to identify the threshold concepts of occupational therapy. METHOD: The Delphi technique, a data collection method that aims to demonstrate consensus in relation to important questions, was used with three groups comprising final year occupational therapy students (n = 11), occupational therapy clinicians (n = 21) and academics teaching occupational therapy (n = 10) in Victoria, Australia. RESULTS: Participants reached consensus regarding 10 threshold concepts for the occupational therapy discipline. These are: understanding and applying the models and theories of occupational therapy; occupation; evidence-based practice; clinical reasoning; discipline specific skills and knowledge; practising in context; a client-centred approach; the occupational therapist role; reflective practice and; a holistic approach. CONCLUSION: The threshold concepts identified provide valuable information for the discipline. They can potentially inform the development of competencies for occupational therapy and provide guidance for teaching and learning activities to facilitate the transformation to competent practitioner.

A comparison of different study load classifications and their association to student performance: an exploratory study

Purpose – The purpose of this paper is to investigate the alternative study load measures (dichotomous full-time/part-time classification and the number of units enrolled) and their association to student performance by using student data from a final year accounting unit in a large Australian university.

Design/methodology/approach – Using regression analysis, the authors compare the two measures to ascertain the explanatory power of the two approaches in explaining student performance.

Findings – A positive association is found between study loads and student performance when using the “number of units enrolled” measure. This relationship was not found when the dichotomous measure (full-time vs part-time) was used. The results suggest that a scaled measure of study loads is a better measure compared to a binary (dichotomous) measure.

Research limitations/implications – The study will assist future researchers to better control for study loads, and also to gain a better understanding of the association between study loads and student performance. This may possibly assist educational institutions and academics to use a more appropriate pedagogical design in the structure of courses when determining study load allocations across the different cohorts.

Practical implications – This study will help in methodology of future researchers controlling for study loads and student performance.
Originality/value – The study adds to existing literature by providing an alternate study load measure in methodology for controlling for student performance.