The crossroads approach to information discovery in wireless sensor networks

Wireless sensor networks (WSN) are attractive for information gathering in large-scale data rich environments. In order to fully exploit the data gathering and dissemination capabilities of these networks, energy-efficient and scalable solutions for data storage and information discovery are essential. In this paper, we formulate the information discovery problem as a load-balancing problem, with the combined aim being to maximize network lifetime and minimize query processing delay resulting in QoS improvements. We propose a novel information storage and distribution mechanism that takes into account the residual energy levels in individual sensors. Further, we propose a hybrid push-pull strategy that enables fast response to information discovery queries.

Simulations results prove the proposed method(s) of information discovery offer significant QoS benefits for global as well as individual queries in comparison to previous approaches.

Dynamic route construction for mobile collectors in wireless sensor networks

Wireless sensor networks with mobile data collectors have been recently proposed for extending the sensor network lifetime. Powerful mobile collectors are deployed to patrol the network and approach the static sensors for collecting their data buffers using single hop communication. The route followed by the mobile collector is very crucial for the data collection operation performed in the network and highly impacts the data collection time. This paper presents a practically efficient algorithm for constructing the mobile collector route. The route is constructed dynamically during the network operational time regardless of the sensors data generation rates. The algorithm acts on minimizing the sleeping time and the number of sensors waiting for the arrival of the mobile collector. Simulation results demonstrate that the presented algorithm can effectively reduce the overall data collection time.

A practical framework for data collection in wireless sensor networks

Optimizing energy consumption for extending the lifetime in wireless sensor networks is of dominant importance. Groups of autonomous robots and unmanned aerial vehicles (UAVs) acting as mobile data collectors are utilized to minimize the energy expenditure of the sensor nodes by approaching the sensors and collecting their buffers via single hop communication, rather than using multihop routing to forward the buffers to the base station. This paper models the sensor network and the mobile collectors as a system-of-systems, and defines all levels and types of interactions. A practical framework that facilitates deploying heterogeneous mobiles without prior knowledge about the sensor network is presented. Realizing the framework is done through simulation experiments and tested against several performance metrics.

Decentralized mobility models for data collection in wireless sensor networks

Controlled mobility in wireless sensor networks provides many benefits towards enhancing the network performance and prolonging its lifetime. Mobile elements, acting as mechanical data carriers, traverse the network collecting data using single-hop communication, instead of the more energy demanding multi-hop routing to the sink. Scaling up from single to multiple mobiles is based more on the mobility models and the coordination methodology rather than increasing the number of mobile elements in the network. This work addresses the problem of designing and coordinating decentralized mobile elements for scheduling data collection in wireless sensor networks, while preserving some performance measures, such as latency and amount of data collected. We propose two mobility models governing the behaviour of the mobile element, where the incoming data collection requests are scheduled to service according to bidding strategies to determine the winner element. Simulations are run to measure the performance of the proposed mobility models subject to the network size and the number of mobile elements.

Performance of smart antennas with receive diversity in wireless sensor networks

In this paper we propose a Geometrically Based Single Bounce Elliptical Model (GBSBEM) for multipath components involving randomly placed scatterers in the scattering region with sensors deployed on a field. The system model assumes a cluster based wireless sensor network (WSN) which collects information from the sensors, filters and modulates the data and transmit it through a wireless channel to be collected at the receiver. We first develop a GBSBE model and based on this model we develop our channel model. Use of Smart antenna system at the receiver end, which exploits various receive diversity combining techniques like Maximal Ratio Combining (MRC), Equal Gain Combining (EGC), and Selection Combining (SC), adds novelty to this system. The performance of these techniques have been proved through matlab simulations and further ahead based on different number of antenna elements present at the receiver array, we calculate the performance of our system in terms of bit-error-rate (BER). Based on the transmission power we quantify for the energy efficiency of our communication model.

Using mobile agents to recover from node and database compromise in path-based DoS attacks in wireless sensor networks

Wireless sensor networks represent a new generation of real-time embedded systems with significantly different communication constraints from the traditional networked systems. With their development, a new attack called a path-based DoS (PDoS) attack has appeared. In a PDoS attack, an adversary, either inside or outside the network, overwhelms sensor nodes by flooding a multi-hop end-to-end communication path with either replayed packets or injected spurious packets. Detection and recovery from PDoS attacks have not been given much attention in the literature. In this article, we consider wireless sensor networks designed to collect and store data. In a path-based attack, both sensor nodes and the database containing collected data can be compromised. We propose a recovery method using mobile agents which can detect PDoS attacks easily and efficiently and recover the compromised nodes along with the database.

Energy-efficient medium access control in wireless sensor networks

Medium access control for wireless sensor networks has been an active
research area in the past decade. This chapter discusses a set of important medium access control (MAC) attributes and possible design trade-offs in protocol design, with an emphasis on energy efficiency. Then we categorize existing MAC protocols into five groups, outline the representative protocols, and compare their advantages and disadvantages in the context of wireless sensor network. Finally, thoughts for practitioners are presented and open research issues are also discussed.

Fast recovery from node compromise in wireless sensor networks

Wireless Sensor Networks (WSNs) are susceptible to a wide range of security attacks in hostile environments due to the limited processing and energy capabilities of sensor nodes. Consequently, the use of WSNs in mission critical applications requires reliable detection and fast recovery from these attacks. While much research has been devoted to detecting security attacks, very little attention has been paid yet to the recovery task. In this paper, we present a novel mechanism that is based on dynamic network reclustering and node reprogramming for recovering from node compromise. In response to node compromise, the proposed recovery approach reclusters the network excluding compromised nodes; thus allowing normal network operation while initiating node recovery procedures. We propose a novel reclustering algorithm that uses 2-hop neighbourhood information for this purpose. For node reprogramming we propose the modified Deluge protocol. The proposed node recovery mechanism is both decentralized and scalable. Moreover, we demonstrate through its implementation on a TelosB-based sensor network testbed that the proposed recovery method performs well in a low-resource WSN.

Lightweight authentication for recovery in wireless sensor networks

Wireless sensor networks (WSNs) suffer from a wide range of security attacks due to their limited processing and energy capabilities. Their use in numerous mission critical applications, however, requires that fast recovery from such attacks be achieved. Much research has been completed on detection of security attacks, while very little attention has been paid to recovery from an attack. In this paper, we propose a novel, lightweight authentication protocol that can secure network and node recovery operations such as re-clustering and reprogramming. Our protocol is based on hash functions and we compare the performance of two well-known lightweight hash functions, SHA-1 and Rabin. We demonstrate that our authentication protocol can be implemented efficiently on a sensor network test-bed with TelosB motes. Further, our experimental results show that our protocol is efficient both in terms of computational overhead and execution times which makes it suitable for low resourced sensor devices.

Intelligent based mobility models for data management in wireless sensor networks

Wireless sensor networks (WSNs) are proposed as powerful means for fine grained monitoring in different classes of applications at very low cost and for extended periods of time. Among various solutions, supporting WSNs with intelligent mobile platforms for handling the data management, proved its benefits towards extending the network lifetime and enhancing its performance. The mobility model applied highly affects the data latency in the network as well as the sensors’ energy consumption levels. Intelligent-based models taking into consideration the network runtime conditions are adopted to overcome such problems. In this chapter, existing proposals that use intelligent mobility for managing the data in WSNs are surveyed. Different classifications are presented through the chapter to give a complete view on the solutions lying in this domain. Furthermore, these models are compared considering various metrics and design goals.

Wireless sensor networks for in-situ image validation for water and nutrient management

Water and Nitrogen (N) are critical inputs for crop production. Remote sensing data collected from multiple scales, including ground-based, aerial, and satellite, can be used for the formulation of an efficient and cost effective algorithm for the detection of N and water stress. Formulation and validation of such techniques require continuous acquisition of ground based spectral data over the canopy enabling field measurements to coincide exactly with aerial and satellite observations. In this context, a wireless sensor in situ network was developed and this paper describes the results of the first phase of the experiment along with the details of sensor development and instrumentation set up. The sensor network was established based on different spatial sampling strategies and each sensor collected spectral data in seven narrow wavebands (470, 550, 670, 700, 720, 750, 790 nm) critical for monitoring crop growth. Spectral measurements recorded at required intervals (up to 30 seconds) were relayed through a multi-hop wireless network to a base computer at the field site. These data were then accessed by the remote sensing centre computing system through broad band internet. Comparison of the data from the WSN and an industry standard ground based hyperspectral radiometer indicated that there were no significant differences in the spectral measurements for all the wavebands except for 790nm. Combining sensor and wireless technologies provides a robust means of aerial and satellite data calibration and an enhanced understanding of issues of variations in the scale for the effective water and nutrient management in wheat.

Dynamic addressing in wireless sensor networks without location awareness

Sensor Networks have applications in diverse fields. They can be deployed for habitat modeling, temperature monitoring and industrial sensing. They also find applications in battlefield awareness and emergency (first) response situations. While unique addressing is not a requirement of many data collecting applications of wireless sensor networks, it is vital for the success of applications such as emergency response. Data that cannot be associated with a specific node becomes useless in such situations. In this work we propose a novel dynamic addressing mechanism for wireless sensor networks that are not location-aware. The scheme enables successful reuse of addresses in event-driven wireless sensor networks introducing minimal latencies and efficiently addressing packet loss. It also eliminates the need for network-wide Duplicate Address Detection (DAD) to ensure uniqueness of network level addresses.

Performance analysis of receive diversity in wireless sensor networks over GBSBE models

Wireless sensor networks have attracted a lot of attention recently. In this paper, we develop a channel model based on the elliptical model for multipath components involving randomly placed scatterers in the scattering region with sensors deployed on a field. We verify that in a sensor network, the use of receive diversity techniques improves the performance of the system. Extensive performance analysis of the system is carried out for both single and multiple antennas with the applied receive diversity techniques. Performance analyses based on variations in receiver height, maximum multipath delay and transmit power have been performed considering different numbers of antenna elements present in the receiver array, Our results show that increasing the number of antenna elements for a wireless sensor network does indeed improve the BER rates that can be obtained.