Development of an evidence-based scoring system (HF-IS) to assess the quality of heart failure programmes for patients postdischarge from hospital

Aim.  The aim of this study was to develop a potential scoring algorithm for interventions in a chronic heart failure management programme – the Heart Failure Intervention Score – to facilitate quality improvement and programme auditing.

Background.  The overall efficacy of chronic heart failure management programmes has been demonstrated in several meta-analyses. However, meta-analyses did not determine individual interventions in a programme that resulted in beneficial patient outcomes.

Design.  A prospective cross-sectional survey design.

Method.  All chronic heart failure management programmes in Australia (n = 62), identified by a national register, were surveyed to determine programme characteristics and interventions.

Results.  Of the 62 national chronic heart failure management programmes, 48 (77%) completed the survey and 27 individual interventions were identified. Variability in the use of the key interventions was common among the programmes. Each intervention was given an arbitrary weighted score according to the level of supportive evidence available and a total score calculated. Programmes were then categorised into low or high complexity based on several interventions implemented and their weighted score. A total score of ≥190 (median = 178, interquartile range 176–195) was used to divide programmes into two groups. Nine programmes were categorised into high Heart Failure Intervention Score group and majority of these were based in the acute hospital setting (78%). In the low Heart Failure Intervention Score group, there were 39 programmes of which there were a higher proportion of community-based programmes (38%) and programmes in small community hospitals (10%).

Conclusion.  The Heart Failure Intervention Score provides a potential evidence-based quality improvement tool through which a set of minimum standards can be developed. Implementation of the Heart Failure Intervention Score provides guidance to programme coordinators to enable monitoring of standards of heart failure programmes, which may potentially result in better patient outcomes.

2Loud? Monitoring traffic noise with mobile phones

The World Health Organization has recently focused attention on guidelines for night noise in urban areas, based on significant medical evidence of the adverse impacts of exposure to excessive traffic noise on health, especially caused by sleep disturbance. This includes serious illnesses, such as hypertension, arteriosclerosis and myocardial infarction. 2Loud? is a research project with the aim of developing and testing a mobile phone application to allow a community to monitor traffic noise in their environment, with focus on the night period and indoor measurement. Individuals, using mobile phones, provide data on characteristics of their dwellings and systematically record the level of noise inside their homes overnight. The records from multiple individuals are sent to a server, integrated into indicators and shared through mapping. The 2Loud? application is not designed to replace existing scientific measurements, but to add information which is currently not available. Noise measurements to assist the planning and management of traffic noise are normally carried out by designated technicians, using sophisticated equipment, and following specific guidelines for outdoors locations. This process provides very accurate records, however, for being a time consuming and expensive system, it results in a limited number of locations being surveyed and long time between updates. Moreover, scientific noise measurements do not survey inside dwellings. In this paper we present and discuss the participatory process proposed, and currently under implementation and test, to characterize the levels of exposure to traffic noise of residents living in the vicinity of highways in the City of Boroondara (Victoria, Australia) using the 2Loud? application.

Monitoring food and non-alcoholic beverage promotions to children

Food and non-alcoholic beverage marketing is recognized as an important factor influencing food choices related to non-communicable diseases. The monitoring of populations' exposure to food and non-alcoholic beverage promotions, and the content of these promotions, is necessary to generate evidence to understand the extent of the problem, and to determine appropriate and effective policy responses. A review of studies measuring the nature and extent of exposure to food promotions was conducted to identify approaches to monitoring food promotions via dominant media platforms. A step-wise approach, comprising ‘minimal’, ‘expanded’ and ‘optimal’ monitoring activities, was designed. This approach can be used to assess the frequency and level of exposure of population groups (especially children) to food promotions, the persuasive power of techniques used in promotional communications (power of promotions) and the nutritional composition of promoted food products. Detailed procedures for data sampling, data collection and data analysis for a range of media types are presented, as well as quantifiable measurement indicators for assessing exposure to and power of food and non-alcoholic beverage promotions. The proposed framework supports the development of a consistent system for monitoring food and non-alcoholic beverage promotions for comparison between countries and over time.

Effectiveness and feasibility of virtual reality and gaming system use at home by older adults for enabling physical activity to improve health-related domains: a systematic review

Background
use of virtual reality and commercial gaming systems (VR/gaming) at home by older adults is receiving attention as a means of enabling physical activity.

Objective
to summarise evidence for the effectiveness and feasibility of VR/gaming system utilisation by older adults at home for enabling physical activity to improve impairments, activity limitations or participation.

Methods
a systematic review searching 12 electronic databases from 1 January 2000–10 July 2012 using key search terms. Two independent reviewers screened yield articles using pre-determined selection criteria, extracted data using customised forms and applied the Cochrane Collaboration Risk of Bias Tool and the Downs and Black Checklist to rate study quality.

Results
fourteen studies investigating the effects of VR/gaming system use by healthy older adults and people with neurological conditions on activity limitations, body functions and physical impairments and cognitive and emotional well-being met the selection criteria. Study quality ratings were low and, therefore, evidence was not strong enough to conclude that interventions were effective. Feasibility was inconsistently reported in studies. Where feasibility was discussed, strong retention (≥70%) and adherence (≥64%) was reported. Initial assistance to use the technologies, and the need for monitoring exertion, aggravation of musculoskeletal symptoms and falls risk were reported.

Conclusions
existing evidence to support the feasibility and effectiveness VR/gaming systems use by older adults at home to enable physical activity to address impairments, activity limitations and participation is weak with a high risk of bias. The findings of this review may inform future, more rigorous research.

In-home monitoring of older adults with vision impairment: exploring patients', caregivers' and professionals' views

Objective
To develop a conceptual framework for the design of an in-home monitoring system (IMS) based on the requirements of older adults with vision impairment (VI), informal caregivers and eye-care rehabilitation professionals.

Materials and Methods
Concept mapping, a mixed-methods statistical research tool, was used in the construction of the framework. Overall, 40 participants brainstormed or sorted and rated 83 statements concerning an IMS for older adults with VI. Multidimensional scaling and hierarchical cluster analysis were employed to construct the framework. A questionnaire yielded further insights into the views of a wider sample of older adults with VI (n=78) and caregivers (n=25) regarding IMS.

Results
Concept mapping revealed a nine-cluster model of IMS-related aspects including affordability, awareness of system capabilities, simplicity of installation, operation and maintenance, system integrity and reliability, fall detection and safe movement, user customization, user preferences regarding information delivery, and safety alerts for patients and caregivers. From the questionnaire, independence, safety and fall detection were the most commonly reported reasons for older adults and caregivers to accept an IMS. Concerns included cost, privacy, security of the information obtained through monitoring, system accuracy, and ease of use.

Discussion
Older adults with VI, caregivers and professionals are receptive to in-home monitoring, mainly for fall detection and safety monitoring, but have concerns that must be addressed when developing an IMS.

Conclusion
Our study provides a novel conceptual framework for the design of an IMS that will be maximally acceptable and beneficial to our ageing and vision-impaired population.

Applications of a TransFLash in an embedded system debugging

In this paper, the hardware and software design for using a TF card in debugging an embedded system are described. The used hardware platform is designed based on a PXA310 application processor. The Android open source operating system is used as the software platform. The design of the connection circuit between the application processor and the TF card is introduced first. Secondly, the design of the TF card driver program and the method for Android system to mount the TF card are described. In designing the TF driver program, an SPI operation mode and FAT32 file system are used. The transplant of the FAT32 file system is presented more detail. Finally, the paper introduced the system debugging and the test results are given for the TF card used in a video data acquisition unit of a video monitoring. It is shown that high speed data exchange and good universal property can be obtained by using a TF card to download a system image during developing and debugging. The TF card used in debugging can be used as a mass storage in the embedded product without the need of changing the design for debugging the system and it is also convenient for a user to upgrade operating system.

Development and evaluation of a raman flow cell for monitoring continuous flow reactions

We show how in-line Raman spectroscopy can be used to monitor both reactant and product concentrations for a heterogeneously catalysed Suzuki cross reaction operating in continuous flow. The flow system consisted of an HPLC pump to drive a homogeneous mixture of the reactants (4-bromobenzonitrile, phenylboronic acid, and potassium carbonate) through an oven heated (80°C) palladium catalyst immobilised on a silica monolith. A custom built PTFE in-line flow cell with a quartz window enabled the coupling of an Ocean Optics Raman spectrometer probe to monitor both the reactants and product (4-cyanobiphenyl). Calibration was based on obtaining multivariate spectral data in the range 1530 cm–1 and 1640 cm–1 and using partial least-squares regression (PLSR) to obtain a calibration model which was validated using gas chromatography–mass spectrometry (GCMS) analysis. In-line Raman monitoring of the reactant and product concentrations enable (i) determination of reaction kinetic information such as the empirical rate law and associated rate constant and (ii) optimisation of either the product conversion (61 % at 0.02 mL min–1 generating 17 g h–1) or product yield (14 % at 0.24 mL min–1 generating 53 g h–1).

Development of an exposure database and surveillance system for use by practicing OSH professionals

This report summarizes the development of an occupational exposure database and surveillance system for use by health and safety professionals at Rocky Flats Environmental Technology Site (RFETS), a former nuclear weapons production facility. The site itself is currently in the cleanup stage with work expected to continue into 2006. The system was developed with the intent of helping health and safety personnel not only to manage and analyze exposure monitoring data, but also to identify exposure determinants during the highly variable cleanup work. Utilizing a series of focused meetings with health and safety personnel from two of the major contractors at RFETS, core data elements were established. These data elements were selected based on their utility for analysis and identification of exposure determinants. A task-based coding scheme was employed to better define the highly variable work. The coding scheme consisted of a two-tiered hierarchical list with a total of 34 possible combinations of work type and task. The data elements were incorporated into a Microsoft Access database with built-in data entry features to both promote consistency and limit entry choices to enable stratified analyses. In designing the system, emphasis was placed on the ability of end users to perform complex analyses and multiparameter queries to identify trends in their exposure data. A very flexible and user-friendly report generator was built into the system. This report generator allowed users to perform multiparameter queries using an intuitive system with very little training. In addition, a number of automated graphical analyses were built into the system, including ex posure levels by any combination of building, date, employee, job classification, type of contaminant, work type or task, exposure levels over time, exposure levels relative to the permissible exposure limit (PELS), and distributions of exposure levels. Both of these interfaces, allow the user to ''drill down'' or gradually narrow query criteria to identify specific exposure determinants. A number of other industrial hygiene processes were automated by the use of this database. Exposure calculations were coded into the system to allow automatic calculation of time-weighted averages and sample volumes. In addition, a table containing all the PELs and other relevant occupational exposure limits was built into the system to allow automatic comparisons with the current standards. Finally, the process of generating reports for employee notification was automated. The implementation of this system demonstrates that an integrated database system can save time for a practicing hygienist as well as provide useful and more importantly, timely information to guide primary prevention efforts.

Cloud-based non-invasive tele-rehabilitation exercise monitoring

Exercise based rehabilitation plays a vital role in the recovery of various conditions, such as stroke, Parkinson’s disease (PD), chronic pain, and so on. Recently, telerehabilitation has become increasingly popular quantitative nature in assessments particularly for systematic monitoring of progress as well as cost saving for the patients as well as for the health care sector at large. However, challenges do exist in implementing a distributed bio-feedback in a cost-effective and efficient way. In this paper, we present the associated conceptual framework of cloud-based tele-rehabilitation system employing affordable non-invasive Microsoft Kinect® allowing patients to perform rehabilitation exercises in non-clinical setting such as home environments without loosing the quality of patients care. More importantly, different from existing tele-rehabilitation systems, our system not only measures whether patients can perform rehabilitation tasks, but also how well they can finish the tasks. Preliminary experiments validate its potential in training healthy subject to perform exercise motions emulating the physical rehabilitation process.

Condition monitoring of broken rotor bars using a hybrid FMM-GA model

A condition monitoring system for induction motors using a hybrid Fuzzy Min-Max (FMM) neural network and Genetic Algorithm (GA) is presented in this paper. Two types of experiments, one from the finite element method and another from real laboratory tests of broken rotor bars in an induction motor are conducted. The induction motor with broken rotor bars is operated under different load conditions. FMM is first used for learning and distinguishing between a healthy motor and one with broken rotor bars. The GA is then utilized for extracting fuzzy if-then rules using the don’t care approach in minimizing the number of rules. The results clearly demonstrate the effectiveness of the hybrid FMM-GA model in condition monitoring of broken rotor bars in induction motors.

Multi-Kinect skeleton fusion for physical rehabilitation monitoring

 Kinect has been increasingly applied in rehabilitation as a motion capture device. However, the inherent limitations significantly hinder its further development in this important area. Although a number of Kinect fusion approaches have been proposed, only a few of them was actually considered for rehabilitation. In this paper, we propose to fuse information from multiple Kinects to achieve this. Given the specific scenario of users suffering from limited range of movements, we propose to calibrate depth cameras in multiple Kinects with 3D positions of joints on a human body rather than in a checkerboard pattern, so that patients are able to calibrate Kinects without extra support. Kalman filter is applied for skeleton-wise Kinect fusion since skeleton data (3D positions of joints) and its derivatives are preferred by physiotherapists to evaluate the exercise performance of patients. Various preliminary experiments were conducted to illustrate the accuracy of proposed calibration and fusion approach by comparing with a commercial Vicon system®, confirming the practical use of the system in rehabilitation exercise monitoring.

Investigation of hydraulic fracture propagation using a post-peak control system coupled with acoustic emission

This study investigates the fracture mechanism of fluid coupled with a solid resulting from hydraulic fracture. A new loading machine was designed to improve upon conventional laboratory hydraulic fracture testing and to provide a means of better understanding fracture behavior of solid media. Test specimens were made of cement mortar. An extensometer and acoustic emission (AE) monitoring system recorded the circumferential deformation and crack growth location/number during the test. To control the crack growth at the post-peak stage the input fluid rate can be adjusted automatically according to feedback from the extensometer. The complete stress-deformation curve, including pre- and post-peak stages, was therefore obtained. The crack extension/growth developed intensively after the applied stress reached the breakdown pressure. The number of cracks recorded by the AE monitoring system was in good agreement with the amount of deformation (expansion) recorded by the extensometer. The results obtained in this paper provide a better understanding of the hydraulic fracture mechanism which is useful for underground injection projects. © 2014 Springer-Verlag Wien.

Healthcare in continuum for an ageing population - national self monitoring or remote offshore monitoring for Australia?

Australia is a country, similar to other developed nations, confronting an ageing population with complex demographics. Ensuring continued healthcare for the ageing, while providing sufficient support for the already aged population requiring assistance, is at the forefront of the national agenda. Varied initiatives are with foci to leverage the advantages of ICTs leading to e-Health provisioning and assisted technologies. While these initiatives increasingly put budgetary constraints on local and federal governments, there is also a case for offshore resourcing of non-critical health services, to support, streamline and enhance the continuum of care, as the nation faces acute shortages of medical practitioners and nurses. However, privacy and confidentiality concerns in this context are a significant issue in Australia. In this paper, we take the position that if the National and state electronic health records system initiatives, are fully implemented, offshore resourcing can be a feasible complementary option resulting in a win-win situation of cutting costs and enabling the continuum of healthcare.

Monitoring and evaluating surgical care: defining perioperative mortality rate and standardising data collection

BACKGROUND: Case volume per 100 000 population and perioperative mortality rate (POMR) are key indicators to monitor and strengthen surgical services. However, comparisons of POMR have been restricted by absence of standardised approaches to when it is measured, the ideal denominator, need for risk adjustment, and whether data are available. We aimed to address these issues and recommend a minimum dataset by analysing four large mixed surgical datasets, two from well-resourced settings with sophisticated electronic patient information systems and two from resource-limited settings where clinicians maintain locally developed databases. METHODS: We obtained data from the New Zealand (NZ) National Minimum Dataset, the Geelong Hospital patient management system in Australia, and purpose-built surgical databases in Pietermaritzburg, South Africa (PMZ) and Port Moresby, Papua New Guinea (PNG). Information was sought on inclusion and exclusion criteria, coding criteria, and completeness of patient identifiers, admission, procedure, discharge and death dates, operation details, urgency of admission, and American Society of Anesthesiologists (ASA) score. Date-related errors were defined as missing dates and impossible discrepancies. For every site, we then calculated the POMR, the effect of admission episodes or procedures as denominator, and the difference between in-hospital POMR and 30-day POMR. To determine the need for risk adjustment, we used univariate and multivariate logistic regression to assess the effect on relative POMR for each site of age, admission urgency, ASA score, and procedure type. FINDINGS: 1 365 773 patient admissions involving 1 514 242 procedures were included, among which 8655 deaths were recorded within 30 days. Database inclusion and exclusion criteria differed substantially. NZ and Geelong records had less than 0·1% date-related errors and greater than 99·9% completeness. PMZ databases had 99·9% or greater completeness of all data except date-related items (94·0%). PNG had 99·9% or greater completeness for date of birth or age and admission date and operative procedure, but 80-83% completeness of patient identifiers and date related items. Coding of procedures was not standardised, and only NZ recorded ASA status and complete post-discharge mortality. In-hospital POMR range was 0·38% in NZ to 3·44% in PMZ, and in NZ it underestimated 30-day POMR by roughly a third. The difference in POMR by procedures instead of admission episodes as denominator ranged from 10% to 70%. Age older than 65 years and emergency admission had large independent effects on POMR, but relatively little effect in multivariate analysis on the relative odds of in-hospital death at each site. INTERPRETATION: Hospitals can collect and provide data for case volume and POMR without sophisticated electronic information systems. POMR should initially be defined by in-hospital mortality because post-discharge deaths are not usually recorded, and with procedures as denominator because details allowing linkage of several operations within one patient's admission are not always present. Although age and admission urgency are independently associated with POMR, and ASA and case mix were not included, risk adjustment might not be essential because the relative odds between sites persisted. Standardisation of inclusion criteria and definitions is needed, as is attention to accuracy and completeness of dates of procedures, discharge and death. A one-page, paper-based form, or alternatively a simple electronic data collection form, containing a minimum dataset commenced in the operating theatre could facilitate this process. FUNDING: None.

An audio signal based model for condition monitoring of sheet metal stamping process

Tool condition monitoring is an important factor in ensuring manufacturing efficiency and product quality. Audio signal based methods are a promising technique for condition monitoring. However, the influence of interfering signals and background noise has hindered the use of this technique in production sites. Blind signal separation (BSS) has the potential to solve this problem by recovering the signal of interest out of the observed mixtures, given that the knowledge about the BSS model is available. In this paper, we discuss the development of the BSS model for sheet metal stamping with a mechanical press system, so that the BSS techniques based on this model can be developed in future. This involves conducting a set of specially designed machine operations and developing a novel signal extraction technique. Also, the link between stamping process conditions and the extracted audio signal associated with stamping was successfully demonstrated by conducting a series of trials with different lubrication conditions and levels of tool wear.