General synthesis of two-dimensional patterned conducting polymer-nanobowl sheet via chemical polymerization

A general method for the generation of two-dimensional (2D) ordered, large-area, and liftable conducting polymer-nanobowl sheet has been demonstrated via chemical polymerization for the first time. The sheet is made using the monolayer self-assembled from polystyrene (PS) spheres at the aqueous/air interface as template, followed by depositing conducting polymer on the part of PS monolayer submerging in the aqueous phase via chemical polymerization, and core extraction. During the process of polymerization, no substrate is required, which caused the as-prepared patterned conducting polymer sheet can be easily lifted-off and deposited, in full size, on any flat substrate. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier transform infrared (FTIR) spectrum were used to characterize the products

Violence and the sacred : Patrick White's radical vision

This chapter focuses on both the fiction of Patrick White and the connections between sacredness and violence.

Simultaneous polymerization and crosslinking for the synthesis of molecular-level graphene oxide-polyacryl amide-CeOx composites

Synthesis of molecular-level multiple-component composites are particularly challenging due to the lack of direct bonding among different components. In this study, molecular-level graphene oxide (GO)-polyacryl amide (PAM)-CeOx composites were successfully synthesized, using the simultaneous polymerization and crosslinking strategy. Attenuated total reflection Fourier transform infrared (ATR-FTIR) and nuclear magnetic resonance (NMR) techniques confirmed that polyacryl amide (PAM) chains were successfully grafted onto the surface of GO. X-ray photoelectron spectroscopic (XPS) and X-ray diffraction (XRD) analyses further revealed the characteristic signals of cerium elements and CeO2 phase respectively. Scanning electron microscopy (SEM) showed that the surface morphology of the GO-PAM-CeOx composites was substantially thicker and rougher than those of the original GO. Further exploration of the reaction mechanism clearly demonstrate the existence of strong chelating interaction among PAM chains and Ce(IV) ions. In particular, the polymerization of acryl amide monomers and the crosslinking reaction between PAM and Ce(IV) or Ce(III) ions were realized simultaneously, leading to the final formation of molecular-level GO-PAM-CeOx composites. Moreover, the as-synthesized GO-PAM-CeOx composites were capable of effectively decomposing Rhodamine B under simulated sunlight, making it a potential candidate as a new photo catalyst. To sum up, this report demonstrates the potential utility of simultaneous polymerization and crosslinking method for the synthesis of other multiple-component composites at molecular-level.

Prediction interval-based neural network modelling of polystyrene polymerization reactor - a new perspective of data-based modelling

In this paper, prediction interval (PI)-based modelling techniques are introduced and applied to capture the nonlinear dynamics of a polystyrene batch reactor system. Traditional NN models are developed using experimental datasets with and without disturbances. Simulation results indicate that traditional NNs cannot properly handle disturbances in reactor data and demonstrate a poor forecasting performance, with an average MAPE of 22% in the presence of disturbances. The lower upper bound estimation (LUBE) method is applied for the construction of PIs to quantify uncertainties associated with forecasts. The simulated annealing optimization technique is employed to adjust NN parameters for minimization of an innovative PI-based cost function. The simulation results reveal that the LUBE method generates quality PIs without requiring prohibitive computations. As both calibration and sharpness of PIs are practically and theoretically satisfactory, the constructed PIs can be used as part of the decision-making and control process of polymerization reactors. © 2014 The Institution of Chemical Engineers.

The ProCaSP study: quality of life outcomes of prostate cancer patients after radiotherapy or radical prostatectomy in a cohort study urological oncology

Background: This study describes and compares health-related quality of life (HRQOL) of prostate cancer patients who received either radical prostatectomy (nerve-sparing, nsRP, or non-nerve-sparing, nnsRP) or radiotherapy (external RT, brachytherapy, or both combined) for treatment of localised prostate cancer. Methods: The prospective, multicenter cohort study included 529 patients. Questionnaires included the IIEF, QLQ-C30, and PORPUS-P. Data were collected before (baseline), three, six, twelve, and twenty-four months after treatment. Differences between groups' baseline characteristics were assessed; changes over time were analysed with generalised estimating equations (GEE). Missing values were treated with multiple imputation. Further, scores at baseline and end of follow-up were compared to German reference data. Results: The typical time trend was a decrease of average HRQOL three months after treatment followed by (partial) recovery. RP patients experienced considerable impairment in sexual functioning. The covariate-adjusted GEE identified a significant - but not clinically relevant - treatment effect for diarrhoea (b∈=∈7.0 for RT, p∈=∈0.006) and PORPUS-P (b∈=∈2.3 for nsRP, b∈=∈2.2 for RT, p∈=∈0.045) compared to the reference nnsRP. Most of the HRQOL scores were comparable to German norm values. Conclusions: Findings from previous research were reproduced in a specific setting of a patient cohort in the German health care system. According to the principle of evidence-based medicine, this strengthens the messages regarding treatment in prostate cancer and its impacts on patients' health-related quality of life. After adjustment for baseline HRQOL and other covariates, RT patients reported increased symptoms of diarrhoea, and nnsRP patients decreased prostate-specific HRQOL. RP patients experienced considerable impairment in sexual functioning. These differences should be taken into account by physicians when choosing the best therapy for a patient.

Amine enrichment of thin-film composite membranes via low pressure plasma polymerization for antimicrobial adhesion

Thin-film composite membranes, primarily based on poly(amide) (PA) semipermeable materials, are nowadays the dominant technology used in pressure driven water desalination systems. Despite offering superior water permeation and salt selectivity, their surface properties, such as their charge and roughness, cannot be extensively tuned due to the intrinsic fabrication process of the membranes by interfacial polymerization. The alteration of these properties would lead to a better control of the materials surface zeta potential, which is critical to finely tune selectivity and enhance the membrane materials stability when exposed to complex industrial waste streams. Low pressure plasma was employed to introduce amine functionalities onto the PA surface of commercially available thin-film composite (TFC) membranes. Morphological changes after plasma polymerization were analyzed by SEM and AFM, and average surface roughness decreased by 29%. Amine enrichment provided isoelectric point changes from pH 3.7 to 5.2 for 5 to 15 min of plasma polymerization time. Synchrotron FTIR mappings of the amine-modified surface indicated the addition of a discrete 60 nm film to the PA layer. Furthermore, metal affinity was confirmed by the enhanced binding of silver to the modified surface, supported by an increased antimicrobial functionality with demonstrable elimination of E. coli growth. Essential salt rejection was shown minimally compromised for faster polymerization processes. Plasma polymerization is therefore a viable route to producing functional amine enriched thin-film composite PA membrane surfaces.

Adult education and radical habitus in an environmental campaign: learning in the coal seam gas protests in Australia

Summary: This paper examines the adult learning dimensions of protestors as they participate in a campaign to stop coal seam gas exploration in Gippsland in Central Victoria, Australia. On a global level, the imposition of coal seam gas exploration by governments and mining companies has been the trigger for movements of resistance from environmental groups. They are concerned about the impact of mining on their land, food and water supplies. In central Gippsland a group of ‘circumstantial activists’ comprised of farmers, tree changers and other local residents are campaigning against coal seam gas exploration. This unlikely coalition of environmental action groups has made effective use of a variety of community education strategies. This paper commences by outlining some of the key literature on learning and activism drawing on the education tradition of adult learning. We then draw on key concepts from Bourdieu’s writing on ‘habitus’ and ‘field’ to analyse the data from this research. We outline some of the learning practices of activists; through their involvement in this campaign, and the knowledge and skills they gain as they develop a feel for the game of protest. We argue circumstantial activists learn both formally and informally in the social environment of campaigning. Of particular interest is the role of more experienced activists from Friends of the Earth (FOE), a non-government organisation (NGO), as they pass on knowledge, experience, tactics and strategies to the novice and less experienced activists in this community campaign. We explore some of the contradictions of the protestors’ identification as activists using Bourdieu’s concepts of ‘doxa’ and ‘Ilusio’. The paper concludes by arguing learning in activism is a rich tradition of adult education and practice. However, Bourdieu’s writing on field and habitus makes an added contribution to interpreting the learning that occurs in the social space of a campaign or social movement.

Synthesis and performance of itaconic acid/acrylamide/sodium styrene sulfonate as a self-adapting retarder for oil well cement

This journal is © The Royal Society of Chemistry. A novel self-adapting retarder itaconic acid/acrylamide/sodium styrene sulfonate (IA/AM/SSS, hereinafter referred to as PIAS) was synthesized by free-radical, aqueous-solution polymerization and characterized by FTIR and TG. The optimum reaction conditions of polymerization were obtained from orthogonal experiments (L3³) and subsequent data analysis. According to the evaluation as a retarder, the PIAS made it possible to obtain both a long thickening time and a swift compressive strength development for cement slurry, and therefore the applicable range of bottom hole circulation temperatures to the cement slurry has been widened to 60-180°C. Moreover, the working mechanism of the self-adapting retarder PIAS was found to rely on the change of spatial structure of the molecules to retard the hydration of the cement. This paper also expounds that the delayed coagulation of the cement slurry is attributed to adsorption, chelation and "poisoning" effects of the PIAS molecules on the surface of hydrated particles or ions through XRD and SEM analyses.