The implications of adult morphology for clutch size in the flatback turtle (Natator depressa)

When the mean adult length and mean clutch volume of marine turtles are examined, a clear pattern for larger species to lay larger clutches is evident, in accord with predictions that female size constrains the available space for carrying eggs. However, when compared with this general trend, the volume of clutches laid by flatback turtles (Natator depressa) are smaller than expected. The implication is that the unusually flat morphology of flatback turtles, provides an additional constraint on their egg carrying capacity.

Interspecific differences in the Diel Vertical Migration of Marine Copepods : the Implications of size, color, and morphology

Samples collected by continuous plankton recorders (CPRs) between 1948 and 1992 were used to describe the diel vertical migration (DVM) behavior of 41 copepod taxa in the northeast Atlantic between 45 and 55?N and 11 and 31?W. A total of 13,622 samples, each representing - 18.5 km (10 nm) of tow, were analyzed. Since CPRs are towed in near-surface waters, taxa that exhibit DVM occur predominantly in samples taken at night. Larger taxa showed significantly stronger DVM, with body size explaining 47% of the intertaxa variation in DVM. For small taxa (< 1 mm wide) the residual variation in DVM was correlated with carotenoid pigment levels but not with body morphology, with more heavily pigmented taxa exhibiting DVM. For larger taxa (> 1 mm wide) the residual variation in DVM was correlated with body morphology but not with carotenoid pigment levels, with more elongate copepods not exhibiting DVM.

Ion conduction and phase morphology in sulfonate copolymer ionomers based on ionic liquid–sodium cation mixtures

A series of sulfonate based copolymer ionomers based on a combination of ionic liquid and sodium cations have been prepared in different ratios. This system was designed to improve the ionic conductivity of ionomers by partially replacing sodium cations with bulky cations that are less associated with anion centres on the polymer backbone. This provides more conduction sites for sodium to ‘hop’ to in the ionomers. Characterization showed the glass transition and 15N chemical shift of the ionomers did not vary significantly as the amount of Na+ varied, while the ionic conductivity increased with decreasing Na+ content, indicating conductivity is increasingly decoupled from Tg. Optical microscope images showed phase separation in all compositions, which indicated the samples were inhomogeneous. The introduction of low molecular weight plasticizer (PEG) reduced the Tg and increased the ionic conductivity significantly. The inclusion of PEG also led to a more homogeneous material.

Synthesis of single-crystalline LiFePO4 with rhombus-like morphology

In this investigation, carbon-coated LiFePO4 cathode materials were synthesized with a facile hydrothermal method. The structure and electrochemical properties of the materials were investigated by X-ray diffraction (XRD), Roman, transmission electron microscopy-energy dispersive spectroscopy (TEM-EDS), and electrochemical impedance spectroscopy (EIS). By adjusting the mixing concentration of starting materials, a single-crystalline LiFePO4 with an anisotropic rhombus morphology (Space Group: Pmnb No. 62) were successfully synthesized. In addition, the carbon coated on the surface of LiFePO4 material prepared has a lower ID/IG (0.80), which indicates an optimized carbon structure with an increased amount of sp2-type carbon. Electrochemical performance test shows that the carbon-coated LiFePO4 cathode materials have an initial discharge capacity of 146 mAh g−1 at 0.2C.

Molecular-level dispersion of graphene into epoxidized natural rubber: Morphology, interfacial interaction and mechanical reinforcement

The interfacial interaction of composites dominates the properties of polymeric/inorganic nanocomposites. Herein, epoxy and hydroxyl groups are introduced into the natural rubber (NR) molecular chains to anchor oxygenous functional groups on the surface of graphene oxide (GO) sheets and therefore enhance the interfacial interaction between GO and rubber. From the morphological observation and interaction analysis, it is found that epoxidized natural rubber (ENR) latex particles are assembled onto the surfaces of GO sheets by employing hydrogen bonding interaction as driving force. This self-assembly depresses restacking and agglomeration of GO sheets and leads to homogenous dispersion of GO within ENR matrix. The formation of hydrogen bonding interface between ENR and GO demonstrates a significant reinforcement for the ENR host. Compared with those of pure ENR, the composite with 0.7 wt% GO loading receives 87% increase in tensile strength and 8.7 fold increase in modulus at 200% elongation after static in-situ vulcanization.

New insights into the thermal behaviour of organic ionic plastic crystals: magnetic resonance imaging of polycrystalline morphology alterations induced by solid-solid phase transitions

Organic ionic plastic crystals (OIPCs) show strong potential as solid-state electrolytes for lithium battery applications, demonstrating promising electrochemical performance and eliminating the need for a volatile and flammable liquid electrolyte. The ionic conductivity (σ) in these systems has recently been shown to depend strongly on polycrystalline morphology, which is largely determined by the sample's thermal history. [K. Romanenko et al., J. Am. Chem. Soc., 2014, 136, 15638]. Tailoring this morphology could lead to conductivities sufficiently high for battery applications, so a more complete understanding of how phenomena such as solid-solid phase transitions can affect the sample morphology is of significant interest. Anisotropic relaxation of nuclear spin magnetisation provides a new MRI based approach for studies of polycrystalline materials at both a macroscopic and molecular level. In this contribution, morphology alterations induced by solid-solid phase transitions in triisobutyl(methyl)phosphonium bis(fluorosulfonyl)imide (P1444FSI) and diethyl(methyl)(isobutyl)phosphonium hexafluorophosphate (P1224PF6) are examined using magnetic resonance imaging (MRI), alongside nuclear magnetic resonance (NMR) spectroscopy, diffusion measurements and conductivity data. These observations are linked to molecular dynamics and structural behaviour crucial for the conductive properties of OIPCs. A distinct correlation is established between the conductivity at a given temperature, σ(T), and the intensity of the narrow NMR signal that is attributed to a mobile fraction, fm(T), of ions in the OIPC. To explain these findings we propose an analogy with the well-studied relationship between permeability (k) and void fraction (θ) in porous media, with k(θ) commonly quantified by a power-law dependence that can also be employed to describe σ(fm).

Geographical variation and population structure in the White-rumped Sandpiper Calidris fuscicollis as shown by morphology, mitochondrial DNA and carbon isotope ratios

We studied the population structure of a high arctic breeding wader bird species, the White-rumped Sandpiper Calidris fuscicollis. Breeding adults, chicks and juveniles were sampled at seven localities throughout the species' breeding range in arctic Canada in 1999. The mitochondrial control region was analysed by DNA sequencing, feathers were analysed for carbon isotope ratios (C13/C12) by isotope ratio mass spectrometry, and morphological measurements were analysed using principal component analyses, taking the effect of sex into account (identified by molecular genetic methods). In general, our results support the notion that the White-rumped Sandpiper is a monotypic species with no subspecies, and most of the morphological and genetic variation occurs within sites. Nevertheless, some differences between sites were found. Birds from the two northernmost sites (Ellesmere and Devon Islands) had relatively longer bill and wing and shorter tarsus than birds sampled further south, possibly reflecting genetic differences between populations. The carbon isotope ratios were higher at the easternmost site (Baffin Island), revealing differences in the isotope content of the food. The mtDNA sequences showed no significant differentiation between sites and no pattern of isolation-by-distance was found. Based on the mtDNA variation, the species was estimated to have a long-term effective population size of approximately 9,000 females. The species shows no clear evidence of any population expansion or decline. Our results indicate that carbon isotope ratios, and possibly also certain mtDNA haplotypes, may be useful as tools for identifying the breeding origin of White-rumped Sandpipers on migration and wintering sites.

Effect of martensite morphology on low cycle fatigue behaviour of dual phase steels: Experimental and microstructural investigation

The low cycle fatigue (LCF) behaviour of a dual phase (DP) steel with different martensite morphologies has been investigated in the present work. DP steels with coarse martensite morphologies show inferior LCF life in comparison with fine martensite morphologies for all martensite volume fractions examined. It is suggested that this is be due to the development of larger local plastic strain concentrations in the ferrite with a coarser microstructure, compared to the finer microstructural morphology. Fatigue cracks were observed to initiate inside ferrite grains, and to preferentially propagate through the softer ferrite phase. The average sub-cell size was finer in samples with higher martensite volume fractions, but the sub-cell size was almost unaffected by the martensite morphology.

Morphology and mechanical properties of nanostructured thermoset/block copolymer blends with carbon nanoparticles

Here we report the effect of multi-walled carbon nanotubes (MWCNTs) and thermally reduced graphene (TRG) on the miscibility, morphology and final properties of nanostructured epoxy resin with an amphiphilic poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymer. The addition of nanoparticles did not have any influence on the miscibility of PEO-PPO-PEO copolymer in the resin. However, MWCNTs and TRG reduced the degree of crystallinity of the PEO-rich microphases in the blends above 10 wt.% of copolymer while they did not change the phase morphology at the nanoscale, where PPO spherical domains of 20-30 nm were found in all the samples studied. A synergic effect between the self-assembled nanostructure and the nanoparticles on the toughness of the cured resin was observed. In addition, the nanoparticles minimized the negative effect of the copolymer on the elastic modulus and glass transition temperature in the resin.