Relationship between lower limb neuromuscular performanceand bone strength in postmenopausal women with mild knee osteoarthritis

Objectives: To investigate whether neuromuscular performance predicts lower limb bone strength in different lower limb sites in postmenopausal women with mild knee osteoarthritis (OA). Methods: Neuromuscular performance of 139 volunteer women aged 50-68 with mild knee OA was measured using maximal counter movement jump test, isometric knee flexion and extension force and figure-of-eight-running test. Femoral neck section modulus (Z, mm3) was determined by data obtained from dualenergy X-ray absorptiometry. Data obtained using peripheral quantitative computed tomography was used to asses distal tibia compressive (BSId, g2/cm4) and tibial mid-shaft bending (SSImaxmid, mm3) strength indices. Results: After adjustment for height, weight and age, counter movement jump peak power production was the strongest independent predictor for Z (β=0.44; p<0.001) and for BSId (β=0.32; p=0.003). This was also true in concentric net impulse for Z (β=0.37; p=0.001) and for BSId (β=0.40; p<0.001). Additionally, knee extension force (β=0.30; p<0.001) and figure-of-eight-running test (β= -0.32; p<0.001) were among strongest independent predictors for BSId after adjustments. For SSImaxmid, concentric net impulse (β=0.33; p=0.002) remained as the strongest independent predictor after adjustments. Conclusions: Neuromuscular performance in postmenopausal women with mild knee OA predicted lower limb bone strength in every measured skeletal site.

Roll-formability of cryo-rolled ultrafine aluminium sheet

Ultrafine-grain aluminium sheet was produced by rolling at cryogenic (CR) and at room temperature (RTR). Commercial purity aluminium plate was reduced in 30 passes from an initial material thickness of 10 mm to a final thickness of 2 mm (80% reduction). Tensile stress and strength were significantly increased while total elongation was drastically reduced. It was found that despite the low tensile elongation both materials are able to accommodate high localised strains in the neck leading to a high reduction in area. The formability of the material was further investigated in bending operations. A minimum bending radius of 6 mm (CR) and 5 mm (RTR) was found and pure bending tests showed homogeneous forming behaviour for both materials. In V-die bending the cryo-rolled material showed strain localisations across the final radius and kinking of the sample. It has been found that even if the total elongation in tension is close to zero leading to early failure in V-die bending, ultra-fine grained and low ductile sheet metals can be roll formed to simple section shapes with small radii using commercial roll forming equipment.

Using an evidence-based care bundle to improve Thai emergency nurses' knowledge of care for patients with severe traumatic brain injury

There is known variation in Thai nurses' knowledge regarding the best available evidence for care of patients with severe traumatic brain injury. The purpose of this study was to examine the impact of an evidence-based care bundle on Thai emergency nurses' knowledge regarding management of patients with severe traumatic brain injury. A pre-test/post-test design was used. The study intervention was an evidence-based care bundle for initial nursing management of patients with severe traumatic brain injury. Data were collected from 31 Registered Nurses using multiple choice questions. Results revealed a statistically significant improvement in overall knowledge scores after care bundle implementation (p < 0.001). There were statistically significant improvements in five areas of knowledge: understanding of target end-tidal carbon dioxide levels (p < 0.001), implications of hypocapnia in severe traumatic brain injury (p = 0.01), implications of hypercapnia in severe traumatic brain injury (p = 0.02), importance of maintaining head and neck in neutral position (p = 0.05), and administration of sedatives and analgesics in severe traumatic brain injury (p = 0.01). This study suggested that implementation of an evidence-based care bundle improved emergency nurses' knowledge regarding management of patients with severe traumatic brain injury.

Femoroacetabular impingement osteoplasty is any resected amount safe? A laboratory based experiment with sawbones

There is an increased risk of fracture following osteoplasty of the femoral neck for cam-type femoroacetabular impingement (FAI). Resection of up to 30% of the anterolateral head–neck junction has previously been considered to be safe, however, iatrogenic fractures have been reported with resections within these limits. We re-evaluated the amount of safe resection at the anterolateral femoral head–neck junction using a biomechanically consistent model.In total, 28 composite bones were studied in four groups: control, 10% resection, 20% resection and 30% resection. An axial load was applied to the adducted and flexed femur. Peak load, deflection at time of fracture and energy to fracture were assessed using comparison groups.There was a marked difference in the mean peak load to fracture between the control group and the 10% resection group (p < 0.001). The control group also tolerated significantly more deflection before failure (p < 0.04). The mean peak load (p = 0.172), deflection (p = 0.547), and energy to fracture (p = 0.306) did not differ significantly between the 10%, 20%, and 30% resection groups.Any resection of the anterolateral quadrant of the femoral head–neck junction for FAI significantly reduces the load-bearing capacity of the proximal femur. After initial resection of cortical bone, there is no further relevant loss of stability regardless of the amount of trabecular bone resected.Based on our findings we recommend any patients who undergo anterolateral femoral head–neck junction osteoplasty should be advised to modify their post-operative routine until cortical remodelling occurs to minimise the subsequent fracture risk.

Fracture prediction from repeat BMD measurements in clinical practice

Summary: We investigated whether repeat BMD measurements in clinical populations are useful for fracture risk assessment. We report that repeat BMD measurements are a robust predictor of fracture in clinical populations; this is not affected by preceding BMD change or recent osteoporosis therapy. Introduction: In clinical practice, many patients selectively undergo repeat bone mineral density (BMD) measurements. We investigated whether repeat BMD measurements in clinical populations are useful for fracture risk assessment and whether this is affected by preceding change in BMD or recent osteoporosis therapy. Methods: We identified women and men aged ≥50 years who had a BMD measurement during 1990–2009 from a large clinical BMD database for Manitoba, Canada (n = 50,215). Patient subgroups aged ≥50 years at baseline with repeat BMD measures were identified. Data were linked to an administrative data repository, from which osteoporosis therapy, fracture outcomes, and covariates were extracted. Using Cox proportional hazards models, we assessed covariate-adjusted risk for major osteoporotic fracture (MOF) and hip fracture according to BMD (total hip, lumbar spine, femoral neck) at different time points. Results: Prevalence of osteoporosis therapy increased from 18 % at baseline to 55 % by the fourth measurement. Total hip BMD was predictive of MOF at each time point. In the patient subgroup with two repeat BMD measurements (n = 13,481), MOF prediction with the first and second measurements was similar: adjusted-hazard ratio (HR) per SD 1.45 (95 % CI 1.34–1.56) vs. 1.64 (95 % CI 1.48–1.81), respectively. No differences were seen when the second measurement results were stratified by preceding change in BMD or osteoporosis therapy (both p-interactions >0.2). Similar results were seen for hip fracture prediction and when spine and femoral neck BMD were analyzed. Conclusion: Repeat BMD measurements are a robust predictor of fracture in clinical populations; this is not affected by preceding BMD change or recent osteoporosis therapy.

Humeral fractures in South-Eastern Australia: epidemiology and risk factors

In this study, we report the epidemiology and risk factors for humeral fractures (proximal humerus and shaft) among men and women residing in south-eastern Australia. Incident fractures during 2006 and 2007 were identified using X-ray reports (Geelong Osteoporosis Study Fracture Grid). Risk factors were identified using data from case-control studies conducted as part of the Geelong Osteoporosis Study. Median age of fracture was lower in males than females for proximal humerus (33.0 vs 71.2 years), but not for humeral shaft (8.9 vs 8.5 years). For females, proximal humerus fractures occurred mainly in the 70-79 and 80+ years age groups, whereas humeral shaft fractures followed a U-shaped pattern. Males showed a U-shaped pattern for both proximal humerus and humeral shaft fractures. Overall age-standardised incidence rates for proximal humerus fractures in males and females were 40.6 (95 % CI 32.7, 48.5) and 73.2 (95 % CI 62.2, 84.1) per 100,000 person years, respectively. For humeral shaft fractures, the age-standardised rate was 69.3 (95 % CI 59.0, 79.6) for males and 61.5 (95 % CI 51.9, 71.0) for females. There was an increase in risk of proximal humerus fractures in men with a lower femoral neck BMD, younger age, prior fracture and higher milk consumption. In pre-menopausal women, increased height and falls were both risk factors for proximal humerus fractures. For post-menopausal women, risk factors associated with proximal humerus fractures included a lower non-milk dairy consumption and sustaining a prior fracture. Humeral shaft fractures in both sexes were sustained mainly in childhood, while proximal humerus fractures were sustained in older adulthood. The overall age-standardised rates of proximal humerus fractures were nearly twice as high in females compared to males, whereas the incidence rates of humeral shaft fractures were similar.

Hypertrophy in the cervical muscles and thoracic discs in bed rest?

The impact of prolonged bed rest on the cervical and upper thoracic spine is unknown. In the 2nd Berlin BedRest Study (BBR2-2), 24 male subjects underwent 60-day bed rest and performed either no exercise, resistive exercise, or resistive exercise with whole body vibration. Subjects were followed for 2 yr after bed rest. On axial cervical magnetic resonance images from the skull to T3, the volumes of the semispinalis capitis, splenius capitis, spinalis cervicis, longus capitis, longus colli, levator scapulae, sternocleidomastoid, middle and posterior scalenes, and anterior scalenes were measured. Disc height, anteroposterior width, and volume were measured from C2/3 to T6/7 on sagittal images. The volume of all muscles, with the exception of semispinalis capitis, increased during bed rest (P < 0.025). There were no significant differences between the groups for changes in the muscles. Increased upper and midthoracic spine disc height and volume (P < 0.001) was seen during bed rest, and disc height increases persisted at least 6 mo after bed rest. Increases in thoracic disc height were greater (P = 0.003) in the resistive vibration exercise group than in control. On radiological review, two subjects showed new injuries to the mid-lower thoracic spine. One of these subjects reported a midthoracic pain incident during maximal strength testing before bed rest and the other after countermeasure exercise on day 3 of bed rest. We conclude that bed rest is associated with increased disc size in the thoracic region and increases in muscle volume at the neck. The exercise device needs to be modified to ensure that load is distributed in a more physiological fashion.

Quick chip assay using locked nucleic acid modified epithelial cell adhesion molecule and nucleolin aptamers for the capture of circulating tumor cells

The role of circulating tumor cells (CTCs) in disease diagnosis, prognosis, monitoring of the therapeutic efficacy, and clinical decision making is immense and has attracted tremendous focus in the last decade. We designed and fabricated simple, flat channel microfluidic devices polydimethylsiloxane (PDMS based) functionalized with locked nucleic acid (LNA) modified aptamers (targeting epithelial cell adhesion molecule (EpCAM) and nucleolin expression) for quick and efficient capture of CTCs and cancer cells. With optimized flow rates (10 μl/min), it was revealed that the aptamer modified devices offered reusability for up to six times while retaining optimal capture efficiency (>90%) and specificity. High capture sensitivity (92%) and specificity (100%) was observed in whole blood samples spiked with Caco-2 cells (10-100 cells/ml). Analysis of blood samples obtained from 25 head and neck cancer patients on the EpCAM LNA aptamer functionalized chip revealed that an average count of 5 ± 3 CTCs/ml of blood were captured from 22/25 samples (88%). EpCAM intracellular domain (EpICD) immunohistochemistry on 9 oral squamous cell carcinomas showed the EpICD positivity in the tumor cells, confirming the EpCAM expression in CTCs from head and neck cancers. These microfluidic devices also maintained viability for in vitro culture and characterization. Use of LNA modified aptamers provided added benefits in terms of cost effectiveness due to increased reusability and sustainability of the devices. Our results present a robust, quick, and efficient CTC capture platform with the use of simple PDMS based devices that are easy to fabricate at low cost and have an immense potential in cancer diagnosis, prognosis, and therapeutic planning.

Classification of team sport activities using a single wearable tracking device

Wearable tracking devices incorporating accelerometers and gyroscopes are increasingly being used for activity analysis in sports. However, minimal research exists relating to their ability to classify common activities. The purpose of this study was to determine whether data obtained from a single wearable tracking device can be used to classify team sport-related activities. Seventy-six non-elite sporting participants were tested during a simulated team sport circuit (involving stationary, walking, jogging, running, changing direction, counter-movement jumping, jumping for distance and tackling activities) in a laboratory setting. A MinimaxX S4 wearable tracking device was worn below the neck, in-line and dorsal to the first to fifth thoracic vertebrae of the spine, with tri-axial accelerometer and gyroscope data collected at 100Hz. Multiple time domain, frequency domain and custom features were extracted from each sensor using 0.5, 1.0, and 1.5s movement capture durations. Features were further screened using a combination of ANOVA and Lasso methods. Relevant features were used to classify the eight activities performed using the Random Forest (RF), Support Vector Machine (SVM) and Logistic Model Tree (LMT) algorithms. The LMT (79-92% classification accuracy) outperformed RF (32-43%) and SVM algorithms (27-40%), obtaining strongest performance using the full model (accelerometer and gyroscope inputs). Processing time can be reduced through feature selection methods (range 1.5-30.2%), however a trade-off exists between classification accuracy and processing time. Movement capture duration also had little impact on classification accuracy or processing time. In sporting scenarios where wearable tracking devices are employed, it is both possible and feasible to accurately classify team sport-related activities.

Qualitative assessment of bubble behaviour for central and asymmetric injection in 2D gas-solid fluidized bed using image analysis technique and CFD modelling

Bubble characteristics such as shape, size, and trajectory control the hydrodynamics and therefore heat transfer in fluidized bed reactors. Thus understanding these characteristics is very important for the design and scaleup of fluidized beds. An earlier developed Eulerian-Eulerian two-fluid model for simulating dense gas–solid two-phase flow has been used to compare the experimental data in a pseudo-two-dimensional (2-D) bed. Bubbles are injected asymmetrically by locating the nozzle at proximity to the wall, thus presenting the effect wall has on asymmetrical injection as compared to symmetrical injection. In this work, a digital image analysis technique was developed to study the bubble behaviour in a two-dimensional bubbling bed. The high-speed photography reveals an asymmetric wake formation during detachment indicating an early onset of mixing process. The wall forces acts tangentially on thebubble and has a significant impact on the bubble shape, neck formation during detachment and its trajectory through the bed. Larger bubbles drifting away from the centre with longer paths are observed. This qualitative behaviour is well predicted by CFD modelling. Asymmetric injection can significantly influence the heat and mass transfer characteristics.

Depression as a risk factor for fracture in women: a 10 year longitudinal study

BACKGROUND: Previous research has demonstrated deficits in bone mineral density (BMD) among individuals with depression. While reduced BMD is a known risk for fracture, a direct link between depression and fracture risk is yet to be confirmed. METHODS: A population-based sample of women participating in the Geelong Osteoporosis Study was studied using both nested case-control and retrospective cohort study designs. A lifetime history of depression was identified using a semi-structured clinical interview (SCID-I/NP). Incident fractures were identified from radiological reports and BMD was measured at the femoral neck using dual energy absorptiometry. Anthropometry was measured and information on medication use and lifestyle factors was obtained via questionnaire. RESULTS: Among 179 cases with incident fracture and 914 controls, depression was associated with increased odds of fracture (adjusted odds ratio (OR) 1.57, 95%CI 1.04-2.38); further adjustment for psychotropic medication use appeared to attenuate this association (adjusted OR 1.52, 95%CI 0.98-2.36). Among 165 women with a history of depression at baseline and 693 who had no history of depression, depression was associated with a 68% increased risk of incident fracture (adjusted hazard ratio (HR) 1.68, 95%CI 1.02-2.76), with further adjustment for psychotropic medication use also appearing to attenuate this association (adjusted HR 1.58, 95%CI 0.95-2.61). LIMITATIONS: Potential limitations include recall bias, unrecognised confounding and generalizability. CONCLUSIONS: This study provides both cross-sectional and longitudinal evidence to suggest that clinical depression is a risk factor for radiologically-confirmed incident fracture, independent of a number of known risk factors. If there is indeed a clinically meaningful co-morbidity between mental and bone health, potentially worsened by psychotropic medications, the issue of screening at-risk populations needs to become a priority.

Effects of antidepressants on postmenopausal bone loss - a 5-year longitudinal study from the OSTPRE cohort

BACKGROUND: Osteoporosis and depression are major health problems worldwide. The association between antidepressants, a treatment for depression, and bone health needs more detailed exploration. OBJECTIVE: The present study investigates antidepressant medication use and postmenopausal bone loss over time. METHODS: A total of 1988 women (aged 57-67) participating in the Kuopio Osteoporosis Risk Factor and Prevention Study (OSTPRE) cohort responded to a postal enquiry and had their femoral neck bone mineral density (BMD) measured in 1999 and again in 2004. Data on antidepressant use was obtained from the National Prescription Register. Multiple regression techniques were used to test the associations, before and after adjustment for anthropometric, medical, physical and lifestyle factors. RESULTS: Over the five years of follow-up, 319 (16.0%) women purchased antidepressants. Mean baseline femoral neck BMD for the entire study group was 881mg/cm(2) (SD 123) and mean 5-year bone loss was 6.0mg/cm(2) (SD 4.7). After adjustments, users of tricyclic antidepressants (TCA) had greater annual BMD loss than non-users (-3.6mg/cm(2) vs. -1.1mg/cm(2); P=0.031). Accelerated bone loss was also associated with selective serotonin reuptake inhibitor's (SSRI) use (P=0.001) and use of other antidepressants in a dose-response way, with the latter only among women of low-weight and normal-weight women who had lost weight over the study period. CONCLUSIONS: In conclusion, the use of SSRIs seems to accelerate postmenopausal bone loss in a dose-response manner. Associations between TCA and other antidepressant use and bone loss may also exist. Thus, the possibility of increased risk of osteoporosis should be considered when prescribing antidepressants for postmenopausal women.