Enhancement of ion dissociation in polyelectrolyte gels

High conductivity in single ion conducting polymer electrolytes is still the ultimate aim for many electrochemical devices such as secondary lithium batteries. Achieving effective ion dissociation in these cases remains a challenge since the active ion tends to remain in close proximity to the backbone charge as a result of a low degree of ion dissociation. A unique aspect of this dissociation problem in polyelectrolytes is the repulsion between the backbone charges created by dissociation. One way of enhancing ion dissociation in polyelectrolyte systems is to use copolymers in which only a fraction (<20%) of the mer units are charged and where the comonomer is itself chosen to be polar and preferably to be compatible with potential solvents. We have also found that certain dissociation enhancers based on ionic liquids or boroxine ring compounds can lead to high ionic conductivity. In the cases where an ionic liquid is used as the solvent in a polyelectrolyte gel, the viscosity of the ionic liquid and its hydrophilicity are critical to achieving high conductivity. Compounds based on the dicyanamide anion appear to be very effective ionic solvents; polyelectrolyte gels incorporating such ionic liquids exhibit conductivities as high as 10⁻² S/cm at room temperature. In the case of boroxine ring dissociation enhancers, gels based on poly(lithium-2-acrylamido-2-methyl-1-propanesulfonate) and ethylene carbonate produce conductivities approaching 10⁻³ S/cm. This paper will discuss these approaches for achieving higher conductivity in polyelectrolyte materials and suggest future directions to ensure single ion transport.

Ionic liquids in electrochemical devices and processes : managing interfacial electrochemistry

Many ionic liquids offer a range of properties that make them attractive to the field of electrochemistry; indeed it was electrochemical research and applications that ushered in the modern era of interest in ionic liquids. In parallel with this, a variety of electrochemical devices including solar cells, high energy density batteries, fuel cells, and supercapacitors have become of intense interest as part of various proposed solutions to improve sustainability of energy supply in our societies. Much of our work over the last ten years has been motivated by such applications. Here we summarize the role of ionic liquids in these devices and the insights that the research provides for the broader field of interest of these fascinating liquids.

Zwitterionic additives for electrochemical devices

Zwitterionic electrolytes such as N-methyl-N-(n-butanesulfonate) pyrrolidinium are added to electrolyte compositions such as polyelectrolytes, ionic liquid electrolytes and molecular solvent electrolytes (for example, lithium hexafluorophosphate) to improve conductivity of the ion species, such as lithium, in the electrolyte. This has application to lithium based energy storage devices such as batteries and supercapacitors.

Gel electrolytes based on lithium macro-anion salt

Montmorillonites are composed of aluminosilicate layers stacked one above the other, and the layer thickness is approximately 1 nm. In this work lithium modified montmorillonite (Li-MMT) was prepared and used as a lithium macro-anion salt in gel electrolytes. It was found that Li-MMT exhibited good compatibility with poly(ethylene glycol), DMSO and the ionic liquid, 1-ethyl-3-methylimidazolium dicyanamide (EMIdca), and a few of novel gel electrolytes based on Li-MMT were obtained. These gel electrolytes were investigated by X-ray powder diffraction, solid state NMR, conductivity measurements and cyclic voltammetry. High conductivities up to 10^{− 4} to 10^{− 3} S/cm at room temperature were observed with these macro-anion gel electrolytes. These gel materials were promising to be used as lithium conductive electrolytes in electrochemical devices, such as lithium batteries.

Nanoelectrodes : energy conversion and storage

Nanosized materials are known to take on peculiar properties compared to the bulk material. Their electronic and mechanical properties are known to improve e.g. higher electrical conductivity and greater strength. Their electrochemical redox properties can change dramatically, e.g. in the case of Ag°, the E° value for Ag° → Ag+ + e can change by up to half a volt as the particle size decreases. Nanodimensional materials also have an extraordinarily high surface area to volume ratio. All of these properties would bring beneficial effects if they could be retained when the material is assembled into a structure capable of being used as an electrode – nanostructured electrodes.

Here we consider selected examples illustrating the importance of nanostructured electrodes in energy conversion (organic solar cells and fuel cells) and storage (batteries and capacitors). These examples involve the use of inorganic as well as organic conducting and semiconducting materials.

High rates of oxygen reduction over a vapor phase-polymerized PEDOT electrode

The air electrode, which reduces oxygen (O₂), is a critical component in energy generation and storage applications such as fuel cells and metal/air batteries. The highest current densities are achieved with platinum (Pt), but in addition to its cost and scarcity, Pt particles in composite electrodes tend to be inactivated by contact with carbon monoxide (CO) or by agglomeration. We describe an air electrode based on a porous material coated with poly(3,4-ethylenedioxythiophene) (PEDOT), which acts as an O₂ reduction catalyst. Continuous operation for 1500 hours was demonstrated without material degradation or deterioration in performance. O₂ conversion rates were comparable with those of Pt-catalyzed electrodes of the same geometry, and the electrode was not sensitive to CO. Operation was demonstrated as an air electrode and as a dissolved O₂ electrode in aqueous solution.

On the role of cyclic unsaturated additives on the behaviour of lithium metal electrodes in ionic liquid electrolytes

Three cyclic vinyl based additives, based respectively on oxygen, sulphur and fluorine, are tested for their ability to improve the cycling of lithium in a hostile ionic liquid medium. Oxygen based vinylene carbonate is found to offer the best protection of the lithium metal whilst allowing very consistent lithium cycling to occur. The vinylene carbonate based system under study is, however, imperfect. Lithium metal is deposited in a dendritic morphology, and vinylene carbonate is rapidly consumed during lithium cycling if it is present in a small quantity. Our results suggest that ionic liquid systems critically relying on a small amount of additive to protect a lithium electrode are not viable for long cycle life secondary batteries. It is suggested that an ionic liquid which itself is lithium metal compatible be used instead.

Organic ionic plastic crystals : recent advances

Investigations into the synthesis and utilisation of organic ionic plastic crystals have made significant progress in recent years, driven by a continued need for high conductivity solid state electrolytes for a range of electrochemical devices. There are a number of different aspects to research in this area; fundamental studies, utilising a wide range of analytical techniques, of both pure and doped plastic crystals, and the development of plastic crystal-based materials as electrolytes in, for example, lithium ion batteries. Progress in these areas is highlighted and the development of new organic ionic plastic crystals, including a new class of proton conductors, is discussed.

ZWITTERIONIC ADDITIVES FOR ELECTROCHEMICAL DEVICES

Zwitterionic electrolytes such as N-methyl-N-(n-butanesulfonate) pyrrolidinium are added to electrolyte compositions such as polyelectrolytes, ionic liquid electrolytes and molecular solvent electrolytes (for example, lithium hexafluorophosphate) to improve conductivity of the ion species, such as lithium, in the electrolyte. This has application to lithium based energy storage devices such as batteries and supercapacitors.

Anodising AA5083 aluminium alloy using ionic liquids

Aluminium, as the current collector in lithium batteries, has shown reduced corrosion susceptibility in room temperature molten salts (1, 2). Moreover, previous studies have established that corrosion mitigation is achieved on magnesium alloys using ionic liquids pretreatments (3, 4). This paper investigated the anodisation of AA5083 aluminium alloy in Trihexyl(tetradecyl)phosphonium bis(trifluoromethylsulfony) ([P6,6,6,14][NTf2]) ionic liquid by applying a constant current followed by holding at the maximum potential for a period of time. Potentiodynamic polarisation results show that the treated surfaces were more corrosion resistant in 0.1 M sodium chloride solution compared with the control specimen. The anodising treatment was effective both in shifting the free corrosion potential to more noble values and in suppressing the corrosion current. Optical microscope and optical profilometry images indicated that an anodising film was deposited onto the alloy surface, which is thought to have inhibited corrosion in chloride environment. Further characterisation of the anodising film will be carried out in future work.

Ionic liquids and organic ionic plastic crystals utilizing small phosphonium cations

The development of new liquid and solid state electrolytes is paramount for the advancement of electrochemical devices such as lithium batteries and solar cells. Ionic liquids have shown great promise in both these applications. Here we demonstrate the use of phosphonium cations with small alkyl chain substituents, in combination with a range of different anions, to produce a variety of new halide free ionic liquids that are fluid, conductive and with sufficient thermal stability for a range of electrochemical applications. Walden plot analysis of the new phosphonium ionic liquids shows that these can be classed as "good" ionic liquids, with low degrees of ion pairing and/or aggregation, and the lithium deposition and stripping from one of these ionic liquids has been demonstrated. Furthermore, for the first time phosphonium cations have been used to form a range of organic ionic plastic crystals. These materials can show significant ionic conductivity in the solid state and thus are of great interest as potential solid-state electrolyte materials.

Injection, detection and repair of aesthetics in home movies

This paper details the design of an algorithm for automatically manipulating the important aesthetic element of video, visual tempo. Automatic injection, detection and repair of such aesthetic elements, it is argued, is vital to the next generation of amateur multimedia authoring tools. We evaluate the performance of the algorithm on a battery of synthetic data and demonstrate its ability to return the visual tempo of the final media a considerable degree closer to the target signal. The novelty of this work lies chiefly in the systematic manipulation of this high level aesthetic element of video.

Nanorods of vanadium compounds: synthesis, characterisation, and application in electrochemical energy storage

The synthesis and characterisation of nanorods of vanadium pentoxide, V(2)O(5), vanadium trioxide, V(2)O(3), vanadium dioxide, VO(2)(B), and vanadium nitride, VN, are presented, and their application in electrochemical supercapacitors and lithium-ion batteries is outlined. Specifically, a novel method for the preparation of V(2)O(5) nanorods is discussed. It involves ball milling as a first step and controlled annealing as a second step. Nanorods of V(2)O(5) can be converted into those of other vanadium-related phases by simple chemical reduction treatments. Such chemical transformations are pseudomorphic and often topotactic, that is, the resulting nanorods belong to a different chemical phase but tend to retain the original morphology and preferential crystal orientation dictated by parent V(2)O(5) crystals.

The corresponding properties of nanorods for their prospective application in electrochemical energy storage (lithium-ion batteries and electrochemical supercapacitors) are discussed. The synthesised V(2)O(5) nanorods possess a stable cyclic behaviour when they are used in a cathode of a lithium-ion battery and are suitable for use in an anode. VN nanorods synthesised by NH(3) reduction of V(2)O(5) were found to possess pseudocapacitive properties in aqueous electrolytes.

Oxygen reduction reaction activity of La-based perovskite oxides in alkaline medium : a thin-film rotating ring-disk electrode study

In this work, LaMO₃ and LaNi_0.5M_0.5O₃ (M = Ni, Co, Fe, Mn and Cr) perovskite oxide electrocatalysts were synthesized by a combined ethylenediaminetetraacetic acid-citrate complexation technique and subsequent calcinations at 1000 °C in air. Their powder X-ray diffraction patterns demonstrate the formation of a specific crystalline structure for each composition. The catalytic property of these materials toward the oxygen reduction reaction (ORR) was studied in alkaline potassium hydroxide solution using the rotating disk and rotating ring-disk electrode techniques. Carbon is considered to be a crucial additive component because its addition into perovskite oxide leads to optimized ORR current density. For LaMO₃ (M = Ni, Co, Fe, Mn and Cr)), in terms of the ORR current densities, the performance is enhanced in the order of LaCrO₃, LaFeO₃, LaNiO₃, LaMnO₃, and LaCoO3. For LaNi_0.5M_0.5O₃, the ORR current performance is enhanced in the order of LaNi_0.5Fe_0.5O₃, LaNi_0.5Co_0.5O₃, LaNi_0.5Cr_0.5O₃, and LaNi_0.5Mn_0.5O₃. Overall, LaCoO₃ demonstrates the best performance. Most notably, substituting half of the nickel with cobalt, iron, manganese, or chromium translates the ORR to a more positive onset potential, suggesting the beneficial catalytic effect of two transition metal cations with Mn as the most promising candidate. Koutecky–Levich analysis on the ORR current densities of all compositions indicates that the four-electron pathway is favored on these oxides, which are consistent with hydroperoxide ion formation of <2%.