The role of peer support in facilitating psychosocial adjustment to chronic illness in adolescence

This article describes a Chronic Illness Peer Support (ChIPS) programme designed to assist young people in their adjustment to life with a chronic medical condition. The ChIPS programme takes a non-categorical approach to participation, recognizing that young people with different medical conditions experience many similar concerns. Support groups are facilitated by a health professional and peer co-leader. Groups meet weekly for 8 weeks and typically include between six and eight young people. Young people can choose to remain involved in broader social, educational and recreational activities following completion of the 8-week programme. We discuss nine psychosocial mechanisms by which peer support groups such as ChIPS might act to improve resilience and well-being among participants. We also discuss some theoretical risks in running support groups for chronically ill young people, which emphasize the importance of training and support of group leaders, including the peer co-leaders. The article concludes with a personal testimony by a ChIPS participant that was prepared for the 2003 Australian and New Zealand Adolescent Health Conference.

Chemiluminescence detection of opium poppy (papaver somniferum) alkaloids

A review with 98 references. The determination of the opium poppy (Papaver somniferum) alkaloids and their semi-synthetic derivatives has important applications in industrial process monitoring, clinical analysis and forensic science. Liquid-phase chemiluminescence reagents such as tris(2,2′-bipyridyl)ruthenium(II) and acidic potassium permanganate exhibit remarkable sensitivity and complementary selectivity for many P. somniferum alkaloids, which has been exploited in the development of a range of analytical procedures using flow analysis, high-performance liquid chromatography, capillary electrophoresis and microfluidic instrumentation.

Covalent immobilization of naringinase for the transformation of a flavonoid

Naringinase (EC 3.2.1.40) from Penicillium sp was immobilized by covalent binding to woodchips to improve its catalytic activity. The immobilization of naringinase on glutaraldehyde-coated woodchips (600 mg woodchips, 10 U naringinase, 45 °C, pH 4.0 and 12h) through 1% glutaraldehyde cross-linking was optimized. The pH-activity curve of the immobilized enzyme shifted toward a lower pH compared with that of the soluble enzyme. The immobilization caused a marked increase in thermal stability of the enzyme. The immobilized naringinase was stable during storage at 4 °C. No loss of activity was observed when the immobilized enzyme was used for seven consecutive cycles of operations. The efficiency of immobilization was 120%, while soluble naringinase afforded 82% efficacy for the hydrolysis of standard naringin under optimal conditions. Its applicability for debittering kinnow mandarin juice afforded 76% debittering efficiency. 

Computational thermal analysis of a continuous flow micro Polymerase Chain Reaction (PCR) chip

The first continuous flow micro PCR introduced in 1998 has attracted considerable attention for the past several years because of its ability to amplify DNA at much faster rate than the conventional PCR and micro chamber PCR method. The amplification is obtained by moving the sample through 3 different fixed temperature zones. In this paper, the thermal behavior of a continuous flow PCR chip is studied using commercially available finite element software. We study the temperature uniformity and temperature gradient on the chip’s top surface, the cover plate and the interface of the two layers. The material for the chip body and cover plate is glass. The duration for the PCR chip to achieve equilibrium temperature is also studied.

Solid state recycling of 5083 Al alloy by hot extrusion

The machined chips of 5083 Al alloy were recycled by hot extrusion at 723 K with an extrusion ratio of 44:1 in air. Corrosion and mechanical properties of the recycled specimens have been compared with those of a virgin extrusion which was processed from the ingot block. As a result of salt immersion tests, mass loss of the recycled specimen was not less than twice of that of the virgin extrusion. The deterioration in corrosion properties for the recycled specimen was attributed to the excessive contamination of Fe which promoted galvanic corrosion. As a result of tensile tests, the recycled specimen exhibited a good combination of high strength and high elongation to failure at room temperature. The excellent mechanical properties for the recycled specimen were attributed to the refined microstructure. However, the elongation to failure of the recycled specimen at elevated temperatures more than 573 K was lower than that of the virgin extrusion. The contamination of oxide particles is likely to be responsible for the lower elongation in the solid recycled specimen.

Particle trapping using dielectrophoretically patterned carbon nanotubes

This study presents the dielectrophoretic (DEP) assembly of multi-walled carbon nanotubes (MWCNTs) between curved microelectrodes for the purpose of trapping polystyrene microparticles within a microfluidic system. Under normal conditions, polystyrene particles exhibit negative DEP behaviour and are repelled from microelectrodes. Interestingly, the addition of MWCNTs to the system alters this situation in two ways: first, they coat the surface of particles and change their dielectric properties to exhibit positive DEP behaviour; second, the assembled MWCNTs are highly conductive and after the deposition serve as extensions to the microelectrodes. They establish an array of nanoelectrodes that initiates from the edge of microelectrodes and grow along the electric field lines. These nanoelectrodes can effectively trap the MWCNT-coated particles, since they cover a large portion of the microchannel bottom surface and also create a much stronger electric field than the primary microelectrodes as confirmed by our numerical simulations. We will show that the presence of MWCNT significantly changes performance of the system, which is investigated by trapping sample polystyrene particles with plain, COOH and goat anti-mouse IgG surfaces.

A microfluidics device to monitor platelet aggregation dynamics in response to strain rate micro-gradients in flowing blood

This paper reports the development of a platform technology for measuring platelet function and aggregation based on localized strain rate micro-gradients. Recent experimental findings within our laboratories have identified a key role for strain rate micro-gradients in focally triggering initial recruitment and subsequent aggregation of discoid platelets at sites of blood vessel injury. We present the design justification, hydrodynamic characterization and experimental validation of a microfluidic device incorporating contraction–expansion geometries that generate strain rate conditions mimicking the effects of pathological changes in blood vessel geometry. Blood perfusion through this device supports our published findings of both in vivo and in vitro platelet aggregation and confirms a critical requirement for the coupling of blood flow acceleration to downstream deceleration for the initiation and stabilization of platelet aggregation, in the absence of soluble platelet agonists. The microfluidics platform presented will facilitate the detailed analysis of the effects of hemodynamic parameters on the rate and extent of platelet aggregation and will be a useful tool to elucidate the hemodynamic and platelet mechano-transduction mechanisms, underlying this shear-dependent process.

Characterization of high fluid strain micro contractions to study the stress on biological fluids

Microfluidics has the potential to enhance the understanding of the biological fluids under strain, due to the laminar nature of the fluid and the possibility to mimic the real conditions. We present advances on charaterization of a microfluidic platform to study high strain rate flows in the transport of biological fluids. These advances are improvements on the reproduction of a  constant extensional strain rate using micro contractions and development of 3D numerical models. The micro geometries have been fabricated in polydimethyl siloxame (PDMS) using standard soft-lithography techniques with a photolithographically patterned mold. A comparison of some microcontractions with different funnel characteristics is presented. The Micro Particle Image Velocimetry technique has been applied to validate the numerical simulations. We demonstrate the use of microfluidics in the reproduction of a large range of controllable extensional strains that can be used in the study of the effect of flow on biological fluids.

Hydrodynamic flow focusing to study the isolated effects of the flow components

Biological fluids such as blood, proteins and DNA solutiosn moving within fluidic channels can potentially be exposed to high level of shear, extension or mixed stress, either in vitro such as industrial processing of blood products or in vivo such as ocurrs in some pathological conditions. This exposure to a high level of strain can trigger some reactions. In most of the cases the nature of the flow is mixed with shear and extensional components. The ability ot isolate the effects of each component is critical in order to understand the mechanisms behind the reactions and potentially prevent them. Applying hydrodynamic flow focusing, we present in this investigation the characterization of microchannels that allow study of the regions of high shear or high extension strain rate. Micro channels were fabricated in polydimethyl siloxane (PDMS)  using standard soft-lithography techniques with a photolithographically patterned mold. Characterization of the regions with high shear and high extension strain rate is presented. Computational Fluid Dynamics (CFD) simulations in three dimensions have been carried out to gain more detailed local flow information, and the results have been validated experimentally. A comparison between the numerical models and experiment and is presented. The advantages of microfluidic flow focusing in the study  of the effects of shear and extension strain rates for biological fluids are outlined.

Lab-on-a-chip : a component view

Miniaturization is being increasingly applied to biological and chemical analysis processes. Lab-on-a-chip systems are direct creation of the advancement in the miniaturization of these processes. They offer a host of exciting applications in several areas including clinical diagnostics, food and environmental analysis, and drug discovery and delivery studies. This paper reviews lab-on-a-chip systems from their components perspective. It provides a categorization of the standard functional components found in lab-on-a-chip devices together with an overview of the latest trends and developments related to lab-on-a-chip technologies and their application in nanobiotechnology. The functional components include: injector, transporter, preparator, mixer, reactor, separator, detector, controller, and power supply. The components are represented by appropriate symbols allowing designers to present their lab-on-a-chip products in a standard manner. Definition and role of each functional component are included and complemented with examples of existing work. Through the approach presented in this paper, it is hoped that modularity and technology transfer in lab-on-a-chip systems can be further facilitated and their application in nanobiotechnology be expanded.

Dielectrophoretically assembled particles : feasibility for optofluidic systems

This work presents the dielectrophoretic manipulation of sub-micron particles suspended in water and the investigation of their optical responses using a microfluidic system. The particles are made of silica and have different diameters of 600, 450, and 250 nm. Experiments show a very interesting feature of the curved microelectrodes, in which the particles are pushed toward or away from the microchannel centerline depending on their levitation heights, which is further analyzed by numerical simulations. In doing so, applying an AC signal of 12 V_p-p and 5 MHz across the microelectrodes along with a flow rate of 1 μl/min within the microchannel leads to the formation of a tunable band of particles along the centerline. Experiments show that the 250 nm particles guide the longitudinal light along the microchannel due to their small scattering. This arrangement is employed to study the feasibility of developing an optofluidic system, which can be potentially used for the formation of particles-core/liquid-cladding optical waveguides.

Dielectrophoretically patterned carbon nanotubes to sort microparticles

This article compares the operation of a dielectrophoretic (DEP) platform before and after pattering carbon nanotubes (CNTs) between its microelectrodes. The diverse performance of the DEP system is assessed by separating 1 and 5 μm polystyrene particles. In the absence of CNTs, both particles can only be trapped by operating the system at low medium conductivities, (<10^-3 S/m) and frequencies (<75 kHz). Alternatively, applying CNTs to the system, some CNTs coat the surface of particles and increase their overall conductivity and permittivity, whereas the rest of them are patterned between the microelectrodes and induce strong DEP forces at their free ends, which can effectively trap the coated particles. The first development extends the range of medium conductivities and frequencies at which the trapping of both particles is achievable, whereas the second development facilitates the selective deposition of particles along the surface of curved microelectrodes. Setting the medium conductivity to 2×10^-3 S/m and the frequency to 20 MHz, most of 5 μm particles are trapped at the entry region of the first microelectrode pair, whereas most of 1 μm particles are trapped at the tips, and this distinction facilitates their separation. The trapping of 1 μm particles can be improved by decreasing the frequency to 1.5 MHz. This study demonstrates how the integration of CNTs into microfluidic systems enables them to operate beyond their capabilities.

Dielectrophoretically tuneable optical waveguides using nanoparticles in microfluidics

We present a tuneable optical waveguide using dielectrophoretically controlled nanoparticles in microfluidics. Silicon dioxide nanoparticles of different sizes in de-ionized water are channelled through a microfluidic system. An array of microelectrodes generates the dielectrophoretic force to funnel nanoparticles, forming narrowbands at the center of the microfluidics at different applied voltages and frequencies. It is observed that these narrowbands either scatter or guide the coupled light under selected conditions. The realization of such a system offers exciting possibilities for the development of a new class of optofluidics, which are tuned by the positioning of nanoparticles on demand.

Size based separation of microparticles using a dielectrophoretic activated system

This work describes the separation of polystyrene microparticles suspended in deionized (DI) water according to their dimensions using a dielectrophoretic (DEP) system. The DEP system utilizes curved microelectrodes integrated into a microfluidic system. Microparticles of 1, 6, and 15 μm are applied to the system and their response to the DEP field is studied at different frequencies of 100, 200, and 20 MHz. The microelectrodes act as a DEP barrier for 15 μm particles and retain them at all frequencies whereas the response of 1 and 6 μm particles depend strongly on the applied frequency. At 100 kHz, both particles are trapped by the microelectrodes. However, at 200 kHz, the 1 μm particles are trapped by the microelectrodes while the 6 μm particles are pushed toward the sidewalls. Finally, at 20 MHz, both particles are pushed toward the sidewalls. The experiments show the tunable performance of the system to sort the microparticles of various dimensions in microfluidic systems.

Novel dielectrophoretic platforms for manipulation and separation of particles

This research presents the development of a microfluidic system which takes advantage of dielectrophoresis to manipulate particles. The system utilises curved microelectrodes to create strong dielectrophoretic forces within the microchannel, and exploits a novel operating strategy by patterning carbon nanotubes between the microelectrodes to trap low-conductive particles.