The influence of maternal mental health, attachment and hormonal factors on a mother’s attachment to her fetus during pregnancy

 The thesis investigated the role of maternal mental health, maternal attachment and hormones in the development of maternal-fetal attachment during pregnancy. The study found that oxytocin and cortisol were associated with maternal-fetal attachment throughout pregnancy. The study also found that maternal mental health, particularly anxiety, stress and depression during the prenatal period impacted on the development of maternal-fetal attachment across pregnancy. The findings have clinical and research implications with regard to early intervention for attachment and maternal well-being.

Hormonal regulation of platypus Beta-lactoglobulin and monotreme lactation protein genes

Endocrine regulation of milk protein gene expression in marsupials and eutherians is well studied. However, the evolution of this complex regulation that began with monotremes is unknown. Monotremes represent the oldest lineage of extant mammals and the endocrine regulation of lactation in these mammals has not been investigated. Here we characterised the proximal promoter and hormonal regulation of two platypus milk protein genes, Beta-lactoglobulin (BLG), a whey protein and monotreme lactation protein (MLP), a monotreme specific milk protein, using in vitro reporter assays and a bovine mammary epithelial cell line (BME-UV1). Insulin and dexamethasone alone provided partial induction of MLP, while the combination of insulin, dexamethasone and prolactin was required for maximal induction. Partial induction of BLG was achieved by insulin, dexamethasone and prolactin alone, with maximal induction using all three hormones. Platypus MLP and BLG core promoter regions comprised transcription factor binding sites (e.g. STAT5, NF-1 and C/EBPα) that were conserved in marsupial and eutherian lineages that regulate caseins and whey protein gene expression. Our analysis suggests that insulin, dexamethasone and/or prolactin alone can regulate the platypus MLP and BLG gene expression, unlike those of therian lineage. The induction of platypus milk protein genes by lactogenic hormones suggests they originated before the divergence of marsupial and eutherians.

Strain gradient plasticity modelling of high-pressure torsion

Gradient plasticity modelling combining a micro-structure-related constitutive description of the local material behaviour with a particular gradient plasticity frame is presented. The constitutive formulation is based on a phase mixture model in which the dislocation cell walls and the cell interiors are considered as separate 'phases', the respective dislocation densities entering as internal variables. Two distinct physical mechanisms, which give rise to gradient plasticity, are considered. The first one is associated with the occurrence of geometrically necessary dislocations leading to first-order strain gradients; the second one is associated with the reaction stresses due to plastic strain incompatibilities between neighbouring grains, which lead to second-order strain gradients. These two separate variants of gradient plasticity were applied to the case of high-pressure torsion: a process known to result in a fairly uniform, ultrafine grained structure of metals. It is shown that the two complementary variants of gradient plasticity can both account for the experimental results, thus resolving a controversial issue of the occurrence of a uniform micro-structure as a result of an inherently non-uniform process. © 2007 Elsevier Ltd. All rights reserved.

Anodal transcranial direct current stimulation of the motor cortex increases cortical voluntary activation and neural plasticity

INTRODUCTION: We examined the cumulative effect of 4 consecutive bouts of non-invasive brain stimulation on corticospinal plasticity and motor performance, and whether these responses were influenced by the brain-derived neurotrophic factor (BDNF) polymorphism.

METHODS: In a randomized double-blinded cross-over design, changes in strength and indices of corticospinal plasticity were analyzed in 14 adults who were exposed to 4 consecutive sessions of anodal and sham transcranial direct current stimulation (tDCS). Participants also undertook a blood sample for BDNF genotyping (N=13).

RESULTS: We observed a significant increase in isometric wrist flexor strength with transcranial magnetic stimulation revealing increased corticospinal excitability, decreased silent period duration, and increased cortical voluntary activation compared to sham tDCS.

DISCUSSION: The results show that 4 consecutive sessions of anodal tDCS increased cortical voluntary activation manifested as an improvement in strength. Induction of corticospinal plasticity appears to be influenced by the BDNF polymorphism.

The influence of fine ferrite formation on the γ/α interface, fine bainite and retained austenite in a thermomechanically-processed transformation induced plasticity steel

An Fe-0.26C-1.96Si-2Mn with 0.31Mo (wt%) steel was subjected to a novel thermomechanical processing route to produce fine ferrite with different volume fractions, bainite, and retained austenite. Two types of fine ferrites were found to be: (i) formed along prior austenite grain boundaries, and (ii) formed intragranularly in the interior of austenite grains. An increase in the volume fraction of fine ferrite led to the preferential formation of blocky retained austenite with low stability, and to a decrease in the volume fraction of bainite with stable layers of retained austenite. The difference in the morphology of the bainitic ferrite and the retained austenite after different isothermal ferrite times was found to be responsible for the deterioration of the mechanical properties. The segregation of Mn, Mo, and C at distances of 2-2.5 nm from the ferrite and retained austenite/martensite interface on the retained austenite/martensite site was observed after 2700 s of isothermal hold. It was suggested that the segregation occurred during the austenite-to-ferrite transformation, and that this would decrease the interface mobility, which affects the austenite-to-ferrite transformation and ferrite grain size.

Equal-channel angular pressing and annealing of a twinning-induced plasticity steel : microstructure, texture, and mechanical properties

In this work, a high-manganese Fe-23Mn-1.5Al-0.3C Twinning-Induced Plasticity (TWIP) steel was subjected to plastic shear deformation using Equal-Channel Angular Pressing (ECAP) at 300 °C following route BC and additional annealing. The microstructure evolution during both deformation by ECAP and subsequent annealing was investigated and correlated with the mechanical properties. The successive grain refinement during ECAP was promoted by two parallel mechanisms, namely dislocation driven grain fragmentation and twin fragmentation, and accounted for the ultra-high strength. In addition, due to the relatively low volume fraction of deformation twins after ECAP at 300 °C, further contribution of deformation twinning during room temperature deformation allowed additional work-hardening capacity and elongation. During subsequent recovery annealing the ultra-fine grains and deformation twins were thermally stable, which supported retainment of the high yield strength along with regained uniform elongation. For the first time, the texture evolution during ECAP and during the following heat treatment was analyzed. After 1, 2, and 4 ECAP passes a transition texture with the characteristic texture components of both high- and low-SFE materials developed. During the following heat treatment the texture evolution proceeded similar to that observed in the same material after cold rolling. Retaining of the ECAP texture components due to oriented nucleation at grain boundaries and triple junctions as well as annealing twinning accounted for the formation of a weak, retained ECAP texture after recrystallization.

In situ synchrotron X-ray diffraction studies of the effect of microstructure on tensile behavior and retained austenite stability of thermo-mechanically processed transformation induced plasticity steel

Transmission electron microscopy and in situ synchrotron high-energy X-ray diffraction were used to investigate the martensitic transformation and lattice strains under uniaxial tensile loading of Fe-Mn-Si-C-Nb-Mo-Al Transformation Induced Plasticity (TRIP) steel subjected to different thermo-mechanical processing schedules. In contrast with most of the diffraction analysis of TRIP steels reported previously, the diffraction peaks from the martensite phase were separated from the peaks of the ferrite-bainite α-matrix. The volume fraction of retained γ-austenite, as well as the lattice strain, were determined from the diffraction patterns recorded during tensile deformation. Although significant austenite to martensite transformation starts around the macroscopic yield stress, some austenite grains had already experienced martensitic transformation. Hooke's Law was used to calculate the phase stress of each phase from their lattice strain. The ferrite-bainite α-matrix was observed to yield earlier than austenite and martensite. The discrepancy between integrated phase stresses and experimental macroscopic stress is about 300 MPa. A small increase in carbon concentration in retained austenite at the early stage of deformation was detected, but with further straining a continuous slight decrease in carbon content occurred, indicating that mechanical stability factors, such as grain size, morphology and orientation of the retained austenite, played an important role during the retained austenite to martensite transformation.

Initiation of plasticity by nanoindentation in Mg alloys

 In this study, nano-indentation technique is employed to investigate the initiation of basal slip and extension twin separately in magnesium. The present method prove useful in studying the influence of solid solution and precipitates on these two deformation modes.

Personality and individual differences in plasticity

In the last few years, investigators have documented individual differences in many different types of behavioral plasticity. Of particular interest are individual differences in the temporal plasticity of personality traits over extended (ontogenetic) periods of time, because of the relevance of these data to models of behavioral development. We discuss recent empirical studies of the temporal consistency of personality over ontogeny, and models that make contrasting predictions about individual differences in the developmental trajectories of behavioral traits. In addition, we consider recent advances in studies of relationships between personality traits and particular types of behavioral plasticity, including statistical methods which facilitate analyses of relationships between personality traits, contextual plasticity, temporal plasticity and intraindividual variability, and empirical tests of predicted relationships between personality traits and other types of behavioral plasticity (flexibility, learning rates). As the field of animal personality and behavioral plasticity moves from a largely descriptive to a predictive phase, we suggest that there is ample room for empirical tests of recent models that predict individual differences in behavioral developmental trajectories, and for the development of new formal models that make strong predictions about relationships between personality traits and specific types of behavioral plasticity.

Evolutionary history of a secondary terrestrial Australian diving beetle (Coleoptera, Dytiscidae) reveals a lineage of high morphological and ecological plasticity

The evolution of a secondary terrestrial lifestyle in diving beetles (Coleoptera: Dytiscidae) has never been analysed in a phylogenetic framework before. Here we study Terradessus caecus Watts, a terrestrial species of the subfamily Hydroporinae endemic to Australia. We infer its phylogenetic placement using Bayesian inference and maximum-likelihood methods based on a multilocus molecular dataset. We also investigate the divergence time estimates of this lineage using a Bayesian relaxed clock approach. Finally, we infer ancestral ecological preferences using a likelihood approach. We recover T. caecus nested in the genus Paroster Sharp with strong support. Therefore, we establish a synonymy for both species of Terradessus with Paroster: Paroster caecus (Watts) n.comb. and Paroster anophthalmus (Brancucci & Monteith) n.comb. Paroster is an endemic Australian genus that has a remarkable number of subterranean species in underground aquifers with highly derived morphologies. Our results highlight one of the most remarkable radiations of aquatic beetles with independent ecological pathways likely linked to palaeoclimatic disruptions in the Neogene. Paroster caecus (Watts) n.comb. originated from a mid-Miocene split following the onset of an aridification episode that has been ongoing to the present day. The deep changes in ecological communities in association with the drying-out of palaeodrainage systems might have pushed this lineage to colonize a new niche in terrestrial habitats.