Solvent-induced 7R-dioxygenase activity of soybean 15-lipoxygenase-1 in the formation of omega-3 DPA-derived resolvin analogs

The resolvin family contains important anti-inflammatory and pro-resolution compounds enzymatically derived in vivo from the polyunsaturated omega-3 fatty acids, eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA). More recently, docosapentaenoic acid (DPA) has emerged as another potentially important precursor in the biological production of resolvin compounds. In this work we have used medium engineering to develop a simple method for the controlled synthesis of two di-hydroxylated diastereomers of DPAn-3 catalyzed by soybean 15-lipoxygenase-1 (15-sLOX-1) in the presence of short chain n-alcohols, including methanol, ethanol and propan-1-ol. The complete structures of the two major products, 7S,17S-dihydroxydocosapenta-8Z,10E,13Z,15E,19Z-enoic acid (7S,17S-diHDPAn-3) and 7R,17S-dihydroxydocosapenta-8Z,10E,13Z,15E,19Z- enoic acid (7R,17S-diHDPAn-3), have been elucidated using spectroscopic analysis. The alcohol-dependent R-dioxygenase activity of soybean 15-lipoxygenase with mono-hydroperoxide intermediate substrates has also been demonstrated with other biologically relevant PUFAs, including DHA, EPA and ARA. The developed method has applications in the production of closely related isomers of naturally occurring resolvins and protectins, demonstrating the versatility of 15-sLOX-1 as a biocatalyst. © 2014 Elsevier B.V.

The formation of complex microstructures after different deformation modes in advanced high-strength steels

The microstructure of transformation induced plasticity (TRIP) and dual phase (DP) multiphase steels after stamping of an industrial component at different strain levels was investigated using transmission electron microscopy. The TRIP steel microstructure showed a more complex dislocation substructure of ferrite at different strain levels than DP steel. The deformation microstructure of the stamped parts was compared to the deformation microstructure in these complex steels for different "equivalent" tensile strains. It was found that the microstructures are similar only at high levels of strain (>10 pct) for both steels. © 2014 The Minerals, Metals & Materials Society and ASM International.

Influences on the formation of academics: the role of the doctorate and structured development opportunities

The paper examines influences of doctoral study and structured early career interventions on academic work. It uses evidence from a survey in six Australian universities (n=1158) to explore academics' engagement with research and teaching development. It regards universities as social situations that are ambiguous, presenting conflicting opportunities for growth and development and the pursuit of personal objectives. Academics' emphases on different aspects of academic work involve complex responses that are subject to many influences. It shows that doctoral work may avoid developing key skills that academics need and that the extent to which doctoral study prepares academics for different aspects of their role is different in different disciplines and institutions. It also shows that the conduct of academics in their major roles is little influenced by the training and development they engage in. The paper discusses the survey findings in terms of what constrains and what enables academics to take up particular development opportunities. It argues that to understand academic practice, analysis of how organisational influences are interpreted is needed.

Molecular dynamics modelling of diffusional formation of titanium carbide clusters in iron matrix

Molecular dynamics simulation was employed to study the atomic interactions in titanium carbides and iron matrix containing carbon and titanium, which are significant for understanding the formation of titanium carbide cluster during precipitate process. The atoms trajectory and diffusion coefficients of carbon in titanium carbide were analyzed to provide a vacancy-exchanging mechanism and clarify the carbon concentration dependence of carbon diffusion in titanium carbide. The dependence of the formation of titanium carbide cluster in iron matrix on carbon was determined from the study of atoms diffusivity, cluster formation and formation energy of titanium carbide cluster. The simulation results provided insight into the carbon diffusion process and improved the understanding of the formation of titanium carbide cluster.

Conditions favoring the formation of monomeric Pt(III) derivatives in the electrochemical oxidation of trans-[Pt(II){(p-BrC6F4)NCH2CH2NEt2}Cl(py)]

Characterization of the anticancer active compound trans-[Pt^II{(p-BrC6F4)NCH2CH2NEt2}Cl(py)] is described along with identification of electrochemical conditions that favor formation of a monomeric one-electron-oxidized Pt^III derivative. The square-planar organoamidoplatinum(II) compound was synthesized through a carbon dioxide elimination reaction. Structural characterization by using single-crystal X-Ray diffraction reveals a trans configuration with respect to donor atoms of like charges. As Pt^III intermediates have been implicated in the reactions of platinum anticancer agents, electrochemical conditions favoring the formation of one-electron-oxidized species were sought. Transient cyclic voltammetry at fast scan rates or steady-state rotating disc and microelectrode techniques in a range of molecular solvents and an ionic liquid confirm the existence of a well-defined, chemically and electrochemically reversible one-electron oxidation process that, under suitable conditions, generates a Pt^III complex, which is proposed to be monomeric [Pt^III{(p-BrC6F4)NCH2CH2NEt2}Cl(py)]⁺. Electron paramagnetic resonance spectra obtained from highly non-coordinating dichloromethane/([Bu4N][B(C6F5)4]) solutions, frozen to liquid nitrogen temperature immediately after bulk electrolysis in a glove box, support the Pt^III assignment rather than formation of a Pt^II cation radical. However, the voltammetric behavior is highly dependent on the timescale of the experiments, temperature, concentration of trans-[Pt^II{(p-BrC6F4)NCH2CH2NEt2}- Cl(py)], and the solvent/electrolyte. In the low-polarity solvent CH2Cl2 containing the very weakly coordinating electrolyte [Bu4N][B(C6F5)4], a well-defined reversible one-electron oxidation process is observed on relatively long timescales, which is consistent with the stabilization of the cationic platinum(III) complex in non-coordinating media. Bulk electrolysis of low concentrations of [Pt{(p-BrC6F4)NCH2CH2NEt2}Cl(py)] favors the formation of monomeric [Pt^III{(p-BrC6F4)NCH2CH2NEt2}Cl(py)]⁺. Simulations allow the reversible potential of the Pt^II/Pt^III process and the diffusion coefficient of [Pt^III{(p-BrC6F4)- NCH2CH2NEt2}Cl(py)]⁺ to be calculated. Reversible electrochemical behavior, giving rise to monomeric platinum(III) derivatives, is rare in the field of platinum chemistry.

Formation of defects in the graphite oxidization process: a positron study

High-resolution positron annihilation lifetime (PAL) and two-detector coincidence Doppler broadening of annihilation radiation (2D-DBAR) measurements on graphite and its oxide derivatives for defect information, differing in oxidization agents, are reported. Positron measurements were found to be very effective in the investigation of defects in graphite and its derivatives. Positrons are mainly annihilated in vacancy-like defects on the particle surface and in large open-volume holes associated with the interface of graphite and graphite oxide. Different types of defects have been detected for unexfoliated graphite oxide and exfoliated graphene oxide based on 2D-DBAR measurements, namely the vacancy cluster and vacancy-oxygen complexes. It is also interesting to observe that the calculated large open-volume diameter of graphene oxide coincides with the distance between the layers from the XRD investigation, which indicates that the annihilation of the long-lived lifetime component τ3 might take place in the area between the graphene layers; no large open-volume hole has been detected.

International education, the formation of capital and graduate employment : Chinese accounting graduates’ experiences of the Australian labour market

Since the late 1970s, international education has steadily gained in popularity in China.An emerging middle class seeks to strengthen its position in China’s rapidly stratifyingsociety under its socialist market economy with the shift from wealth creation for all towealth concentration for a few. Previously, a foreign qualification was considered apassport to success in either the host or home country’s labour market. But the growingpopularity of overseas study, coupled with the massification of the Chinese highereducation, means Chinese international students are seeking to distinguish themselvesin an increasingly competitive global labour market. This longitudinal study of internationalgraduates, backgrounded by Australian employer perceptions, examines thejourneys of 13 Chinese accounting graduates as they attempt to transition from anAustralian university into the Australian labour market. Bourdieu’s thinking tools offield, capital, disposition and habitus are utilised to consider how different cultural,social and linguistic capitals inform employer understandings of ‘employability’ meantChinese accounting graduates significantly adjusted their life goals.

Cisplatin-induced formation of biocompatible and biodegradable polypeptide-based vesicles for targeted anticancer drug delivery

Novel cisplatin (CDDP)-loaded, polypeptide-based vesicles for the targeted delivery of cisplatin to cancer cells have been prepared. These vesicles were formed from biocompatible and biodegradable maleimide-poly(ethylene oxide)114-b-poly(L-glutamic acid)12 (Mal-PEG114-b-PLG12) block copolymers upon conjugation with the drug itself. CDDP conjugation forms a short, rigid, cross-linked, drug-loaded, hydrophobic block in the copolymer, and subsequently induces self-assembly into hollow vesicle structures with average hydrodynamic diameters (Dh) of ∼ 270 nm. CDDP conjugation is critical to the formation of the vesicles. The reactive maleimide-PEG moieties that form the corona and inner layer of the vesicles were protected via formation of a reversible Diels-Alder (DA) adduct throughout the block copolymer synthesis so as to maintain their integrity. Drug release studies demonstrated a low and sustained drug release profile in systemic conditions (pH = 7.4, [Cl(-)] = 140 mM) with a higher "burst-like" release rate being observed under late endosomal/lysosomal conditions (pH = 5.2, [Cl(-)] = 35 mM). Further, the peripheral maleimide functionalities on the vesicle corona were conjugated to thiol-functionalized folic acid (FA) (via in situ reduction of a novel bis-FA disulfide, FA-SS-FA) to form an active targeting drug delivery system. These targeting vesicles exhibited significantly higher cellular binding/uptake into and dose-dependent cytotoxicity toward cancer cells (HeLa) compared to noncancerous cells (NIH-3T3), which show high and low folic acid receptor (FR) expression, respectively. This work thus demonstrates a novel approach to polypeptide-based vesicle assembly and a promising strategy for targeted, effective CDDP anticancer drug delivery.

The formation of ultrafine ferrite through static transformation in low carbon steels

A novel approach was used to produce an ultrafine grain structure in low carbon steels with a wide range of hardenability. This included warm deformation of supercooled austenite followed by reheating in the austenite region and cooling (RHA). The ultrafine ferrite structure was independent of steel composition. However, the mechanism of ferrite refinement changed with the steel quench hardenability. In a relatively low hardenable steel, the ultrafine structure was produced through dynamic strain induced transformation, whereas the ferrite refinement was formed by static transformation in steels with high quench hardenability. The use of a model Ni-30Fe austenitic alloy revealed that the deformation temperature has a strong effect on the nature of the intragranular defects. There was a transition temperature below which the cell dislocation structure changed to laminar microbands. It appears that the extreme refinement of ferrite is due to the formation of extensive high angle intragranular defects at these low deformation temperature that then act as sites for static transformation. © 2008 World Scientific Publishing Company.