Tracking spatial distribution of human-derived wastewater from Davis Station, East Antarctica, using δ15N and δ13C stable isotopes.

Stable isotope ratios, δ15N and δ13C were effectively used to determine the geographical dispersion of human derived sewage from Davis Station, East Antarctica, using Antarctic rock cod (Trematomus bernacchii). Fish within 0-4km downstream of the outfall exhibited higher δ15N and δ13C values relative to reference sites. Nitrogen in particular showed a stepped decrease in δ15N with increasing distance from the discharge point by 1-2‰. Stable isotopes were better able to detect the extent of wastewater contamination than other techniques including faecal coliform and sterol measures. Uptake and assimilation of δ15N and δ13C up to 4km from the outfall adds to growing evidence indicating the current level of wastewater treatment at Davis Station is not sufficient to avoid impact to the surrounding environment. Isotopic assimilation in T. bernacchii is a viable biomarker for investigation of initial sewage exposure and longer term monitoring in the future.

Application of enhanced membrane bioreactor (eMBR) to treat dye wastewater

An enhanced membrane bioreactor (eMBR) consisting of two anoxic bioreactors (ARs) followed by an aerated membrane bioreactor (AMBR), UV-unit and a granular activated carbon (GAC) filter was employed to treat 50-100 mg/L of remazol blue BR dye. The COD of the feed was 2334 mg/L and COD:TN:TP in the feed was 119:1.87:1. A feed flow rate of 5 L/d was maintained when the dye concentration was 50 mg/L; 10 L/d of return activated sludge was recirculated to each AR from the AMBR. Once the biological system is acclimatised, 95% of dye, 99% of COD, 97% of nitrogen and 73% of phosphorus were removed at a retention time of 74.4 h. When the effluent from the AMBR was drawn at a flux rate of 6.5 L/m(2)h, the trans-membrane pressure reached 40 kPa in every 10 days. AMBR effluent was passed through the UV-unit and GAC filter to remove the dye completely.

Functionality of nano and 3D-microhierarchical TiO₂ particles as coagulants for sericin extraction from the silk degumming wastewater

Amine-functionalised TiO2 particles were employed as coagulants to remove sericin from the silk degumming wastewater. Two types of TiO2 particles including 3D-microhierarchical TiO2 (Micron-size) and TiO2 nanoparticles (Degussa P-25) were used in this study. The surfaces of both types of TiO2 particles were functionalised using 3-aminopropyl trimethoxysilane (APTMS). The impacts of TiO2 type, pH, TiO2 concentration, and settling time on sericin removal efficiency were investigated. The efficiency of TiO2 particles in sericin removal was evaluated by measuring the residual turbidity and UV-vis spectra of the solutions before and after the treatment. Moreover, the COD, SDS-PAGE and protein assay tests were conducted to further analyse the treated solutions. The results demonstrated that the sericin removal efficiency of around 67% and turbidity reduction of 95% were achieved at the optimum conditions of 0.04 g TiO2, pH = 5, and 60 min settling time. Nano and micron-size TiO2 particles showed similar efficiency for sericin removal, but micron-size particles outweighed due to their higher efficiency in inducing greater turbidity reduction after 60 min. The obtained sericin/TiO2 composites were stable after several cycles of wash and could be useful in different fields including cosmetic, and textile finishing, among others.

The performance of the urban water and wastewater sectors in Australia

Substantial structural reform has occurred in the water and wastewater sectors of Australia's major urban centers over the past two decades. This reform has involved the corporatization of government assets and some vertical and horizontal separation. This paper analyses the performance of these sectors since the mid 1990s. In particular, it uses Malmquist Data Envelopment Analysis (DEA) to determine the different levels of productivity and efficiency improvement over this period. The results point to modest, but positive productivity gains in the larger urban centers, independent of industry structure. Further, it highlights the need to consider exogenous factors that can influence productivity outcomes in an industry generally associated with monopoly characteristics and dependent on water sources that are, to varying extents, unpredictable and uncontrollable.

Treatment of textile wastewater with membrane bioreactor: a critical review

Membrane bioreactor (MBR) technology has been used widely for various industrial wastewater treatments due to its distinct advantages over conventional bioreactors. Treatment of textile wastewater using MBR has been investigated as a simple, reliable and cost-effective process with a significant removal of contaminants. However, a major drawback in the operation of MBR is membrane fouling, which leads to the decline in permeate flux and therefore requires membrane cleaning. This eventually decreases the lifespan of the membrane. In this paper, the application of aerobic and anaerobic MBR for textile wastewater treatment as well as fouling and control of fouling in MBR processes have been reviewed. It has been found that long sludge retention time increases the degradation of pollutants by allowing slow growing microorganisms to establish but also contributes to membrane fouling. Further research aspects of MBR for textile wastewater treatment are also considered for sustainable operations of the process.

Reuse of car wash wastewater by chemical coagulation and membrane bioreactor treatment processes

Car wash wastewater contains significant concentrations of contaminants such as nutrients, organics, particulate matter, sand, oil, grease, diesel detergents and so on. A range of treatment processes such as a membrane bioreactor (MBR), coagulation and ozonation were investigated to treat car wash wastewater. Ozonation was effective in removing the chemicals and suspended solids; the removal efficiency was greater than the coagulation process. Once the MBR system was acclimatised, 100% of suspended solids, 99.2% of COD, 97.3% of TOC and 41% of ammonia were removed. This study demonstrates that MBR is a potentially promising treatment system for recycling car wash wastewater which could be reused in the same car wash station.

Photocatalytic TiO2/porous BNNSs composites for textile dyeing wastewater treatment

This project develops a novel photocatalyst for the cleaning of textile dyeing wastewater. The newly-developed photocatalyst was prepared by combing porous boron nitride nanosheets with titanium dioxide particles and these composites show potentials for the practical treatment of the textile dyeing wastewater in a large scale.

The environmental impact of sewage and wastewater outfalls in Antarctica: an example from Davis station, East Antarctica

We present a comprehensive scientific assessment of the environmental impacts of an Antarctic wastewater ocean outfall, at Davis station in East Antarctica. We assessed the effectiveness of current wastewater treatment and disposal requirements under the Protocol on Environmental Protection to the Antarctic Treaty. Macerated wastewater has been discharged from an outfall at Davis since the failure of the secondary treatment plant in 2005. Water, sediment and wildlife were tested for presence of human enteric bacteria and antibiotic resistance mechanisms. Epibiotic and sediment macrofaunal communities were tested for differences between sites near the outfall and controls. Local fish were examined for evidence of histopathological abnormalities. Sediments, fish and gastropods were tested for uptake of sewage as measured by stable isotopes of N and C. Escherichia coli carrying antibiotic resistance determinants were found in water, sediments and wildlife (the filter feeding bivalve Laternula eliptica). Fish (Trematomus bernacchii) within close proximity to the outfall had significantly more severe and greater occurrences of histopathological abnormalities than at controls, consistent with exposure to sewage. There was significant enrichment of (15)N in T. bernacchii and the predatory gastropod Neobuccinum eatoni around the outfall, providing evidence of uptake of sewage. There were significant differences between epibiotic and sediment macrofaunal communities at control and outfall sites (<1.5 km), when sites were separated into groups of similar habitat types. Benthic community composition was also strongly related to habitat and environmental drivers such as sea ice. The combined evidence indicated that the discharge of wastewater from the Davis outfall is causing environmental impacts. These findings suggest that conditions in Antarctic coastal locations, such as Davis, are unlikely to be conducive to initial dilution and rapid dispersal of wastewater as required under the Protocol on Environmental Protection to the Antarctic Treaty. Current minimum requirements for wastewater treatment and disposal in Antarctica are insufficient to ameliorate these risks and are likely to lead to accumulation of contaminants and introduction of non-native microbes and associated genetic elements. This new understanding suggests that modernised approaches to the treatment and disposal of wastewater are required in Antarctica. The most effective solution is advanced levels of wastewater treatment, which are now possible, feasible and a high priority for installation. As a direct outcome of the study, a new advanced treatment system is being installed at Davis, effectively avoiding environmental risks.