A study on bending behaviours of aluminium foam-filled tubes

In the study, the strengthening effect of aluminium foam in thin-walled aluminium tubes subject to bending load in investigated experimentally and numerically. Bending tests are conducted on foam filler, hollow tube and foam-filled tube. The finite element method is used as well to get deeper insight into the crush failure modes via focusing on the influence from wall thickness of the tube. The obtained information is useful to optimally design foam-filled tubes as energy absorbing devices in automotive engineering. The optimisation results can be implemented to find an optimum foam-filled tube that absorbs the same energy as the optimal hollow tube but with much less weight. © (2014) Trans Tech Publications, Switzerland.

Microstructure and texture evolution during tensile deformation of symmetric/asymmetric-rolled low carbon microalloyed steel

The deformation and fracture mechanisms of a low carbon microalloyed steel processed by asymmetric rolling (AsR) and symmetric rolling (SR) were compared by microstructural and texture evolutions during uniaxial tensile deformation. A realistic microstructure-based micromechanical modeling was involved as well. AsR provides more effective grain refinement and beneficial shear textures, leading to higher ductility and extraordinary strain hardening with improved yield and ultimate tensile stresses as well as promoting the occurrence of ductile fracture. This was verified and further explained by means of the different fracture modes during quasi-static uniaxial deformation, the preferred void nucleation sites and crack propagation behavior, and the change in the dislocation density based on the kernel average misorientation (KAM) distribution. The equivalent strain/stress partitioning during tensile deformation of AsR and SR specimens was modeled based on a two-dimensional (2D) representative volume element (RVE) approach. The trend of strain/stress partitioning in the ferrite matrix agrees well with the experimental results.

Asymmetric risk and return: evidence from the Australian Stock Exchange

This paper examines volatility asymmetry in a financial market using a stochastic volatility framework. We use the MCMC method for model estimations. There is evidence of volatility asymmetry in the data. Our asymmetric stochastic volatility in mean model, which nests both asymmetric stochastic volatility (ASV) and stochastic volatility in mean models (SVM), indicates ASV sufficiently captures the risk-return relationship; therefore, augmenting it with volatility in mean does not improve its performance. ASV fits the data better and yields more accurate out-of-sample forecasts than alternatives. We also demonstrate that asymmetry mainly emanates from the systematic parts of returns. As a result, it is more pronounced at the market level and the volatility feedback effect dominates the leverage effect.

Enhanced mechanical response of an ultrafine grained Ti-6Al-4V alloy produced through warm symmetric and asymmetric rolling

An equiaxed ultrafine-grained (UFG) microstructure was successfully produced in a Ti-6Al-4V alloy with an average grain size of 110-230. nm through symmetric and asymmetric warm rolling of a martensitic starting microstructure. The UFG material displayed a combination of ultrahigh strength and ductility at room temperature. Compared with the conventional symmetric rolling, the asymmetric rolling process led to a more pronounced effect of microstructure refinement and a higher tensile ductility. The optimum mechanical response was obtained though the asymmetric rolling at 70% reduction, offering an ultimate tensile strength of 1365. MPa and a total elongation of ~23%. Apart from the magnitude of grain refinement, the inclination of basal texture component from the normal towards the rolling direction during asymmetric rolling and possible strain induced β to martensite transformation may concurrently contribute to a remarkable tensile strength-ductility balance.

Asymmetric oil shocks and external balances of major oil exporting and importing countries

This study investigates the effects of oil price shocks on three measures of oil exporters' and oil importers' external balances: total trade balance, oil trade balance and non-oil trade balance. We employ three second-generation heterogeneous linear panel models and one recently developed non-linear panel estimation technique that allows for cross-sectional dependence. With respect to 28 major oil exporting countries, an increase in oil prices leads to an improved real oil trade balance, although it is detrimental to non-oil and total trade balances. This finding might be due to the expenditure effect arising from increases in proceeds from oil exports. A decrease in oil prices is found to be beneficial for both total and oil trade balances in these oil exporting countries. Forty major oil importers seem to be increasingly shielded from positive oil shocks over the 1970s and 1980s; however, they must worry about oil price declines. A decline in oil prices has a negative impact on both total and real oil trade balances resulting from increased oil imports in emerging economies. Hence, a decline in oil prices is beneficial to oil exporters due to the quantity effect outweighing the price effect, while for oil importers a stable oil price is more desirable than a price decline. These results are important to take into account if we are to gain a full understanding on the magnitude of the trade and macroeconomic effects of oil price changes and what the policy responses should be.

Qualitative assessment of bubble behaviour for central and asymmetric injection in 2D gas-solid fluidized bed using image analysis technique and CFD modelling

Bubble characteristics such as shape, size, and trajectory control the hydrodynamics and therefore heat transfer in fluidized bed reactors. Thus understanding these characteristics is very important for the design and scaleup of fluidized beds. An earlier developed Eulerian-Eulerian two-fluid model for simulating dense gas–solid two-phase flow has been used to compare the experimental data in a pseudo-two-dimensional (2-D) bed. Bubbles are injected asymmetrically by locating the nozzle at proximity to the wall, thus presenting the effect wall has on asymmetrical injection as compared to symmetrical injection. In this work, a digital image analysis technique was developed to study the bubble behaviour in a two-dimensional bubbling bed. The high-speed photography reveals an asymmetric wake formation during detachment indicating an early onset of mixing process. The wall forces acts tangentially on thebubble and has a significant impact on the bubble shape, neck formation during detachment and its trajectory through the bed. Larger bubbles drifting away from the centre with longer paths are observed. This qualitative behaviour is well predicted by CFD modelling. Asymmetric injection can significantly influence the heat and mass transfer characteristics.

Asymmetric self-learning for tackling Twitter spam drift

Spam has become a critical problem on Twitter. In order to stop spammers, security companies apply blacklisting services to filter spam links. However, over 90% victims will visit a new malicious link before it is blocked by blacklists. To eliminate the limitation of blacklists, researchers have proposed a number of statistical features based mechanisms, and applied machine learning techniques to detect Twitter spam. In our labelled large dataset, we observe that the statistical properties of spam tweets vary over time, and thus the performance of existing ML based classifiers are poor. This phenomenon is referred as 'Twitter Spam Drift'. In order to tackle this problem, we carry out deep analysis of 1 million spam tweets and 1 million non-spam tweets, and propose an asymmetric self-learning (ASL) approach. The proposed ASL can discover new information of changed tweeter spam and incorporate it into classifier training process. A number of experiments are performed to evaluate the ASL approach. The results show that the ASL approach can be used to significantly improve the spam detection accuracy of using traditional ML algorithms.

Micromechanical modelling of bending under tension forming behaviour of dual phase steel 600

A micromechanical modelling based approach by means of a Representative Volume Element (RVE) was employed to predict the flow behaviour and plastic strain of DP600 steel, produced by WISCO. Macroscopic modelling of a classical Bending-Under-Tension (BUT) experiment was employed to acquire strain deformation, and thus the following microscopic modelling was implemented by considering the realistic microstructure morphology. Comparisons between macroscopic behaviour and microscopic behaviour, including strain distribution and stress distribution, were extracted for different boundary conditions of the BUT set-up. The micro-macro modelling approach increases the understanding of the steel microstructure, which will enable this microstructure to be tailored for different applications in automobile industry in the future.

Modeling the effect of asymmetric rolling on mechanical properties of Al-Mg alloys

The mechanical behavior under uniaxial tension of Al-Mg alloy 5182 pre-deformed in conventional rolling (CR), asymmetric rolling-continuous (ASRC), and asymmetric rolling-reversed (ASRR) was investigated and modeled with a rate dependent crystal plasticity finite element method and VPSC (Visco-Plastic Self Consistent) model. M-K theory combined with Yld2000 model by Barlat et al. (Int. J. Plasticity 2003, 19, 1297) was used to predict the strain-based and stress-based formability for AA 5182 material. It was concluded that the new ASRR process has very compatible formability with improved strength compared to CR process. These merits can be directly applied for clam-shell resistant design in rigid-packaging industry.

Symmetric and asymmetric rolling of low carbon steels

 In this study, it is shown that a close to ideal shear texture can be formed throughout the thickness of a rolled sheet. Such rotation of rolling texture not only leads to the enhancement in grain refinement but also the secondary processing as compared to the symmetric rolling.