Eri silk fibre attributes and sliver preparation

Eri silk produced by Philosamia cynthia ricini silkworm is a fibre not well-known to the silk industry, in spite of the fact that Eri silk is finer, softer, and has better mechanical and thermal properties than most animal fibres. Eri silk has a high commercial potential, as the host plants of Eri silk worms are widespread in diverse geographical locations, and the worms also have a higher degree of disease resistance than most other silk worms. Mills are often not aware of the properties of Eri for designing appropriate end products. Thus, Eri silk yarn is traditionally produced by hand spinning, and Eri silk usually ends up as material for handwoven shawls. The potential for bulk fibre processing and the development of soft luxurious novel Eri silk products is yet to be discovered. To better understand the material and its processing behaviour, Eri silk was characterised and cocoons were processed into tops through degumming, opening, and cutting filaments into different lengths, followed by a worsted spun silk processing route. Fibre properties such as fineness, crimp, strength and length at different processing stages up to combed tops were measured. The results indicate that staple Eri silk can be processed via the worsted topmaking route, using a cut length of 200 mm or 150 mm for filament sheets prepared from degummed cocoons.

Fibre coating composition

An abrasion-resistant, electrically conductive material comprising a natural fibre-containing substrate and an electrically conductive conjugated polymer coating thereon is disclosed. A process for preparing an abrasion-resistant, electrically conductive material is also disclosed. The process comprises providing at least one monomer capable of forming an electrically conductive conjugated polymer, and a suitable substrate having a substrate surface, subjecting the substrate surface to a surface treatment step to improve abrasion resistance, and exposing the substrate surface to a vapour of the monomer to form an electrically conductive conjugated polymer coating thereon.

Studies on dietary fibre : analysis, epidemiological and physiological aspects

This thesis involves an investigation in three areas; first, a study of an enzymatic-gravimetric method for the analysis of dietary fibre; second, a survey of dietary fibre intake in an area of a developing country, and finally, some observations on the functional aspects of gel-forming dietary fibre in the rat. A simple and rapid enzymatic-gravimetric assay for both soluble and insoluble dietary fibre has been critically investigated. Reference samples were also analysed by a more comprehensive, enzymatic gas chromatographic method to allow testing of the relative accuracy of the enzymatic-gravimetric method. The enzymatic-gravimetric method was found to be highly reproducible but gave a slightly higher value for total dietary fibre than the more comprehensive method. This discrepancy is probably due to the presence of small quantities of resistant starch and protein residue which are recovered in the enzymatic-gravimetric method. In the enzymatic-gas chromatographic method, protein residue is not measured, and resistant starch is estimated, but not counted as dietary fibre. The enzymatic-gravimetric method was applied to the analysis of foods commonly consumed in the Padang region of West Sumatra in Indonesia, in order to estimate dietary fibre intake in the region. Daily intakes of usual foods were estimated by use of a 24-hour recall procedure aided by food photographs to assist in the estimation of portion size. Samples of approximately 60 of the most commonly consumed foods were collected and analysed for dietary fibre. These appear to be the first data which report values for dietary fibre in Indonesion foods and they represent a significant improvement upon the existing data on crude fibre content. Knowledge of the amounts of foods usually consumed and their dietary fibre content allowed an estimation of usual intakes of dietary fibre. Fibre intake was found to be lower than in the developing countries of Africa and was comparable to intakes measured in the U.K. This is the first study to show that in this part of South East Asia, a developing country area using polished rice as a staple food, dietary fibre intakes are as low as in Western countries. Low intakes of fibre are believed to be related to the prevalence of a range of diseases and, in this study, preliminary data on the rates of non-infective, chronic diseases were collected from the two main hospitals in West Sumatra. Chronic, non-infectious diseases such as inguinal hernia, appendicitis, haemorrhoids, diabetes mellitus, hypertension and malignant neoplasms of the rectum are relatively frequent in West Sumatra. While no firm conclusions can be drawn from these data, they do show the possibility of a relationship between low intakes of dietary fibre and the prevalence of these diseases, and suggest that further investigation is necessary. Some observations were made of the effect of gel-forming dietary fibre on stomach emptying and intestinal transit rate in the rat. Xanthan gum was added to iso-osmotic solutions to produce increased viscosity and phenol sulphonphthalein (phenol red) was used as a non-absorbable marker. Gavage feeding of solutions with a range of viscosities was used to study the effect of viscosity on the rate of stomach emptying and intestinal transit. Increased viscosity was observed to slow gastro-intestinal transit and this provides one mechanism by which dietary fibre of the gel-forming type ray improve glucose tolerance.

Mechanical behaviour of irregular fibre materials

This work investigates the effect of fibre irregularities on the mechanical behaviour of the irregular fibres using the finite element method (FEM). The first part of this work examines that the effect of fibre dimensional irregularities on the linear and non-linear tensile behaviour of the fibres, using a two-dimensional (2D) finite element models. In the linear simulation, a concept of method Young’s modulus is introduced. The method Young’s modulus, breaking load and breaking extension are affected by the magnitude and frequency of diameter variation in the fibre specimen. Fibre dimensional variation and the gauge length effect are also simulated. In the non-linear analysis, some additional information is obtained on changes in the yield and post-yield regions, which are clearly shown in the load-extension curves. Further investigation is focused on the flexural buckling behaviour of fibres with dimensional irregularities. A three-dimensional (3D) finite element model is used to simulate the buckling deformation of dimensionally irregular fibres, and the critical buckling load of the simulated fibre is calculated. Two parameters, the effective length and the average diameter within the effective length of an irregular fibre, are considered to be the key factors that influence the buckling behaviour of the fibre. An important aspect of this work is the calculation of the effective length of an irregular fibre specimen during buckling. This method has not been reported before. The third part of this work is on the combined tensile and torsional behaviour of fibres with dimensional irregularities, using a three-dimensional (3D) finite element model. Two types of fibres, polyester and wool, are simulated with sine waves of different level (magnitude) and frequency at different twist levels. For the polyester fibre, experiment verification of the simulation results has been carried out, and the results indicate the FE model is well acceptable for the simulation. The final part of this work examines the combined effect of dimensional and structural irregularities on the fibre tensile behaviour. Three-dimensional (3D) finite element models are used to simulate the cracks (transverse, longitudinal, combined transverse and longitudinal cracks) and cavities distributed in uniform fibres and fibres with 30% level of diameter variation, respectively. One of important conclusions is that under the simulated conditions, the dimensional irregularity of fibre influences the tensile behaviour of fibres more than the fibre structural irregularity. The fibre dimensional irregularity affects not only the values of the breaking load and breaking extension, but also the shape of load-extension curves. However, the fibre structural irregularity simulated in the study appears to have little effect on the shape of the load-extension curves. In addition, the effect of crack or cavity size, type and distribution on fibre tensile properties is also investigated.

Interaction of dietary fibre, carbohydrate metabolism and diabetes in the rat

It is currently accepted that the most appropriate diet in the treatment of non-insulin-dependent diabetes mellitus "e;NIDDM"e; is high in carbohydrates, high in fibre and low in fat. Dietary fibre reduces the rate of carbohydrate absorption, which may have a beneficial effect on insulin action. Furthermore, high fibre diets also increase the amount of carbohydrates which are not absorbed from the small intestine. These malabsorbed carbohydrates are fermented by the bacterial population in the large intestine, producing short chain fatty acids "e;SCFA"e;, including propionate, which has been shown to alter liver carbohydrate metabolism. This thesis investigated the actions of slowed carbohydrate absorption and carbohydrate malabsorption in streptozotocin-induced "e;STZ"e; diabetic rats. High carbohydrate diet supplemented with guar gum, a soluble dietary fibre, fed to STZ diabetic rats improved insulin sensitivity. investigation of the alterations in the stomach and small intestine demonstrated that guar increased the viscosity of the meal in the intestine. The action of increased fermentation, producing more propionate, was investigated by supplementing propionate into the diets of STZ diabetic rats or when perfused into isolated rat livers. No changes in insulin action or liver glucose metabolism were measured. in addition, it was shown that guar gum reduces food intake in STZ diabetic rats. Mild reductions in food intake in STZ diabetic rats were shown to increase insulin action. In summary, STZ diabetic rats fed high carbohydrate, high fibre diets reductions in food consumption and slowed carbohydrate absorption are important factors which may lower blood glucose concentrations and increase insulin action. increased SCFA production is unlikely to contribute significantly to the improvements in insulin action.