Preparation and characterization of water-in-oil-in-water emulsions containing a high concentration of L-ascorbic acid

This study sought to encapsulate a high concentration of L-ascorbic acid, up to 30% (w/v), in the inner aqueous phase of water-in-oil-water (W/O/W) emulsions with soybean oil as the oil phase. Two-step homogenization was conducted to prepare W/O/W emulsions stabilized by a hydrophobic emulsifier and 30% (v/v) of W/O droplets stabilized by a hydrophilic emulsifier. First-step homogenization prepared W/O emulsions with an average aqueous droplet diameter of 2.0 to 3.0 μm. Second-step homogenization prepared W/O/W emulsions with an average W/O droplet diameter of 14 to 18 μm and coefficients of variation (CVs) of 18% to 25%. The results indicated that stable W/O/W emulsions containing a high concentration of L-ascorbic acid were obtained by adding gelatin and magnesium sulfate in the inner aqueous phase and glucose in both aqueous phases. L-Ascorbic acid retention in the W/O/W emulsions was 40% on day 30 and followed first-order kinetics.

Preparation and characterization of water-in-oil emulsions loaded with high concentration of l-ascorbic acid

The present study was conducted to encapsulate higher concentration of l-ascorbic acid up to (30 g 100 mL-1) in the dispersed phase of water-in-oil (W/O) emulsions. Their continuous phase contained refined soybean oil or Moringa oleifera oil and a food-grade hydrophobic emulsifier. The volume fraction of the dispersed phase was fixed as to 30%. W/O emulsions with l-ascorbic acid retention greater than 95% were prepared using rotor-stator homogenizer at 7000 rpm for 5 min. The prepared W/O emulsions under this operating conditions had average droplet diameter of 2.0-3.0 μm and coefficients of variation of 13%-22%. All the W/O emulsions were stable for more than 30 days at 4 °C or 25 °C with slight increase in average droplet diameter and without phase separation. Their l-ascorbic acid retentions were 50 g 100 g-1 at 4 °C and 30 g 100 g-1 at 25 °C after 30 days of storage. l-ascorbic acid retention ratio of the prepared W/O emulsions followed first-order kinetics with a good fit.

Preparation, characterization and functional properties of flax seed protein isolate

Flaxseed protein isolate (FPI) was extracted from flaxseeds, and its amino acid composition and functional properties (solubility, thermal stability, emulsifying properties and electrostatic charge density, water holding and fat absorption capacities) were determined. The highest purity of FPI (90.6%) was achieved by extraction at 60°C. FPI had a low lysine to arginine ratio of 0.25, which is desired in heart-healthy foods and infant formulas. The denaturation temperature of FPI was 105°C. FPI had the highest emulsion activity index (375.51 m(2)/g), highest emulsion stability index (179.5 h) and zeta potential (-67.4 mV) when compared to those of other commonly used proteins, such as sodium caseinate (SC), whey protein isolate (WPI), gelatin (Gel) and soy protein isolate (SPI). The average emulsion droplet size of emulsions stabilized by these proteins was in the order SC