Dietary fiber, potassium, magnesium and calcium in relation to the risk of preeclampsia

To explore the relation between preeclampsia risk and maternal intake of dietary fiber, potassium, magnesium and calcium. STUDY DESIGN: We conducted a case-control study of 172 preeclamptics and 339 normotensive controls. Maternal dietary intake was assessed using a food frequency questionnaire. Logistic regression procedures were used to estimate the association between each dietary factor and preeclampsia risk. RESULTS: Fiber intake was inversely associated with the risk of preeclampsia. When extreme quartiles of total fiber intake were compared, the odds ratio (OR) for preeclampsia was 0.46 (95% confidence interval [CI] 0.23-0.92). The multivariate OR for preeclampsia for women in the top quartile of potassium intake (>4.1 g/d) versus the lowest quartile (<2.4 g/d) was 0.49 (95% CI 0.24-0.99). There was some evidence of a reduced risk of preeclampsia with a high intake of magnesium and calcium, though these results were not statistically significant. Intake of fruits and vegetables, low-fat dairy products, total cereal and dark bread were each associated with a reduced risk of preeclampsia. CONCLUSION: Our results support previous reports that suggest that diets high in fiber and potassium are associated with a reduced risk of hypertension. Maternal intake of recommended amounts of foods rich in fiber, potassium and other nutrients may reduce the risk of preeclampsia.

Influence of calcium ion deposition on apatite-inducing ability of porous titanium for biomedical applications

In the present study, the influence of calcium ion deposition on the apatite-inducing ability of porous titanium(Ti) was investigated in a modified simulated body fluid (m-SBF). Calcium hydroxide (Ca(OH)₂) solutions with five degrees of saturation were used to hydrothermally deposit Ca ions on porous Ti with a porosity of 80%. Apatite-inducing ability of the Ca-ion-deposited porous Ti was evaluated by soaking them in m-SBF for up to 14 days. Scanning electron microscopy (SEM) and X-ray diffractometry (XRD) confirmed that a thin layer of calcium titanate (CaTiO₃)/calcium oxide (CaO) mixture with a nanostructured porous network was produced on porous Ti substrates after hydrothermal treatment at 200 °C for 8 h. X-ray photoelectron spectroscopy results demonstrated that the content of the Ca ions deposited on Ti and the thickness of the CaTiO₃/CaO layer increased with increasing saturation degree of the Ca(OH)₂ solution. The thickest (over 10 nm) CaTiO₃/CaO layer with the highest Ca content was achieved on the Ti treated in an oversaturated Ca(OH)₂ solution (0.2 M). SEM, XRD, transmission electron microscopy and Fourier transformed infrared spectroscopy analysis indicated that the porous Ti samples deposited with the highest content of Ca ions exhibited the best apatite-inducing ability, producing a dense and complete carbonated apatite coating after a 14 day soaking in m-SBF. The present study illustrated the validity of using Ca ion deposition as a pre-treatment to endow desirable apatite-inducing ability of porous Ti for bone tissue engineering applications.

Microstructures and bond strengths of the calcium phosphate coatings formed on titanium from different simulated body fluids

Calcium phosphate (Ca-P) coatings were deposited on Ti substrates by a biomimetic method from m-SBF and 10× SBF, respectively. Comparative study of microstructures and bond strengths of the Ca-P coatings deposited from those different SBFs was carried out. Effect of the surface roughness of the substrates on the bond strength of the Ca-P coatings was also studied. Scanning electron microscopy (SEM), X-ray diffractometry (XRD), Fourier transformed infrared spectroscopy (FTIR), inductive coupled plasma spectrometry (ICP) and thermogravimetry (TG) were used to characterize the Ca-P coatings. The bond strengths between the coatings and Ti substrates were measured using an adhesive strength test. Results indicated that the ionic concentrations of the SBFs and the surface roughness of the substrate had a significant influence on the formation, morphology and bond strength of the Ca-P precipitates. The induction period of time to deposit a complete Ca-P layer from the m-SBF is much longer, but the Ca-P coating is denser and has higher bond strength than that formed from the 10× SBF. The Ti with a surface roughness of R_a 0.64 µm and R_z 2.81 µm favoures the formation of a compact Ca-P coating from the m-SBF with the highest bond strength of approximately 15.5 MPa.

Bioinformatic and expression analyses of genes mediating zinc homeostasis in Nostoc punctiforme

Zinc homeostasis was investigated in Nostoc punctiforme. Cell tolerance to Zn²⁺ over 14 days showed that ZnCl₂ levels above 22 µM significantly reduced cell viability. After 3 days in 22 µM ZnCl₂, ca. 12% of the Zn²⁺ was in an EDTA-resistant component, suggesting an intracellular localization. Zinquin fluorescence was detected within cells exposed to concentrations up to 37 µM relative to 0 µM treatment. Radiolabeled ⁶⁵Zn showed Zn²⁺ uptake increased over a 3-day period, while efflux occurred more rapidly within a 3-h time period. Four putative genes involved in Zn2+ uptake and efflux in N. punctiforme were identified: (i) the predicted Co/Zn/Cd cation transporter, putative CDF; (ii) the predicted divalent heavy-metal cation transporter, putative Zip; (iii) the ATPase component and Fe/Zn uptake regulation protein, putative Fur; and (iv) an ABC-type Mn/Zn transport system, putative zinc ZnuC, ZnuABC system component. Quantitative real-time PCR indicated the responsiveness of all four genes to 22 µM ZnCl₂ within 3 h, followed by a reduction to below basal levels after 24 h by putative ZIP, ZnuC, and Fur and a reduction to below basal level after 72 h by putative CDF efflux gene. These results demonstrate differential regulation of zinc transporters over time, indicating a role for them in zinc homeostasis in N. punctiforme.

The role of ATP7A in copper homeostasis

Menkes disease is a fatal genetic copper deficiency. The Menkes protein (ATP7A) was found to remove copper from tissues in mice that expressed the human ATP7A. Promising results were obtained with the use of a new copper complex for treatment of Menkes disease using a mouse model.

Interactive effects of exercise plus calcium-vitamin D3 on bone strength in older men

The findings from this 18-month, community-based study revealed that an exercise program involving strength training and jumping activities was feasible and effective for improving bone density, muscle mass and strength in older men. There were no additional skeletal benefits derived from consuming a high calcium-vitamin D milk drink.

Study of calcium and silicon migration in refractory magnesia

Studied the effect calcium and silicon impurities have on magnesia refractories, a material frequently used to line high-temperature furnaces. Advanced analytical techniques identified and mapped these impurities in both raw materials and finished magnesia refractories. This research considerably enhanced understanding of factors influencing refractory properties and quality.

Studies on the properties and the thermal decomposition kinetics of natural rubber prepared with calcium chloride

To evaluate calcium chloride coagulation technology, two kinds of raw natural rubber samples were produced by calcium chloride and acetic acid respectively. Plasticity retention index (PRI), thermal degradation process, thermal degradation kinetics and differential thermal analysis of two samples studied. Furthermore, thermal degradation activation energy, pre-exponential factor and rate constant were calculated. The results show that natural rubber produced by calcium chloride possesses good mechanical property and poor thermo-stability in comparison to natural rubber produced by acetic acid.

Is excess calcium harmful to health?

Most current guidelines recommend that older adults and the elderly strive for a total calcium intake (diet and supplements) of 1,000 to 1,300 mg/day to prevent osteoporosis and fractures. Traditionally, calcium supplements have been considered safe, effective and well tolerated, but their safety has recently been questioned due to potential adverse effects on vascular disease which may increase mortality. For example, the findings from a meta-analysis of randomized controlled trials (currently published in abstract form only) revealed that the use of calcium supplements was associated with an ~30% increased risk of myocardial infarction. If high levels of calcium are harmful to health, this may alter current public health recommendations with regard to the use of calcium supplements for preventing osteoporosis. In this review, we provide an overview of the latest information from human observational and prospective studies, randomized controlled trials and meta-analyses related to the effects of calcium supplementation on vascular disease and related risk factors, including blood pressure, lipid and lipoprotein levels and vascular calcification.

Dietary omega-3 fatty acids modify body fluid and cardiovascular homeostasis

Dietary omega-3 fatty acids are important for optimal nutrition. This research demonstrated the significant beneficial effects of these fatty acids on body fluid balance in aging and the regulation of blood pressure. A significant findng was that omega-3 fatty acids reduce neuro-inflammation (inflammation in the brain)

Health satisfaction and perceived control : investigating subjective wellbeing homeostasis

Through an investigation of relationships between subjective wellbeing, health satisfaction and perceived control, the thesis contributes to a greater understanding of the psychological adaptation processes of individuals experiencing back pain. Risk factors to subjective wellbeing are also identified, thus presenting opportunities to provide assistance before the onset of psychopathology.