Development of a mathematical model for solar module in photovoltaic systems

A mathematical model of a solar module is presented. This model takes into account solar model temperature and solar radiation. The experimental data of a solar module under natural environment condition (NEC) have been obtained to determine the model parameters. The experimental results are compared with those calculated by using a mathematical model. It shows that the mathematical model accurately simulates the current-voltage characteristics of the solar module under the NEC and therefore is suitable for photovoltaic system design and performance analysis.

Sustainability leading to building intelligence - knowledge sharing and transfer

A sustainable building regards energy use and greenhouse gas emissions as major components, and its sustainability is within a larger context of benefits about productivity, efficiency, health and safety, and serviceability. An intelligent building requires a quality building automation system design which increases productivity, reduces operational costs and protects the people using the facilities. Council House 2 (CH2) is claimed to change the way Australia approaches ecologically sustainable design and construction. Its building intelligence can be evaluated by energy and water efficiency and quality of indoor environments that elevate productivity and lower operational costs. This paper uses triangulation techniques, based upon the "Building Intelligence Quotient" by the Continental Automated Buildings Association (CABA) and "Green Star Rating" by the Green Building Council of Australia (GBCA), to cross-verify CH2’s sustainability and intelligence. The author examines 18 design reports and 10 research papers to case-study the effectiveness and efficiency of CH2 and concludes that it is not just another sustainable construction but an intelligent building per se. By leveraging the existing knowledge base of green rating, building professions can measure the intelligence without "reinventing the wheel".

Website physical activity interventions : preferences of potential users

Information and communication technologies (particularly websites and e-mail) have the potential to deliver health behavior change programs to large numbers of adults at low cost. Controlled trials using these new media to promote physical activity have produced mixed results. User-centered development methods can assist in understanding the preferences of potential participants for website functions and content, and may lead to more effective programs. Eight focus group discussions were conducted with 40 adults after they had accessed a previously trialed physical activity website. The discussions were audio taped, transcribed and interpreted using a themed analysis method. Four key themes emerged: structure, interactivity, environmental context and content. Preferences were expressed for websites that include simple interactive features, together with information on local community activity opportunities. Particular suggestions included online community notice boards, personalized progress charts, e-mail access to expert advice and access to information on specific local physical activity facilities and services. Website physical activity interventions could usefully include personally relevant interactive and environmentally focused features and services identified through a user-centered development process.

Intelligent 3D programmable surface

Creating a highly programmable surface operating at relatively high speed and in real time is an area of research with many challenges. Such a system has applications in the field of optical telescopes, product manufacturing, and giant 3D-screens and billboards for advertising and artwork. This paper covers certain aspects of a keynote presentation at ISDT 2010 including system design, modularity, programmability and the system control intelligence. An overview of the system architecture, actuator design, electronics and distributed control will provide an insight into how the system is controlled and self-tuned for a number of applications. A simulation environment that has been developed to streamline system reconfiguration will also be presented, demonstrating translation of complex mathematical functions into 3D shapes virtually before being displayed on the physical surface.

A generalised cost-aware caching scheme for caching continuous media objects in best-effort network environments

In this paper, we investigate the potential of caching to improve QoS in the context of continuous media applications over wired best-effort networks. We propose the use of a flexible caching scheme, called GD-Multi in caching continuous media (CM) objects. An important novel feature of our scheme is the provision of user or system administrator inputs in determining the cost function. Based on the proposed flexible cost function, Multi, an improvised Greedy Dual (GD) replacement algorithm called GD-multi (GDM) has been developed for layered multi-resolution multimedia streams. The proposed Multi function takes receiver feedback into account. We investigate the influence of parameters such as loss rate, jitter, delay and area in determining a proxy’s cache contents so as to enhance QoS perceived by clients. Simulation studies show improvement in QoS perceived at the clients in accordance to supplied optimisation metrics. From an implementation perspective, signalling requirements for carrying QoS feedback are minimal and fully compatible with existing RTSP-based Internet applications.

Keystroke patterns classification using the ARTMAP-FD neural network

This paper presents the development of a keystroke dynamics-based user authentication system using the ARTMAP-FD neural network. The effectiveness of ARTMAPFD in classifying keystroke patterns is analyzed and compared against a number of widely used machine learning systems. The results show that ARTMAP-FD performs well against many of its counterparts in keystroke patterns classification. Apart from that, instead of using the conventional typing timing characteristics, the applicability of typing pressure to ascertaining user's identity is investigated. The experimental results show that combining both latency and pressure patterns can improve the Equal Error Rate (ERR) of the system.

Scaling-up from an implementation trial to state-wide coverage : results from the preliminary Melbourne Diabetes Prevention Study

Background
The successful Greater Green Triangle Diabetes Prevention Program (GGT DPP), a small implementation trial, has been scaled-up to the Victorian state-wide ‘Life!’ programme with over 10,000 individuals enrolled. The Melbourne Diabetes Prevention Study (MDPS) is an evaluation of the translation from the GGT DPP to the Life! programme. We report results from the preliminary phase (pMDPS) of this evaluation.
Methods
The pMDPS is a randomised controlled trial with 92 individuals aged 50 to 75 at high risk of developing type 2 diabetes randomised to Life! or usual care. Intervention consisted of six structured 90-minute group sessions: five fortnightly sessions and the final session at 8 months. Participants underwent anthropometric and laboratory tests at baseline and 12 months, and provided self-reported psychosocial, dietary, and physical activity measures. Intervention group participants additionally underwent these tests at 3 months. Paired t tests were used to analyse within-group changes over time. Chi-square tests were used to analyse differences between groups in goals met at 12 months. Differences between groups for changes over time were tested with generalised estimating equations and analysis of covariance.
Results
Intervention participants significantly improved at 12 months in mean body mass index (−0.98 kg/m2, standard error (SE) = 0.26), weight (−2.65 kg, SE = 0.72), waist circumference (−7.45 cm, SE = 1.15), and systolic blood pressure (−3.18 mmHg, SE = 1.26), increased high-density lipoprotein-cholesterol (0.07 mmol/l, SE = 0.03), reduced energy from total (−2.00%, SE = 0.78) and saturated fat (−1.54%, SE = 0.41), and increased fibre intake (1.98 g/1,000 kcal energy, SE = 0.47). In controls, oral glucose at 2 hours deteriorated (0.59 mmol/l, SE = 0.27). Only waist circumference reduced significantly (−4.02 cm, SE = 0.95).

Intervention participants significantly outperformed controls over 12 months for body mass index and fibre intake. After baseline adjustment, they also showed greater weight loss and reduced saturated fat versus total energy intake.

At least 5% weight loss was achieved by 32% of intervention participants versus 0% controls.
Conclusions
pMDPS results indicate that scaling-up from implementation trial to state-wide programme is possible. The system design for Life! was fit for purpose of scaling-up from efficacy to effectiveness.

A robust learning control for SISO Nonlinear systems with T-S Fuzzy Model : C02-robust control

In this paper, a robust learning control is developed for a class of single input single output (SISO) nonlinear systems with T-S fuzzy model. It is seen that the proposed sliding mode learning control with the powerful Lipshitz-like condition can guarantee the stability, convergence and robustness of the closed-loop system without involving any assumptions on uncertain system dynamics. In addition, theconcept that the local system with the maximum membership function dominates the system dynamic behaviours helps to greatly simplify the control system design. It will be further seen that the continuous learning control ensures the advantage of chattering-free that may occur in conventional sliding mode systems. Simulation examples are presented to demonstrate the effectiveness of the proposed learning control through the comparison with the H-infinity control.

Stochastic models of road geometry and wind condition for vehicle energy management and control

Modeling and simulation is commonly used to improve vehicle performance, to optimize vehicle system design, and to reduce vehicle development time. Vehicle performances can be affected by environmental conditions and driver behavior factors, which are often uncertain and immeasurable. To incorporate the role of environmental conditions in the modeling and simulation of vehicle systems, both real and artificial data are used. Often, real data are unavailable or inadequate for extensive investigations. Hence, it is important to be able to construct artificial environmental data whose characteristics resemble those of the real data for modeling and simulation purposes. However, to produce credible vehicle simulation results, the simulated environment must be realistic and validated using accepted practices. This paper proposes a stochastic model that is capable of creating artificial environmental factors such as road geometry and wind conditions. In addition, road geometric design principles are employed to modify the created road data, making it consistent with the real-road geometry. Two sets of real-road geometry and wind condition data are employed to propose probability models. To justify the distribution goodness of fit, Pearson's chi-square and correlation statistics have been used. Finally, the stochastic models of road geometry and wind conditions (SMRWs) are developed to produce realistic road and wind data. SMRW can be used to predict vehicle performance, energy management, and control strategies over multiple driving cycles and to assist in developing fuel-efficient vehicles.

Real and substantial connections : Enforcing Canadian privacy laws against American social networking companies

Any organisation that captures personal data in Canada for processing is deemed tohave a ‘real and substantial connection’ to Canada and thus fall within thejurisdiction of the Personal Information Protection and Electronic Documents Act(PIPEDA) and of the Office of the Privacy Commissioner of Canada (OPC). Whathas been the experience of enforcing Canadian privacy protection law on US-basedsocial networking services? We analyse some of the high-profile enforcement actionsby the Privacy Commissioner. We also test compliance through an analysis of theprivacy policies of the top 23 SNSs operating in Canada and through the use of accessto personal information requests. Our analysis suggests that non-compliance iswidespread, and is explained by the countervailing conceptions of jurisdictioninherent in corporate policy and technical system design.

Building a digital library : what to expect as a technology project manager on a library construction project

The Taylor Family Digital Library is the central library opened in 2011 at the University of Calgary dedicated to supporting digital scholarship, creativity, analysis and a supportive learning environment for students. The new building is a technologically advanced converged cultural institution, with mandates to continually evolve in order to meet the needs of students and researchers. The infrastructure to support these mandates required research, collaboration and intense planning, resulting in new construction and technology standards for library renovation and construction projects. This pragmatic article is written for those who will follow in similar footsteps; it provides a roadmap for those embarking on the construction of a new technologically advanced library building.

iPrevent®: a tailored, web-based, decision support tool for breast cancer risk assessment and management

We aimed to develop a user-centered, web-based, decision support tool for breast cancer risk assessment and personalized risk management. Using a novel model choice algorithm, iPrevent(®) selects one of two validated breast cancer risk estimation models (IBIS or BOADICEA), based on risk factor data entered by the user. Resulting risk estimates are presented in simple language and graphic formats for easy comprehension. iPrevent(®) then presents risk-adapted, evidence-based, guideline-endorsed management options. Development was an iterative process with regular feedback from multidisciplinary experts and consumers. To verify iPrevent(®), risk factor data for 127 cases derived from the Australian Breast Cancer Family Study were entered into iPrevent(®), IBIS (v7.02), and BOADICEA (v3.0). Consistency of the model chosen by iPrevent(®) (i.e., IBIS or BOADICEA) with the programmed iPrevent(®) model choice algorithm was assessed. Estimated breast cancer risks from iPrevent(®) were compared with those attained directly from the chosen risk assessment model (IBIS or BOADICEA). Risk management interventions displayed by iPrevent(®) were assessed for appropriateness. Risk estimation model choice was 100 % consistent with the programmed iPrevent(®) logic. Discrepant 10-year and residual lifetime risk estimates of >1 % were found for 1 and 4 cases, respectively, none was clinically significant (maximal variation 1.4 %). Risk management interventions suggested by iPrevent(®) were 100 % appropriate. iPrevent(®) successfully integrates the IBIS and BOADICEA risk assessment models into a decision support tool that provides evidence-based, risk-adapted risk management advice. This may help to facilitate precision breast cancer prevention discussions between women and their healthcare providers.

Parametric urbanism in practice: Investigating new approaches based on analytically driven methods.

Growing popularity in parametric urbanism has prompted investigation into the effects digital parametric systems have had on the way we design. This research proposes a new method of Problem Centric System Design, encouraging working methods that are led by both the designer’s aspirations and the requirements of the design problem.

Design of user interfaces for job shop environment

User-computer interface development has gone through rapid development in recent years. These developments, however, have not yet been fully implemented in management information system (MIS) design for job shop manufacturing situations. Most of the commercially available MISs are operationally inflexible and do not support management in report generation and decision making, particularly in job shops. This paper describes a framework in developing system user interfaces for job shop manufacturing situations to highlight how a generic information system can be made more useful to managerial decision making. Object-oriented programming technology has been used to provide flexible access to information stored by a generic MIS. Twenty interfacing programs have been developed. For illustration, only three of those interface programs relating to generation of strategic level management reports are discussed here.

Human passive motions and a user-friendly energy harvesting system

Energy harvesting for wireless sensors and consumer electronic devices can significantly improve reliability and environmental sustainability of the devices. This is achieved by eliminating the dependency of these devices on rechargeable batteries, using clean and/or renewable energy sources. Energy harvesting from various energy sources is widely discussed among researchers and entrepreneurs, including harvesting energy from microscale phenomena. This topic is receiving increasing attention due to the rising numbers of low-power consumer electronic devices and wireless sensors, but also the increasing demand for more convenient and available devices. This article presents a feasibility study for an energy harvesting system based on a human's breathing motion. The system is based on a modified pants belt that is integrated with an array of piezoelectric films and a harvesting circuit. The proposed energy harvester generates electricity from reciprocal abdominal motions of the human subject. In comparison with existing breathing-based energy harvesters, the proposed system allows for safe and convenient energy harvesting with no influence on the natural movement of the lungs. Stomach pressure analysis and measurement, as well as the design and simulations of the proposed harvester, are presented. © 2013 The Author(s).