Solid state lithium ion conduction in pyrrolidinium imide–lithium imide salt mixtures

The properties of the binary salt system based on mixtures of methyl ethyl pyrrolidinium bis(trifluoromethane sulfonyl) imide (P₁₂) and lithium bis(trifluoromethane sulfonyl) imide (Li imide) are reported. The lithium containing mixtures were found to be more than two orders of magnitude more conductive than the parent P₁₂ phase and the 33 mol% Li imide systems showed a solid state conductivity around 1×10⁻⁴ S/cm at 20°C. This solid state conductivity is believed to take place in plastic crystal phases of the P₁₂ compound.

Ion conductivity in amorphous polymer/salt mixtures

Amorphous polymer/salt mixtures based on polyvinyl alcohol and poly(hydroxyethylacrylate) and poly(hydroxyethylmethacrylate) are described. The polyvinylalcohol materials have been prepared by a solvent free hot pressing technique as well as the traditional solvent casting method. The hot pressing technique allows the production of samples which are genuinely free of solvents and thereby has allowed an assessment in this work of the effect of residual solvent on conductivity. The acrylate materials were prepared by direct polymerization of monomer/salt mixtures, thus avoiding the need for solvents. These materials have glass transitions around or well above room temperature, but nonetheless have conductivities as high as 10⁻⁷ S/cm at room temperature. The temperature and composition dependence of conductivity are also presented.

Highly concentrated salt solutions : molecular dynamics simulations of structure and transport

Molecular dynamics (MD) simulations in NaI solutions, where the solvent has been represented by the Stockmayer fluid, were performed as a function of temperature, salt concentration, and solvent dipole strength. At higher temperatures contact ion pairs become more prevalent, regardless of solvent strength. An examination of the temperature dependence of the potential of mean force demonstrates the entropic nature of this effect. The transport properties calculated in the simulations are dependent on the balance between solvent dielectric constant and ion charge. In systems with a large solvent dipole moment, the ions appear to be independently mobile, and deviations from Nernst–Einstein behavior are small. In systems of smaller solvent dipole moment or greater ion charge, the ions form clusters, and large deviations from Nernst–Einstein behavior are observed.

Poly methacrylate-plasticiser-salt blends as solid polymer electrolytes

Methoxy-ethylene glycol methacrylates, CH₂=CMeCOO(CH₂CH₂O)_nMe (n = 1, 2, 3), ethoxy-triethylene glycol methacrylate, CH₂=CMeCOO(CH₂CH₂O)₃Et, and N,N-dimethylaminoethyl methacrylate, CH₂=CMeCOOCH₂CH₂NMe₂, were used to synthesise the corresponding polymers. Conductivities of these polymers complexed with lithium perchlorate were investigated. Tetraethylene glycol dimethyl ether was used as plasticiser to increase the conductivity of the materials. A conductivity of 10⁻⁵ S cm⁻¹ was obtained at room temperature for the plasticised polymer samples. Effects of polymer structure, plasticiser, salt concentration and temperature on conductivity and glass transition temperature of the polymer electrolytes are discussed.

Mechanical properties of polyether-plasticiser-salt systems as polymer electrolytes

The mechanical properties of urethane crosslinked poly(ethylene oxide-co-propylene oxide) glyceryl ether-plasticiser (tetraethylene glycol dimethyl ether, or methylformamide)-salt (LiClO₄)-based polymer electrolytes have been studied. It was found that, with increasing concentration of salt, the elastic modulus and tensile strength of the materials unexpectedly decrease. This is interpreted in terms of a predominance of intramolecular coordination of the Li⁺ ions by the polymer.

Gel electrolytes based on lithium macro-anion salt

Montmorillonites are composed of aluminosilicate layers stacked one above the other, and the layer thickness is approximately 1 nm. In this work lithium modified montmorillonite (Li-MMT) was prepared and used as a lithium macro-anion salt in gel electrolytes. It was found that Li-MMT exhibited good compatibility with poly(ethylene glycol), DMSO and the ionic liquid, 1-ethyl-3-methylimidazolium dicyanamide (EMIdca), and a few of novel gel electrolytes based on Li-MMT were obtained. These gel electrolytes were investigated by X-ray powder diffraction, solid state NMR, conductivity measurements and cyclic voltammetry. High conductivities up to 10^{− 4} to 10^{− 3} S/cm at room temperature were observed with these macro-anion gel electrolytes. These gel materials were promising to be used as lithium conductive electrolytes in electrochemical devices, such as lithium batteries.

The use of table and cooking salt in a sample of Australian adults

Dietary sodium, the major source being salt, is associated with hypertension. Australian adults consume more than the recommended amount of salt and approximately 15% of dietary sodium comes from salt added at the table and during cooking. Objective: To determine the frequency of and the demographic characteristics associated with discretionary salt use. Design: A cross sectional survey conducted in shopping centres within Metropolitan Melbourne. Participants completed a questionnaire assessing discretionary salt use and attitudes to salt intake. Outcomes: Four hundred and seventy four surveys were collected (65% female, 77% Caucasian, 64% holding a university qualification). Eighty nine percent of respondents were classified as salt users and 11% as non-salt users. Of the salt users 52% reported that they always or sometimes add salt during cooking and at the table. Those of Asian descent and younger respondents aged 18-24 years were more likely to be salt users (chi2=12.3, df=2, p<0.001; chi2=19.2, df=5, p<0.01). Conclusion: Discretionary salt use remains high. To successfully reduce population dietary salt intake public health campaigns are urgently required and need to include consumer advice to reduce discretionary salt use, whilst reducing the salt added to processed foods. Such campaigns should include younger age groups and should be appropriate for all ethnic backgrounds to raise the awareness of the risks of a high salt diet on health.

Consumer awareness and self-reported behaviours related to salt consumption in Australia

Australians are eating far more salt than is good for health. In May 2007, the Australian Division of World Action on Salt and Health (AWASH) launched a campaign to reduce population salt intake. A consumer survey was commissioned to quantify baseline aspects of awareness and behaviour related to salt and health amongst Australians. A total of 1084 individuals aged 14 years or over were surveyed by ACA Research using an established consumer panel. Participants were selected to include people of each sex, within different age bands, from major metropolitan and other areas of all Australian states and territories. Participants were invited via email to complete a brief questionnaire online. Two-thirds knew that salt was bad for health but only 14% knew the recommended maximum daily intake. Seventy percent correctly identified that most dietary salt comes from processed foods but only a quarter regularly checked food labels for salt content. Even fewer reported their food purchases were influenced by the salt level indicated (21%). The survey showed a moderate understanding of how salt effects health but there was little evidence of action to reduce salt intake. Consumer education will be one part of the effort necessary to reduce salt intake in Australia and will require government investment in a targeted campaign to achieve improvements in knowledge and behaviours.

Sequence analysis of a salt tolerant metagenomic clone

Metagenome represent an unlimited resource for discovery of novel genes. Here we report, sequence analysis of a salt tolerant metagenomic clone (6B4) from a pond water metagenomic library. Clone 6B4 had an insert of 2254 bp with G+C composition of 64.06%. DNA sequence from 6B4 showed homology to DNA sequences from proteobacteria indicating origin of 6B4 metagenomic insert from a yet uncharacterized proteobacteria. Two encoded proteins from clone 6B4 showed match with ATP-dependent Clp protease adaptor protein (ClpS) and phasin, while two truncated encoded proteins showed match with poly-3-hydroxybutyrate synthase and permease. Clp complex is known to play a role in stress tolerance. Expression of ClpS from metagenomic clone is proposed to be responsible for salt tolerance of the metagenomic clone 6B4.

Reclaiming spent liquor from cotton reactive dyebaths using nanofiltration membrane for possible reuse of water and salt

During dyeing, salts are placed in a dyebath to aid the fixation of various dyes on to the fabric while bases are added to raise the pH from around neutral to pH 11. Afterwards, the used dyebath solution, called dyebath spent liquor, is discharged with almost all the salts and bases added as well as unfixed dyes. Consequently, a lot of raw materials are lost in the waste stream ending up in the environment as pollutants. In this study, possibilities of reusing water and salts of dyebathes were investigated, using a nanofiltration membrane. When the salt concentration in the spent liquor was increased from 10 to 80 g/L, the salt rejection by membrane was found to decrease initially; however, the salt rejection increased over the time, which was not expected. The aggregation of dye was also studied and found to decrease in the concentrate when the salt concentration was increased. This may be due to the aggregation of salt in the concentrate, which explains the increase in salt rejection. This information is useful for the textile industry in evaluating the treated water quality for the purpose of reuse.

Nanofiltration for the possible reuse of water and recovery of sodium chloride salt from textile effluent

During the reactive dyeing of cotton, salts such as sodium chloride (NaCI) are placed in a dyebath to aid the exhaustion of various dyes onto the fabric while bases are added to raise the pH from around neutral to pH 11 to achieve fixation. Afterwards, the used dyebath solution, called dyebath spent liquor, is discharged with almost all the salts and bases added as well as unfixed dyes. Consequently, many raw materials are lost in the waste stream ending up in the environment as pollutants. In this study possibilities of reusing the water and salts of dyebaths were investigated using a nanofiltration membrane. When the NaCI concentration in the spent liquor was increased from 10 to 80 g/L, the NaC1 rejection by the membrane was found to decrease initially; however, the NaC1 rejection increased over time, which was not expected. The aggregation of dye was also studied and found to decrease in the concentrate when the salt concentration was increased. This information is useful for the textile industry in evaluating the treated water quality for the purpose of reuse.

Double-layer and solvation forces measured in a molten salt and its mixtures with water

Measurements have been made of the force between molecularly smooth mica surfaces immersed in ethylammonium nitrate, which is a molten salt at room temperature, and in mixtures of this salt with water across the concentration range from 10 -4 M to that of the pure salt, which is 11.2 M. At low concentrations the salt behaves as a typical 1:1 electrolyte, and we measure an electrical double-layer force whose range decreases with increasing salt concentration. At high concentrations, above about 1 M, the double-layer force becomes so weak and short-ranged that it is completely dominated by a solvation force extending up to 5 nm. In the pure molten salt the solvation force is an oscillatory function of surface separation comparable to that measured in simple nonpolar liquids. No monotonic component of solvation force is found.