Uplink power control via adaptive hmm estimation

Transmit power control is an important consideration in the cellular system design since it increases system capacity, improves QoS and reduces multi-user interference. In this paper, an adaptive power control design based on the identification of the underlying pathloss of the fading channel is presented. Making power control decisions based on the measured received power allows to model the fading channel pathloss dynamics with a Hidden Markov Model. Applying the online HMM identification algorithm enables accurate estimation of the real pathloss which ensures efficient performance of the suggested power control scheme.

Solar thermal aided power generation

Fossil fuel based power generation is and will still be the back bone of our world economy, albeit such form of power generation significantly contributes to global CO2 emissions. Solar energy is a clean, environmental friendly energy source for power generation, however solar photovoltaic electricity generation is not practical for large commercial scales due to its cost and high-tech nature. Solar thermal is another way to use solar energy to generate power. Many attempts to establish solar (solo) thermal power stations have been practiced all over the world. Although there are some advantages in solo solar thermal power systems, the efficiencies and costs of these systems are not so attractive. Alternately by modifying, if possible, the existing coal-fired power stations to generate green sustainable power, a much more efficient means of power generation can be reached. This paper presents the concept of solar aided power generation in conventional coal-fired power stations, i.e., integrating solar (thermal) energy into conventional fossil fuelled power generation cycles (termed as solar aided thermal power). The solar aided power generation (SAPG) concept has technically been derived to use the strong points of the two technologies (traditional regenerative Rankine cycle with relatively higher efficiency and solar heating at relatively low temperature range). The SAPG does not only contribute to increase the efficiencies of the conventional power station and reduce its emission of the greenhouse gases, but also provides a better way to use solar heat to generate the power. This paper presents the advantages of the SAPG at conceptual level.

Decision support in interest based negotiation support systems: the AssetDivider system

Negotiation Support Systems (NSS) model the process of negotiation from basic template support to more sophisticated decision making support. The authors attempt to develop systems capable of decision support by suggesting possible solutions for the given dispute. Current Negotiation Support Systems primarily rely upon mathematical optimisation techniques and often ignore heuristics and other methods derived from practice. This chapter discusses the technology of several negotiation support systems in family law developed in their laboratory based on data collected and methods derived from practise. The chapter explores similarities and differences between systems the authors have created and demonstrates their latest development, AssetDivider.

Simulation and visualization of fire using extended Lindenmayer systems

This research introduces a method of using Lindenmayer Systems to model the spreading and behavior of fire inside a factory building. The research investigates the use of L-System propagated fires for determining factors such as where the fire is most likely to spread first and how fast. It also looks at an alternative way of storing the Lindenmayer System, not in the form of a string but rather as a graph. A variation on the building and traversal process is also investigated, in which the L-System is traversed depth first instead of breadth first. Results of fire propagation are presented and we conclude that L-Systems are a suitable tool for fire propagation.

Change implementers’ resistance : considering power and resistance in IT implementation projects

Resistance is normally characterized as a set of behaviours located in and belonging to change recipients. Such behaviours are seen to thwart the legitimate aims of both change strategists and the change agents who implement systems and the associated organisational change on the strategists' behalf. However, results from our case study research indicate that resistance can be a property not only of change recipients’ behaviour, but also of change agents and change strategists. The resistance behaviours identified included the failure to follow a prescribed corporate method and template, a refusal to help or listen, a refusal to fix known problems, the display of an adversarial, confrontational, and/or condescending attitude, subversiveness, a poor work ethic, and a refusal to meet requests. This paper argues for a revised conceptualization of resistance as a behaviour that can be demonstrated by any IT project stakeholders, that cannot be divorced from considerations of power in the IT project context.

The impact of self-efficacy and perceived system efficacy on effectiveness of virtual training systems

This study developed and tested a research model which examined the impact of user perceptions of self-efficacy (SE) and virtual environment (VE) efficacy on the effectiveness of VE training systems. The model distinguishes between the perceptions of one’s own capability to perform trained tasks effectively and the perceptions of system performance, regarding the established parameters from literature. Specifically, the model posits that user perceptions will have positive effects on task performance and memory. Seventy-six adults participated in a VE in a controlled experiment, designed to empirically test the model. Each participant performed a series of object assembly tasks. The task involved selecting, rotating, releasing, inserting and manipulating 3D objects. Initially, the results of factor analysis demonstrated dimensionality of two user perception measures and produced a set of empirical validated factors underlining the VE efficacy. The results of regression analysis revealed that SE had a significant positive effect on perceived VE efficacy. No significant effects were found of perceptions on performance and memory. Furthermore, the study provided insights into the relationships between the perception measures and performance measures for assessing the efficacy of VE training systems. The study also addressed how well users learn, perform, adapt to and perceive the VE training, which provides valuable insight into the system efficacy.
Research and practical implications are presented at the end of the paper.

Prediction intervals for short-term wind farm power generation forecasts

Quantification of uncertainties associated with wind power generation forecasts is essential for optimal management of wind farms and their successful integration into power systems. This paper investigates two neural network-based methods for direct and rapid construction of prediction intervals (PIs) for short-term forecasting of power generation in wind farms. The lower upper bound estimation and bootstrap methods are used to quantify uncertainties associated with forecasts. The effectiveness and efficiency of these two general methods for uncertainty quantification is examined using twenty four month data from a wind farm in Australia. PIs with a confidence level of 90% are constructed for four forecasting horizons: five, ten, fifteen, and thirty minutes. Quantitative measures are applied for objective evaluation and unbiased comparison of PI quality. Demonstrated results indicate that reliable PIs can be constructed in a short time without resorting to complicate computational methods or models. Also quantitative comparison reveals that bootstrap PIs are more suitable for short prediction horizon, and lower upper bound estimation PIs are more appropriate for longer forecasting horizons.

Small-signal stability assessment of active distribution networks with dynamic loads

This paper investigates small-signal stability of a distribution system with distributed generator and induction motor load, as a dynamic element. The analysis is carried out over a distribution test system with different types of induction motor loads. The system is linearised by the perturbation method. Eigenvalues and participation factors are calculated to see the modal interaction of the system. The study indicates that load voltage dynamics significantly influence the damping of a newly identified voltage mode. This mode has frequency of oscillation between the electromechanical and subsynchronous oscillation of power systems. To justify the validity of the modal analysis time domain simulation is also carried out. Finally, significant parameters of the system that affect the damping and frequency of the oscillation are identified.

Voltage oscillations in power distribution networks in the presence of DFIGs and induction motor loads

This paper investigates the oscillatory behavior of power distribution systems in the presence of distributed generation. The analysis is carried out over a distribution test system with two doubly fed induction type wind generators and different types of induction motor loads. The system is linearized by the perturbation method. Eigenvalues are calculated to see the modal interaction within the system. The study indicates that interactions between closely placed converter controllers and induction motor loads significantly influence the damping of the oscillatory modes of the system. The critical modes have a frequency of oscillation between the electromechanical and subsynchronous oscillations of power systems. Time-domain simulations are carried out to verify the validity of the modal analysis and to provide a physical feel for the types of oscillations that occur in distribution systems. Finally, significant parameters of the system that affect the damping and frequency of the oscillation are identified.

Characteristics and applications of energy storage system to power network - A review

Maintaining reliability and stability of a power systems in transmission and distribution level becomes a big challenge in present scenario. Grid operators are always responsible to maintain equilibrium between available power generation and demand of end users. Maintaining grid balance is a bigger issue, in case of any unexpected generation shortage or grid disturbance or integration of any renewable energy sources like wind and solar power in the energy mix. In order to compensate such imbalance and to facilitate more renewable energy sources with the grid, energy storage system (ESS) started to be playing an important role with the advancement of the state of the art technology. ESS can also help to get reduction in greenhouse gas (GHG) emission by means of integrating more renewable energy sources to the grid. There are various types of Energy Storage (ES) technologies which are being used in power systems network from large scale (above 50MW) to small scale (up to 100KW). Based on the characteristics, each storage technology has their own merits and demerits. This paper carried out extensive review study and verifies merits and demerits of each storage technology and identifies the suitable technology for the future. This paper also has conducted feasibility study with the aid of E-SelectTM tool for various ES technologies in applications point of view at different grid locations. This review study helps to evaluate feasible ES technology for a particular electrical application and also helps to develop smart hybrid storage system for grid applications in efficient way.

Prospects of renewable energy in semi-arid region

Continuous usage of fossil fuels and other conventional resources to meet the growing demand has resulted in in-creased energy crisis and greenhouse gas emissions. Hence, it is essential to use renewable energy sources for more reliable, effective, sustainable and pollution free transmission and distribution networks. Therefore, to facilitate large-scale integration of renewable energy in particular wind and solar photovoltaic (PV) energy, this paper presents the feasibility analysis for semi-arid climate and finds the most suitable places in North East region of Victoria for re-newable energy generation. For economic and environmental analysis, Hybrid Optimization Model for Electric Re-newables (HOMER) has used to investigate the prospects of wind and solar energy considering the Net Present Cost (NPC), Cost of Energy (COE) and Renewable fraction (RF). Six locations are selected from North East region of Victo-ria and simulations are performed. From the feasibility analysis, it can be concluded that Mount Hotham is one of the most suitable locations for wind energy generation while Wangaratta is the most suitable location for solar energy generation. Mount Hotham is also the best suitable locations in North East region for hybrid power systems i.e., com-bination of both wind and solar energy generation.