Structure and capacitive properties of porous nanocrystalline VN produced by NH3 reduction of V2O5

Vanadium nitride (VN) is currently one of the most promising materials for electrodes of supercapacitors. The structure and electrochemical properties of VN synthesized by temperature-programmed NH₃ reduction of V₂O₅ are analyzed in this paper. Vanadium nitride produced via this route has distinctive structural characteristics. VN mimics the shape of the initial V₂O₅ precursor indicating a pronounced direct attachment of nitride grains. The particles have domains of grains with a preferential orientation (texture). The large volume of pores in VN is represented by the range of 15−110 nm. VN demonstrates capacitive properties in three different types of aqueous electrolytes, 1 M KOH, 1 M H₂SO₄, and 3 M NaCl. The material has an acceptable rate capability in all electrolytes, showing about 80% of its maximal capacitance at a current load of 1 A/g in galvanostatic charging/discharging experiments. The capacitance of 186 F/g is observed in 1 M KOH electrolyte at 1 A/g. The previously reported negative effect of material loading on the capacitance is significantly suppressed. The observed electrochemical characteristics related to the application of this material in supercapacitors can be correlated with the crystalline structure of the nitride and the composition of its surface layer.

Biomechanical properties of porous metal scaffolds as implant materials

The results obtained from this work reveal that high porous titanium foams have fracture mechanical properties that meet and exceed the required properties of both cortical and cancellous bones. With their good biocompatibility, light weight, strong structural integrity and possibility of bone in-growth these foams are suitable for biomedical applications.

Influence of particle concentration on initial collection efficiency and surface coverage in porous media filtration

Four sizes (0.095, 0.53, 1.0 and 2.01 μm) of polystyrene latex particles were used to prepare monodispersed suspensions at three different ionic strengths (10−3, 10−2.5 and 10−2M KCl). Filtration experiments were conducted using those suspensions in a filter column with glass beads as porous medium. The filter bed depth and the filtration velocity were kept at 5 cm and 1 m/h, respectively. When suspensions with equal mass concentrations (0.2 mg/L) or equal surface area concentrations (0.12 cm2/mL) were filtered through the system, the largest particles exhibited higher initial single collector efficiency, η. The difference between the η of largest particles and the smaller particles was prominent for suspensions with equal surface area concentrations at higher ionic strengths. The collision efficiency, α of those particles exhibits higher values at higher ionic strengths. Both at equal mass concentration and equal surface area concentration, α is only slightly dependent on particle sizes when compared to its dependence on ionic strength. Further, it was found that the specific surface coverage was similar for 0.095 μm, 0.53 μm and 1.0 μm particles during the transient stage of filtration at any ionic strength when the surface area concentrations of those suspension were equal.

Convection in fluid overlying porous layer : an application to Hall-Heroult cell

Finite-element method is used to predict the buoyancy-driven convection in a horizontal layer of fluid (aluminum melt) overlying a porous layer (cathode) saturated with the same fluid. This work aims to compare the Hall–Héroult process in electrolytic cell, where a layer of molten aluminum is reduced over the porous cathode surface. In this study, the physical system of the aluminum melt (fluid) and cathode (porous) together is considered as a composite system of fluid overlying porous layer. The main objective of this study to analyse the velocity components in thin fluid layer and its impact on a porous cathode surface if there is any. In addition, an externally imposed time-independent uniform magnetic field is used to analyse its influence on natural convective forces. The physical system of fluid overlying porous layer is analysed at different Hartmann, Darcy, and fluid-Rayleigh numbers for a fixed Prandtl number (Pr = 0.014). The predicted data show that the convective forces, caused by buoyancy-driven flow, are significant. It is shown that the velocity peaks moves toward the solid wall because of the presence of a magnetic field creating a stronger boundary-layer growth over the permeable cathode surface. The predicted results are plotted in terms of average Nusselt number and Darcy number to indicate the influence of pores and permeability on overall convective heat-transfer characteristics.

Natural convection in domed porous enclosures : non-darcian flow

The natural-convection flow and associated heat transfer in a fluid-saturated porous medium have been investigated using the generalized porous medium approach for a dome-shaped enclosure. Many new features have been predicted with the connective heat transfer and the shape of the top dome cover. The solutions are obtained for a wide range of Darcy and Rayleigh numbers for different offsets and eccentricities of the top dome covers. The detailed parametric study reveals that there is a significant change in heat transfer rate when the offset is between 0.2 and 0.4. Different shapes of conic section, such as circular, elliptical, parabolic, and hyperbolic are used for the top dome cover, and their effects on natural convection and heat transfer rates are studied.

A non-darcian numerical modeling in domed enclosures filled with heat-generating porous media

Numerical study of the natural-convection flow and heat transfer in a dome-shaped, heat-generating, porous enclosure is considered. The general conic equation for the top dome is used to consider various conical top sections such as circular, elliptical, parabolic, and hyperbolic. The individual effect of fluid Rayleigh, Darcy, and heat-generating parameters on flow patterns and heat transfer rates are analyzed and presented. The predicted results show that the heat-generating parameter has the most significant contribution toward the growth of bicellular core flow. Moreover, there is significant change in temperature distribution in comparison to rectangular enclosures, due to the existence of the domed-shape top adiabatic cover. The results also show that, regardless of Darcy and Rayleigh values, a flat adiabatic top cover tends to yield the highest value of Nusselt number, followed by circular, elliptical, parabolic, and hyperbolic top covers, respectively.

Natural convection in heat generating oval porous enclosurse : a non-darcian model

This paper presents a series of numerical simulations dealing with the problem of natural convection flows and associated heat transfer in an enclosure filled with a fluid-saturated porous medium. The analysis is based on the finite element technique and incorporates the Brinkman-extended Darcy model for an oval enclosure. The numerical results obtained for a modified Rayleigh number, Ra, Darcy number, Da, offset, E, and eccentricity, e, are presented and discussed. The numerical predictions for a square enclosure compared well with published data. It is found that any increase in Da or Ra results in a higher fluid velocity that is responsible for shifting the core of the flow. Moreover, at higher ovality (E = 0.5), asymmetric flow is observed even at the lower range of Rayleigh number (Ra ⩽ 20), which may be attributed to the effect of curved isothermal wall.

Biofunctionalization of 3D nylon 6,6 scaffolds using a two-step surface modification

Nylon is a relatively inert polymer. The ability to easily functionalize nylon with biomolecules will improve the utilization of nylon in biological systems. A potential use of the biofunctionalized nylon scaffolds is in devices for cell therapeutics that can specifically select cells present in small numbers, such as hematopoietic stem cells. This study developed a versatile and simple two-step technique combining oxygen plasma treatment with wet silanization to graft biomolecules onto nylon 6,6 3D porous scaffolds. Scaffolds that were exposed to oxygen plasma exhibited up to 13-fold increase in silane attachment ((3-mercaptopropyl)trimethoxysilane/(3-aminopropyl)trimethoxysilane) compared to untreated scaffolds. To address the limitation of nondestructive characterization of the surface chemistry of 3D scaffolds, fluorescent CdSe/ZnS nanoparticles were used as a reporting tool for -NH(2) functionalized surfaces. Scaffolds that were covalently bound with neutravidin protein remained stable in phosphate buffered saline up to four months. Functionality of the neutravidin-grafted scaffolds was demonstrated by the specific binding of CD4 cells to the scaffold via CD4-specific antibody. Ultimately, these neutravidin-functionalized 3D nylon scaffolds could be easily customized on demand utilizing a plethora of biotinylated biomolecules (antibodies, enzymes and proteins) to select for specific cell of interest. This technique can be extended to other applications, including the enhancement of cell-scaffold interactions.