Occupational health services in higher education : second annual report : summary

The second of three surveys of occupational health provision in UK higher education institutions was carried out in March 2003.

Information was collected on occupational health provision arrangements for all 193 members of UUK, other HEIs funded by HEFCE, constituent parts of the University of London and the University of Wales, and degree awarding bodies in the UK. There was a wide variety of arrangements. Thirty-eight percent had in-house services, 33% contracted with external providers for occupational health services, 13% made use of a local general practice or student health service, 6% had other or ad hoc arrangements and 9% had no occupational health service.

From student to therapist : follow up of a first cohort of Bachelor of occupational therapy students

Aim: This study aimed to investigate the perception of graduate students on their preparation for practice, at 7 months post graduation.
Method: Using an anonymous postal questionnaire, 18 respondents (58% response rate) provided data on the nature of current employment, the experience as a graduate therapist, and perceptions of their undergraduate experience in preparing them for practice.
Results: Fifty percent of the respondents were practising in a rural environment. There was a significant positive relationship between respondents perception of their curriculum and fieldwork experiences and their preparation for practice (rho = 0.52, p < 0.05, and rho = 0.55, p < 0.05, respectively). Of the fieldwork experiences, respondents rated block placements as more beneficial to practice than non-traditional placements. However, a correlational analysis showed the non-traditional placement was significantly related to preparation for practice (rho = 0.54, p < 0.05). On a sevenpoint Likert scale, respondents rated themselves from 5.2 to 5.7 for perceived self-competence as a newly graduated practitioner with community-based graduates having the higher rating. Confidence in clinical decision-making was rated 5.0 to 5.6 with community-based graduates having higher rating. Respondents reported a positive perception that the undergraduate program prepared them to enter the workforce and practise as an occupational therapist (mean ratings 5.5 to 6.2).
Conclusion: Respondents felt adequately prepared to enter the occupational therapy profession and workforce. Strengths and weaknesses in their preparation are discussed as well as the need for further research.

Social control, self-control and psychosocial problems in adolescent males

‘Psychosocial problems’ are psychological problems that are regarded as resulting from the interaction between the adaptive capacities of individuals and the demands of their physical and social environments. Many different factors have been theoretically proposed, and empirically established, as predictors of a range of psychosocial problems in adolescents. However, a problem exists in that this literature appears to lack an integrative framework that has validity across the range of problems that are observed. The purpose of the current research is to propose and test a model that draws together three clusters of factors that are useful in predicting the incidence of adolescent psychosocial problems. These are family structural background factors, family functioning variables and control beliefs. Data were collected from 155 adolescent males aged between 12 and 19 by a single concurrent and retrospective self-report questionnaire. This included data about the respondent (age, involvements with mental health or juvenile justice agencies) and family structural background factors (days per week worked by mother/father, occupational status for mother/father, residential mobility, number of persons in the family home). The questionnaire also incorporated the Parental Bonding Instrument (Parker, Tupling & Brown, 1979) to quantify the levels of perceived parental care and overprotection, and an adaptation of the Parental Discipline Style Scale (Shaw & Scott, 1991), to assess punitive, love withdrawing and inductive discipline practices. In addition, the (Low) Self-control Scale (Grasmick, Tittle, Bursick & Arneklev, 1993) and the Locus of Control of Behaviour Scale (Craig, Franklin, & Andrews, 1984) were used to collect data concerning adolescents’ perceived behavioural self-control and locus of control. Finally, selected sub-scales of the Child Behavior Checklist Youth Self-Report (Achenbach, 1991b) were used to collect data on the incidence of social withdrawal, somatisation, anxiety and depression, aggression and delinquency among the respondents, and in aggregated form, the incidence of ‘total problems’ and internalising and externalising behaviours. Results indicated family structural background factors, family functioning variables and control beliefs possess limited predicted validity and that the usefulness of the proposed model varies between specific psychosocial problems. Family functioning variables were generally stronger predictors than family structural background factors, particularly for internalising behaviours. Of these, levels of parental care and overprotection were generally the strongest predictors. Perceived self-control and locus of control were also generally strong predictors, but were particularly powerful with respect to externalising behaviours. The strength of predictive relationships was observed to vary between specific internalising and externalising behaviours, suggesting that individual difference variables not assessed in the current research were differentially influential. Finally, the parental and individual characteristics that predicted maximal levels of adjustment (defined in terms of minimal levels of internalising and externalising behaviours) were explored and the correlates of various parenting style typologies (Parker et al., 1979) were investigated. These results strongly confirmed the importance of family functioning and control beliefs with respect to the prediction of internalising, externalising and well-adjusted behaviours. In all analyses, substantial proportions of the variance in the incidence of problem behaviours remain unexplained. The findings are examined in relation to previous research focused on (familial) social control and (individual) self-control with respect to psychosocial problems in adolescents. In addition, methodological considerations are discussed and the implications of the findings for clinical and community interventions to address problem behaviours, and for further study, are explored.

Exposure estimation, uncertainty and variability in occupational hygiene retrospective assessment

This thesis reports on a quantitative exposure assessment and on an analysis of the attributes of the data used in the estimations, in particular distinguishing between its uncertainty and variability. A retrospective assessment of exposure to benzene was carried out for a case control study of leukaemia in the Australian petroleum industry. The study used the mean of personal task-based measurements (Base Estimates) in a deterministic algorithm and applied factors to model back to places, times etc for which no exposure measurements were available. Mean daily exposures were estimated, on an individual subject basis, by summing the task-based exposures. These mean exposures were multiplied by the years spent on each job to provide exposure estimates in ppm-years. These were summed to provide a Cumulative Estimate for each subject. Validation was completed for the model and key inputs. Exposures were low, most jobs were below TWA of 5 ppm benzene. Exposures in terminals were generally higher than at refineries. Cumulative Estimates ranged from 0.005 to 50.9 ppm-years, with 84 percent less than 10 ppm-years. Exposure probability distributions were developed for tanker drivers using Monte Carlo simulation of the exposure estimation algorithm. The outcome was a lognormal distribution of exposure for each driver. These provide the basis for alternative risk assessment metrics e.g. the frequency of short but intense exposures which provided only a minimal contribution to the long-term average exposure but may increase risk of leukaemia. The effect of different inputs to the model were examined and their significance assessed using Monte Carlo simulation. The Base Estimates were the most important determinant of exposure in the model. The sources of variability in the measured data were examined, including the effect of having censored data and the between and within-worker variability. The sources of uncertainty in the exposure estimates were analysed and consequential improvements in exposure assessment identified. Monte Carlo sampling was also used to examine the uncertainties and variability associated with the tanker drivers' exposure assessment, to derive an estimate of the range and to put confidence intervals on the daily mean exposures. The identified uncertainty was less than the variability associated with the estimates. The traditional approach to exposure estimation typically derives only point estimates of mean exposure. The approach developed here allows a range of exposure estimates to be made and provides a more flexible and improved basis for risk assessment.

Occupational health and safety management systems : system types and effectiveness

The aim of this thesis is to develop a framework to evaluate the relative performance of different types of health and safety management system. This objective is an analytical one, but it stems from a policy issue of public importance. Over the past decade Australia, like other countries, has seen the emergence and growth of interest in developing health and safety management systems. But are they all the same, and if not, do they differ in their effectiveness? The thesis does not seek to give a definitive answer to these questions. Given the novelty of the phenomenon and the lack of research on this subject, the research is exploratory. An hypothesis about the effectiveness of different health and safety management systems is developed rather than tested. The thesis proceeds by first defining health and safety management systems as a combination of the planning and review, the management arrangements, the consultative arrangements and the specific program elements that work together in an integrated way to improve health and safety performance. A research procedure is described involving twenty exploratory case studies. The thesis then - develops - from the literature and the case study research - an analytical framework to evaluate the performance of different health and safety management systems. That framework has two parts. First is a typology of health and safety management systems. This is constructed from two distinctions - between 'safe place' and 'safe person' approaches to health and safety; and between 'innovative' and traditional' management methods and structures. These distinctions yield four types of system. The typology was applied to the case studies which yielded a reasonable fit in most instances. The second part of the framework is a 'process evaluation' technique akin to Quality standards. Derived from the Victorian SafetyMAP audit criteria, the "e;process evaluation tool "e; is preferred to traditional outcome measures such as incident or claim rates. Using this measure, the twenty case study enterprises were classified as above average, average or below average in performance. These results correlated poorly with traditional incident trend and benchmark measures. The two elements of the framework are then combined to explore the relationship between the different types of system and their performance. Evidence from the twenty case studies showed a tendency for innovative/safe place firms to perform better than traditional/safe person firms. This finding can form the basis for a hypothesis that may be subject to statistical testing on a generalisable sample. In addition five 'best practice' cases were selected and subjected to a cross case analysis to search for common characteristics that might explain their performance. This analysis suggests the importance of a number of factors: senior managers who drive health and safety change and mobilise all possible resources in the pursuit of change; health and safety representatives who work with managers in a 'joint regulatory relationship' across system activities; the involvement of employees more generally, but not as a substitute for action by managers and health and safety representatives; a comprehensive approach to elimination of all hazards; and the introduction of innovative programs to continually improve systems and facilitate employee involvement in health and safety.

Occupational therapists and the use of constraint-induced movement therapy in neurological practice

There is adaquate evidence for supporting the use of constraint-induced movement therapy (CIMT) in post-stroke rehabilitation. However, the actual usage of CIMT in routine occupational therapy practice appears limited. Further research is required to study why this might be so.

Application of the psychological contract to occupational safety

Psychological contracts were applied to occupational safety. A psychological contract of safety measure was developed and validated, and a model of safety developed to investigate breach and fulfilment of the psychological contract of safety. Findings suggest that the psychological contract of safety impacts safety attitudes and safety behaviour.

Safer injections, fewer infections : management of needles and sharps and occupational blood exposure in rural north Indian health settings

This study investigated injection practices and occupational exposure to blood in rural north Indian health settings. The findings highlighted a range of practices potentially contributing to the transmission of hepatitis and HIV to both patients and staff in these settings. Interventions need to focus on the development of organisational structures to support and facilitate safer practices.

Mobility and vision for mobile robots in non-deterministic, competitive environments

Develops an award winning design for an omnidirectional mobile robot that is both lightweight and extremely maneuverable. Two methods of robot vision, one using rotating lasers and a second using color video cameras were also developed and the merits of both explored.

Intelligent based mobility models for data management in wireless sensor networks

Wireless sensor networks (WSNs) are proposed as powerful means for fine grained monitoring in different classes of applications at very low cost and for extended periods of time. Among various solutions, supporting WSNs with intelligent mobile platforms for handling the data management, proved its benefits towards extending the network lifetime and enhancing its performance. The mobility model applied highly affects the data latency in the network as well as the sensors’ energy consumption levels. Intelligent-based models taking into consideration the network runtime conditions are adopted to overcome such problems. In this chapter, existing proposals that use intelligent mobility for managing the data in WSNs are surveyed. Different classifications are presented through the chapter to give a complete view on the solutions lying in this domain. Furthermore, these models are compared considering various metrics and design goals.