Organic Solvent-Based Graphene Oxide Liquid Crystals: A Facile Route toward the Next Generation of Self-Assembled Layer-by-Layer Multifunctional 3D Architectures

We introduce soft self-assembly of ultralarge liquid crystalline (LC) graphene oxide (GO) sheets in a wide range of organic solvents overcoming the practical limitations imposed on LC GO processing in water. This expands the number of known solvents which can support amphiphilic self-assembly to ethanol, acetone, tetrahydrofuran, N-dimethylformamide, N-cyclohexyl-2-pyrrolidone, and a number of other organic solvents, many of which were not known to afford solvophobic self-assembly prior to this report. The LC behavior of the as-prepared GO sheets in organic solvents has enabled us to disperse and organize substantial amounts of aggregate-free single-walled carbon nanotubes (SWNTs, up to 10 wt %) without compromise in LC properties. The as-prepared LC GO-SWNT dispersions were employed to achieve self-assembled layer-by-layer multifunctional 3D hybrid architectures comprising SWNTs and GO with unrivalled superior mechanical properties (Young’s modulus in excess of 50 GPa and tensile strength of more than 500 MPa).

Nucleic acid aptamer-guided cancer therapeutics and diagnostics: the next generation of cancer medicine

Conventional anticancer therapies, such as chemo- and/or radio-therapy are often unable to completely eradicate cancers due to abnormal tumor microenvironment, as well as increased drug/radiation resistance. More effective therapeutic strategies for overcoming these obstacles are urgently in demand. Aptamers, as chemical antibodies that bind to targets with high affinity and specificity, are a promising new and novel agent for both cancer diagnostic and therapeutic applications. Aptamer-based cancer cell targeting facilitates the development of active targeting in which aptamer-mediated drug delivery could provide promising anticancer outcomes. This review is to update the current progress of aptamer-based cancer diagnosis and aptamer-mediated active targeting for cancer therapy in vivo, exploring the potential of this novel form of targeted cancer therapy.

Nanostructured liquid crystalline particles as next generation agrochemical delivery vehicles

A new system for delivering agrichemicals to crop plants was investigated. Nano-structured lipid particles were used as an alternative to traditional surfactants for penetrating plant surfaces. In laboratory and field trials the nanoparticles delivered chemicals effectively, caused less damage to plants, required less water and resulted in lower environmental impacts.

Activity of cabazitaxel in castration-resistant prostate cancer progressing after docetaxel and next-generation endocrine agents

Background Cabazitaxel, abiraterone, and enzalutamide are survival-prolonging treatments in men with castration-resistant prostate cancer (CRPC) progressing following docetaxel chemotherapy. The sequential activity of these agents has not been studied and treatment sequencing remains a key dilemma for clinicians. Objective To describe the antitumour activity of cabazitaxel after docetaxel and next-generation endocrine agents. Design, setting, and participants We report on a cohort of 59 men with progressing CRPC treated with cabazitaxel, 37 of whom had received prior abiraterone and 9 of whom had received prior enzalutamide. Outcome measurements and statistical analysis Changes in prostate-specific antigen (PSA) level were used to determine activity on abiraterone, enzalutamide, and cabazitaxel treatment. Radiologic tumour regressions according to Response Evaluation Criteria in Solid Tumors (RECIST) and symptomatic benefit were evaluated for cabazitaxel therapy. Results and limitations The post-endocrine-therapy patients received abiraterone (n = 32), sequential abiraterone and enzalutamide (n = 5) or enzalutamide (n = 4). These patients received a median of 7 mo of abiraterone and 11 mo of enzalutamide. A median of six cabazitaxel cycles (range: 1-10 cycles) were delivered, with ≥50% PSA declines in 16 of 41 (39%) patients, soft tissue radiologic responses in 3 of 22 (14%) evaluable patients, and symptomatic benefit in 9 of 37 evaluable patients (24%). Median overall survival and progression-free survival were 15.8 and 4.6 mo, respectively. Antitumor activity on cabazitaxel was less favourable in the abiraterone- and enzalutamide-naïve cohort (n = 18), likely reflecting biologic differences in this cohort. These data were obtained from a retrospective analysis. Conclusions This is the first report of cabazitaxel activity in CRPC progressing after treatment with docetaxel and abiraterone or enzalutamide. We demonstrate significant cabazitaxel activity in this setting. Patient summary We looked at the antitumour activity of the chemotherapy drug cabazitaxel in men previously treated with docetaxel chemotherapy and the hormonal drugs abiraterone and enzalutamide. Cabazitaxel appeared active when given after abiraterone and enzalutamide. We can reassure men that cabazitaxel can be used after these novel endocrine treatments. © 2013 European Association of Urology.

Ultrafine wools: comfort and handle properties for next-to-skin knitwear and manufacturing performance

This study aimed to quantify the skin comfort and handle properties of a range of wool fabrics produced from ultrafine wool (13.7–15.1 µm) and in doing so determine if differences in fiber diameter and staple crimp frequency (5.3–7.1 crimps/cm) were important in these properties. The fabrics were evaluated using a range of subjective and objective measurement techniques, including the Wool ComfortMeter, the Wool HandleMeter and in wearer trials. This work indicated that single jersey fabrics made from ultrafine wool are approaching the limit of objective and subjective evaluation of next-to-skin comfort. The results from the Wool ComfortMeter, Wool HandleMeter and the wearer trial show that there were no significant effects that can be attributed to wool staple crimp (fiber curvature) in these ultrafine wool fabrics. The work also demonstrated a difference in the manufacturing response when knitted fabric made from wools of different fiber diameter (13.7–23.7 µm), and using yarns of the same count, resulted in a progressively higher fabric mass per unit area as mean fiber diameter was progressively reduced.

The influence of fiber diameter, fabric attributes and environmental conditions on wetness sensations of next-to-skin knitwear

This study investigated the relationships between the sensations of sweaty, damp, muggy and clingy, as assessed by human response from wearer trial garment assessment, and fiber type, fiber, yarn and fabric properties and instrumental fabric measurements of next-to-skin knitwear. Wearer trial assessment of 48 fabrics followed a strict 60 minute protocol including a range of environmental conditions and levels of exercise. Adjusted mean weighted scores were determined using linked garments. Instrumental fabric handle measurements were determined with the Wool HandleMeter (WHM) and Wool ComfortMeter. Data were analyzed using forward stepwise general linear modeling. Mean fiber diameter (MFD) affected the sweaty, damp, muggy and clingy sensation responses accounting for between 23.5% and 56.2% of the variance of these sensations. In all cases, finer fibers were associated with lower sensation scores (preferred). There were also effects of fiber type upon sweaty, muggy and clingy scores, with polyester fiber fabrics having higher scores (less preferred) compared with fabrics composed of wool, particularly for peak sweaty scores in hot and active environments. Attributes such as fabric density, yarn linear density, knitting structure and finishing treatments, but not fabric thickness, accounted for some further variance in these attributes once MFD had been taken into account. This is explained as finer fibers have a greater surface area for any given mass of fiber and so finer fibers can act as a more effective sink for moisture compared with coarser fibers. No fabric handle parameter or other attribute of fiber diameter distribution was significant in affecting these sensation scores.

Australia and Solomon Islands: what next after 14 years of regional assistance?

In 2003, Australia led a modest intervention into Solomon Islands in response to both growing civil unrest and an escalating economic crisis. New Zealand and several Pacific Island countries contributed to this response, which became known as Regional Assistance Mission to Solomon Islands, or RAMSI. With the mission due to withdraw in 2017, this article explores whether there are indicators that the country is likely to return to civil unrest through assessing whether firearms and other weapons are again being sourced and stockpiled, and considers what else could be done for Australia and Solomon Islands to move beyond RAMSI and into a new phase of peaceful cooperation.

Effects of preconception disordered eating on next generation birth outcomes

 This thesis aimed to examine the effects of adolescent disordered eating on next generation birth outcomes. Findings from this thesis revealed a significantly increased risk of small for gestational age births to women reporting disordered eating behaviours in adolescence and evidence of intergenerational patterns of low birth weight births.

The next step in energy rating: the international ETTV method vs. BCA Section-J glazing calculator

The most important prevention in minimizing energy transfer in commercial buildings is the treatment of glazing in the building facade. In a commercial building, while the impacts of roof, walls and floors on the overall heating and cooling loads of the building have low effects, glazing is likely to be the most important factor. This paper investigates the BCA Section-J glazing calculator and the ETTV (Envelope Thermal Transfer Value) methods and tries to look for differences as well as similarities in calculation of building envelopes energy performance. For this investigation, a hypothetical high-rise commercial building in Melbourne, Australia is considered when evaluating the energy performance of the envelope through these two methods. Both methods consider the U-Value of glass and wall materials as well as Solar Heat Gain Coefficient (SHGC) and Shading Coefficient (SC) of the glass. Findings in this research project indicate differences and significant discrepancies between the BCA Section-J and ETTV methods in evaluating the energy performance of commercial building façades. Issues of calculation weaknesses are identified with the lack of air leakage and infiltration of a particular façade design or window to wall ratio (WWR). Suggestions have been made where improvement to the overall energy calculation through facades of a commercial building is needed.

Next generation membranes for membrane distillation and future prospects

This chapter presents the most recent advances in membrane materials technology and module configurations for membrane distillation (MD), as well as their novel applications. The impact of the material morphology, surface energy, and pore structure on MD performance is discussed. The differences between hollow fibres and flat sheet membrane materials are also examined and promising novel structures or module configurations reviewed. In addition, novel materials and module configuration strategies are also identified that may lead to superior MD systems. Also, this chapter identifies current gaps where further work may lead to ongoing improvements to MD.