Effect of sorghum flour addition on in vitro starch digestibility, cooking quality and consumer acceptability of durum wheat pasta

Whole grain sorghum is a valuable source of resistant starch and polyphenolic antioxidants and its addition into staple food like pasta may reduce the starch digestibility. However, incorporating nondurum wheat materials into pasta provides a challenge in terms of maintaining cooking quality and consumer acceptability. Pasta was prepared from 100% durum wheat semolina (DWS) as control or by replacing DWS with either wholegrain red sorghum flour (RSF) or white sorghum flour (WSF) each at 20%, 30%, and 40% incorporation levels, following a laboratory-scale procedure. Pasta samples were evaluated for proximate composition, in vitro starch digestibility, cooking quality, and consumer acceptability. The addition of both RSF and WSF lowered the extent of in vitro starch digestion at all substitution levels compared to the control pasta. The rapidly digestible starch was lowered in all the sorghum-containing pastas compared to the control pasta. Neither RSF or WSF addition affected the pasta quality attributes (water absorption, swelling index, dry matter, adhesiveness, cohesiveness, and springiness), except color and hardness which were negatively affected. Consumer sensory results indicated that pasta samples containing 20% and 30% RSF or WSF had acceptable palatability based on meeting one or both of the preset acceptability criteria. It is concluded that the addition of wholegrain sorghum flour to pasta at 30% incorporation level is possible to reduce starch digestibility, while maintaining adequate cooking quality and consumer acceptability.

The addition of a surfactant at regular time intervals in the mechanical alloying process

The impact of regular additions of a surfactant (ethylene bis-stearamide; EBS) at different time intervals was investigated on the powder characteristics of a biomedical Ti-10Nb-3Mo alloy (wt.%). Ball milling was performed for 10 h on the elemental powders in four series of experiments at two rotation speeds (200 and 300 rpm). The addition of 2 wt.% total EBS at different time intervals during ball milling resulted in noticeable changes in particle size and morphology of the powders. The surfactant addition at shorter time intervals led to the formation of finer particles, a more homogenous powder distribution, a higher powder yield, and a lower contamination content in the final materials. Thermal analysis of the powders after ball milling suggested that differing decomposition rates of the surfactant were responsible for the measured powder particle changes and contamination contents. The results also indicated that the addition of surfactant during ball milling at 200 rpm caused a delay in the alloy formation, whereas ball milling at 300 rpm favored the formation of the titanium alloy.Crown Copyright © 2014 Published by Elsevier B.V. All rights reserved.

The addition of fluoxetine to cognitive behavioural therapy for youth depression (YoDA-C): study protocol for a randomised control trial.

The aim of the Youth Depression Alleviation-Combined Treatment (YoDA-C) study is to determine whether antidepressant medication should be started as a first-line treatment for youth depression delivered concurrently with psychotherapy. Doubts about the use of medication have been raised by meta-analyses in which the efficacy and safety of antidepressants in young people have been questioned, and subsequent treatment guidelines for youth depression have provided only qualified support.

The value of visual fleece assessment in addition to objective measurements in identifying Angora goats of greater clean mohair production

Visual assessment of the fleece of Merino sheep is an accepted method to aid genetic improvement but there is little evidence to support the use of visual assessment for improving mohair production. This paper examines the extent that visual traits, including staple length, character (staple crimp), staple definition, tippiness, style and staple entanglement, are related to clean fleece weight in animals of similar live weight and mean fibre diameter (MFD) from the same flock. Measurements were made over 9 shearing periods on a population of castrated Angora males (wethers) goats representing the current range and diversity of genetic origins in Australia, including South African, Texan and interbred admixtures of these and Australian sources (these different genetic origins are defined as Breed in this work). Data on genetic origin, sire, dam, lifetime characteristics (date of birth, dam age, birth weight, birth parity (single or twin), weaning weight), live weight, fleece growth and visual fleece attributes were recorded. A restricted maximum likelihood (REML) model was developed to relate clean fleece weight with age, MFD, average fleece-free live weight, lifetime characteristics and visual fleece attributes. There were separate linear responses of clean fleece weight to MFD and staple length for each age group, a quadratic response to the square root of average fleece-free live weight, an effect of sire breed and linear responses to dam age, staple definition score and character. Depending on age at shearing, the increase in clean fleece weight was between about 50 and 80. g for each increase of 1. μm in MFD. At similar MFD, clean fleece weight was generally greater at summer shearings compared with winter shearings. There was a strong increase in clean fleece weight with average fleece-free live weight up to around 50. kg but little response in clean fleece weight for animals larger than 50. kg. There was some evidence of a smaller increase in clean fleece weight as the age of dam increased. There was an effect of Breed in the model but this effect disappeared when a random sire effect was included in the model. There was a positive response to staple length at some age groups but the response did not differ from zero in other age groups. This response varied from negligible to about 70. g per 1. cm increase in staple length. Clean fleece weight increased about 40. g per unit increase in staple definition score and increased about 30. g for every 4 units increase in the number of staple crimps. There was no evidence that clean fleece weight was affected by staple style, staple tip score or staple entanglement score or lifetime factors such as birth weight, date of birth, birth parity, or weaning weight. The results show that using a combination of measuring MFD and visually assessing the fleece for staple length, staple definition and crimps can help identify the most profitable Angora goats. In this process, the objective measurement of MFD appears essential. Visual assessment will provide some extra benefit in identifying these animals above that provided by measuring MFD alone. Animal size should be considered by mohair producers when identifying more productive mohair producing animals. © 2014 Elsevier B.V.

Ionic conductivity and molecular dynamic behavior in supramolecular ionic networks; the effect of lithium salt addition

Supramolecular ionic networks combine singular properties such as self-healing behaviour and ionic conductivity. In this work we present an insight into the ionic conductivity and molecular dynamic behaviour of an amorphous and semicrystalline supramolecular ionic networks (iNets) that were synthesised by self-assembly of difunctional imidazolium dicationic molecules coupled with (trifluoromethane-sulfonyl) imide dianionic molecules. Relatively low ionic conductivity values were obtained for the semicrystalline iNet below its melting point (Tm =101°C) in comparison with the amorphous iNet for which the conductivity significantly increased (~3 orders of magnitude) above 100°C. Upon LiTFSI doping, the semicrystalline iNet reached conductivity values ~ 10-3 Scm-1 due to enhanced mobility of the network which was supported by solid-state static NMR. Furthermore, the overlapping of 19F and 7Li resonance lines from both the semicrystalline network and the LiTFSI suggests fast molecular motions.

Properties of HIV-1 associated cholesterol in addition to raft formation are important for virus infection

The overall HIV-1 membrane lipid contents resemble lipid rafts, and we have previously demonstrated that raft-promoting properties of virus-associated cholesterol (with modifications in either the 3β-OH group or AB rings) are important for HIV-1 infectivity. As cholesterol is present in both rafts and non-rafts domains of HIV-1 membrane, we question whether the interpretation of rafts property of virus-associated cholesterol being an absolute requirement for HIV-1 function is too simplistic. The carbon side chain of cholesterol is the third component of cholesterol that can affect the fluidity of membrane depending on its context within the lipid membrane bilayers. In this work, we have used synthetic cholesterol analogues that have different lengths of carbon side chain for our investigation. In contrast to our previous report, we have found that cholesterol side chain analogues that lack in vitro defined raft promoting-property is able to support HIV-1 replication. More specifically, cholesterol analogues with side chains of intermediate length have greater capacity to support HIV-1 infection, suggesting HIV-1 is able to maintain function using cholesterol variants that promote a range of non-rafts- to rafts-properties. Our data demonstrate cholesterol properties other than raft-promoting function also contribute to the infectivity of HIV-1.

The addition of depression to the Framingham Risk Equation model for predicting coronary heart disease risk in women

BACKGROUND: Depression is widely considered to be an independent and robust predictor of Coronary Heart Disease (CHD), however is seldom considered in the context of formal risk assessment. We assessed whether the addition of depression to the Framingham Risk Equation (FRE) improved accuracy for predicting 10-year CHD in a sample of women.

DESIGN: A prospective, longitudinal design comprising an age-stratified, population-based sample of Australian women collected between 1993 and 2011 (n=862).

METHODS: Clinical depressive disorder was assessed using the Structured Clinical Interview for Diagnostic and Statistical Manual of Mental Disorders (SCID-I/NP), using retrospective age-of-onset data. A composite measure of CHD included non-fatal myocardial infarction, unstable angina coronary intervention or cardiac death. Cox proportional-hazards regression models were conducted and overall accuracy assessed using area under receiver operating characteristic (ROC) curve analysis.

RESULTS: ROC curve analyses revealed that the addition of baseline depression status to the FRE model improved its overall accuracy (AUC:0.77, Specificity:0.70, Sensitivity:0.75) when compared to the original FRE model (AUC:0.75, Specificity:0.73, Sensitivity:0.67). However, when calibrated against the original model, the predicted number of events generated by the augmented version marginally over-estimated the true number observed.

CONCLUSIONS: The addition of a depression variable to the FRE equation improves the overall accuracy of the model for predicting 10-year CHD events in women, however may over-estimate the number of events that actually occur. This model now requires validation in larger samples as it could form a new CHD risk equation for women.

Development of hybrid composites for automotive applications: effect of addition of SEBS on the morphology, mechanical, viscoelastic, crystallization and thermal degradation properties of PP/PS-xGnP composites

In this article, we report on a simple and cost effective approach for the development of light-weight, super-tough and stiff material for automotive applications. Nanocomposites based on PP/PS blend and exfoliated graphene nanoplatelets (xGnP) were prepared with and without SEBS. Mechanical, crystallization and thermal degradation properties were determined and correlated with phase morphology. The addition of xGnP to PP/PS blend increased the tensile modulus at the expense of toughness. The presence of xGnP increased the enthalpy of crystallization and enthalpy of fusion of PP in the blends, without affecting segmental mobility and thermal stability. Addition of polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS) improved the toughness of PP/PS blends, but decreased the stiffness. The incorporation of xGnP into this ternary blend generated a super-tough material with improved stiffness and tensile elongation, suitable for automotive applications. It is observed that the presence of SEBS diminished the tendency of agglomeration of xGnP and their unfavorable interactions with thermoplastics, which in turn reduced the internal friction in the matrix.

Effects of combined silicon and molybdenum alloying on the size and evolution of microalloy precipitates in HSLA steels containing niobium and titanium

The effects of combined silicon and molybdenum alloying additions on microalloy precipitate formation in austenite after single- and double-step deformations below the austenite no-recrystallization temperature were examined in high-strength low-alloy (HSLA) steels microalloyed with titanium and niobium. The precipitation sequence in austenite was evaluated following an interrupted thermomechanical processing simulation using transmission electron microscopy. Large (~ 105 nm), cuboidal titanium-rich nitride precipitates showed no evolution in size during reheating and simulated thermomechanical processing. The average size and size distribution of these precipitates were also not affected by the combined silicon and molybdenum additions or by deformation. Relatively fine (< 20 nm), irregular-shaped niobium-rich carbonitride precipitates formed in austenite during isothermal holding at 1173 K. Based upon analysis that incorporated precipitate growth and coarsening models, the combined silicon and molybdenum additions were considered to increase the diffusivity of niobium in austenite by over 30% and result in coarser precipitates at 1173 K compared to the lower alloyed steel. Deformation decreased the size of the niobium-rich carbonitride precipitates that formed in austenite.

Addition of biological functionality to poly(epsilon-caprolactone) films

Biodegradable polyesters such as poly(epsilon-caprolactone) (PCL) have a number of biomedical applications; however, their usage is often limited by a lack of biological functionality. In this paper, a PCL-based polymer containing pendent groups activated by 4-nitrophenyl chloroformate (NPC) and reactive toward primary amines has been cast into thin films. The reactivity of the films toward poly(l-lysine) and the cell adhesion peptide, GRGDS, was assessed, and their cell adhesive capabilities were characterized. ATR-FTIR analysis found that NPC functional groups were present on the surface of the cast film, and the synthesis, conjugation, and visualization of a fluorescent molecule on these films further demonstrated the success of this functionalization methodology. The immersion of these films into a solution of either poly(l-lysine) (PLL) or GRGDS in PBS (pH 7.4) and subsequent 3T3 fibroblast adhesion studies demonstrated significant improvement in cell adhesion and spreading over films cast from unmodified PCL. This investigation has shown that this novel NPC-containing polymer can be utilized in many applications where increased cellular adhesion is required, or the coupling of specific molecules to polymer surfaces is of interest.

Addition of low concentrations of an ionic liquid to a base oil reduces friction over multiple length scales: a combined nano- and macrotribology investigation

The efficacy of ionic liquids (ILs) as lubricant additives to a model base oil has been probed at the nanoscale and macroscale as a function of IL concentration using the same materials. Silica surfaces lubricated with mixtures of the IL trihexyl(tetradecyl)phosphonium bis(2,4,4-trimethylpentyl)phosphinate and hexadecane are probed using atomic force microscopy (AFM) (nanoscale) and ball-on-disc tribometer (macroscale). At both length scales the pure IL is a much more effective lubricant than hexadecane. At the nanoscale, 2.0 mol% IL (and above) in hexadecane lubricates the silica as well as the pure IL due to the formation of a robust IL boundary layer that separates the sliding surfaces. At the macroscale the lubrication is highly load dependent; at low loads all the mixtures lubricate as effectively as the pure IL, whereas at higher loads rather high concentrations are required to provide IL like lubrication. Wear is also pronounced at high loads, for all cases except the pure IL, and a tribofilm is formed. Together, the nano- and macroscales results reveal that the IL is an effective lubricant additive - it reduces friction - in both the boundary regime at the nanoscale and mixed regime at the macroscale.

Microstructure and hardness evolution during simulated coiling of a direct strip cast low carbon low niobium steel

This paper examines the impact of coiling temperature and duration on the phase transformation and precipitation behavior of a low carbon and low niobium direct strip cast steel. Coiling was performed at three carefully chosen temperatures: (1) in the ferrite (600°C), (2) during the austenite decomposition (700°C) and (3) in the austenite (850°C). The coiling conditions were found to strongly affect the final microstructure and hardness response, thus highlighting the necessity to judiciously design the coiling treatment. Optical microscopy, and scanning and transmission electron microscopy were used to characterize the microstructural constituents (polygonal ferrite, bainite and pearlite) and the NbC precipitates. Vickers macrohardness measurements are utilized to quantify the mechanical properties. The differences in hardening kinetics for the three different temperatures are shown to come from a complex combination of strengthening contributions.