The effect of potential bias on the formation of ionic liquid generated surface films on Mg alloys

An electrochemical approach to the formation of a protective surface film on Mg alloys immersed in the ionic liquid (IL), trihexyl(tetradecyl)phosphonium–bis 2,4,4-trimethylpentylphosphinate, was investigated in this work. Initially, cyclic voltammetry was used with the Mg alloy being cycled from OCP to more anodic potentials. EIS data indicate that, under these circumstances, an optimum level of protection was achieved at intermediate potentials (e.g., 0 or 0.25 V versus Ag/AgCl). In the second part of this paper, a small constant bias was applied to the Mg alloy immersed in the IL for extended periods using a novel cell design. This electrochemical cell allowed us to monitor in situ surface film formation on the metal surface as well as the subsequent corrosion behaviour of the metal in a corrosive medium. This apparatus was used to investigate the evolution of the surface film on an AZ31 magnesium alloy under a potential bias (between ±100 mV versus open circuit) applied for over 24 h, and the film evolution was monitored using electrochemical impedance spectroscopy (EIS). A film resistance was determined from the EIS data and it was shown that this increased substantially during the first few hours (independent of the bias potential used) with a subsequent decrease upon longer exposure of the surface to the IL. Preliminary characterization of the film formed on the Mg alloy surface using ToF-SIMS indicates that a multilayer surface exists with a phosphorous rich outer layer and a native oxide/hydroxide film underlying this. The corrosion performance of a treated AZ31 specimen when exposed to 0.1 M NaCl aqueous solution showed considerable improvement, consistent with electrochemical data.

Single-walled carbon nanotubes with DNA recognition

Two methods for attaching DNA to oxidized single-walled carbon nanotubes either in organic solvent or aqueous solution are described. The sites of DNA attachment to the nanotubes have been verified by binding gold nanoparticles modified with DNA of complementary sequence to the DNA-modified nanotubes, and imaging with TEM. The gold nanoparticles appear on the tips of the nanotubes, and at isolated positions (defects) on the sidewalls. The methods provide versatility for the modification of nanotubes with DNA for their directed assembly, or for their composites with gold nanoparticles, into nanoscale devices.

Fast colorimetric detection of copper ions using L-Cysteine functionalized gold nanoparticles

This communication reports an efficient visual detection method of Cu²⁺ by L-cysteine functionalized gold nanoparticles in aqueous solution. Upon exposure to Cu²⁺, the gold nanoparticle solution changed from red to blue, in response to surface plasmon absorption of dispersed and aggregated nanoparticles. This colorimetric sensor allows a rapid quantitative assay of Cu²⁺ down to the concentration range of 10⁻⁵ M. Recognition of Cu²⁺ and formation of the aggregates are proposed to occur via a 2 : 1 sandwich complex between L-cysteine and Cu²⁺.

Architecture of macromolecular network of soft functional materials : from structure to function

An enhanced macromolecular nanofiber network and its implications have been developed by employing the understanding of its formation with an emphasis on its topological aspect. Using agarose aqueous solution as a typical example, the macromolecular nanofiber network of soft functional materials has been clearly visualized for the first time using the developed technique of field emission scanning electronic microscopy coupled with flash-freeze-drying. Both the systematic kinetic study and the image evidence indicates that the nanofiber network in soft functional materials such as agarose turns out to form through a self-expitaxial nucleation-controlled process. This new understanding enables us to engineer ultra functions of soft materials via nanofiber network architecture, which in turn opens up a new direction in nano fabrication.

Cloud-point extraction of phenanthrene by nonionic surfactants

Extraction and preconcentration of the model polycyclic aromatic hydrocarbon (PAH), phenanthrene, in aqueous solutions by two different kinds of nonionic ethoxylated alcohols, Tergitol 15-S-7 and Neodol 25-7, as extractants was studied at ambient temperature (22°C). Both surfactants have almost the same numbers of hydrocarbons and ethylene-oxide (EO) units, but differ in the location of the alcohols. Neodol 25-7 is a primary alcohol, while Tergitol 15-S-7 is a secondary one. The extraction process is based on the clouding phenomena of these two nonionic surfactants. Addition of sodium sulfate or sodium phosphate could decrease the cloud point temperatures of the surfactant solutions below the ambient temperatures, so that the cloud-point extraction process could be facilitated. Increasing the salt concentration or decreasing the surfactant concentration could improve the preconcentration factor, which is attributable to the decrease in the volume of surfactant-rich phase. Consequently, the recovery efficiency higher than 96% was achieved for phenanthrene in aqueous solution.

Optimization of polymerization conditions and thermal degradation of conducting polypyrrole coated polyester fabrics

PET fabric is coated with conducting polypyrrole (PPy) by oxidative polymerization from an aqueous solution of Py using ferric chloride hexahydrate (FeCl3) as oxidant and p-toluene sulphonate (pTSA) as dopant. The optimum concentrations for Py, FeCl3 and pTSA were found to be 0.11, 0.857 and 0.077 mol/l respectively, which yielded a conductive fabrics with resistivity as low as 72 Ω/sq. PPy fabric gained resistivity less than one order of magnitude when aged for 18 months at room temperature. The stabilizing effect of the dopant pTSA against thermal degradation was demonstrated; the undoped samples reached resistivity of around 40 kΩ, whereas doped samples reached less than 2 kΩ at the same temperature and time.

The origin of the antibacterial property of bamboo

Bamboo is an eco-friendly and multifunctional plant. Bamboo clothing has recently entered the textile market with a claim for its antimicrobial properties, but without scientific evidence. In this study, the antibacterial activity of plant extracts from Australian-grown bamboo (Phyllostachys pubescens) is investigated. Bamboo extracts were made using water, dimethyl sulphoxide (DMSO) and dioxane and their antibacterial properties were compared against Gram-negative bacteria, Escherichia coli. It was found that the extract made in 20% DMSO aqueous solution showed weak antibacterial activity, whereas the extract made using 90% dioxane aqueous solution exhibited strong antibacterial activity, even after 20 times dilution. The results indicate that antibacterial agents of P. pubescens are located in lignin, not in hemicellulose or other water-soluble chemical components.

Synthesis of ethyl acetate employing celite-immobilized lipase of Bacillus cereus MTCC 8372

A wide range of fatty acid esters can be synthesized by esterification and transesterification reactions catalyzed by lipases in non-aqueous systems. In the present study, immobilization of a purified alkaline extra-cellular lipase of Bacillus cereus MTCC 8372 by adsorption on diatomaceous earth (celite) for synthesis of ethyl acetate via transesterification route was investigated. B. cereus lipase was deposited on celite (77% protein binding efficiency) by direct binding from aqueous solution. Immobilized lipase was used to synthesis of ethyl acetate from vinyl acetate and ethanol in n -nonane. Various reaction conditions, such as biocatalyst concentration, substrates concentration, choices of solvents ( n -alkanes), incubation time, temperature, molecular sieves (3Å × 1.5 mm), and water activity(a _w ), were optimized. The immobilized lipase (25 mg/ml) was used to perform transesterification in n -alkane(s) that resulted in approximately 73.7 mM of ethyl acetate at 55 °C in n -nonane under shaking (160 rpm) after 15 h, when vinyl acetate and ethanol were used in a equimolar ratio (100 mM each). Addition of molecular sieves (3Å × 1.5 mm) as well as effect of water activity of saturated salt solutions (KI, KCl and KNO ₃ ) to the transesterification efficiency has inhibitory effect. Batch operational stability tests indicated that immobilized lipase had retained 50% of its original catalytic activity after four consecutive batches of 15 h each.

Azide photochemistry for facile modification of graphitic surfaces : preparation of DNA-coated carbon nanotubes for biosensing

A facile, two-step method for chemically attaching single-stranded DNA to graphitic surfaces, represented here by carbon nanotubes, is reported. In the first step, an azide-containing compound, N-5-azido-nitrobenzoyloxy succinimide (ANB-NOS), is used to form photo-adducts on the graphitic surfaces in a solid-state photochemical reaction, resulting in active ester groups being oriented for the subsequent reactions. In the second step, pre-synthesized DNA strands bearing a terminal amine group are coupled in an aqueous solution with the active esters on the photo-adducts. The versatility of the method is demonstrated by attaching pre-synthesized DNA to surfaces of carbon nanotubes in two platforms—as vertically-aligned multi-walled carbon nanotubes on a solid support and as tangled single-walled carbon nanotubes in mats. The reaction products at various stages were characterized by x-ray photoelectron spectroscopy. Two different assays were used to check that the DNA strands attached to the carbon nanotubes were able to bind their partner strands with complementary base sequences. The first assay, using partner DNA strands tethered to gold nanoparticles, enabled the sites of DNA attachment to the carbon nanotubes to be identified in TEM images. The second assay, using radioactively labelled partner DNA strands, quantified the density of functional DNA strands attached to the carbon nanotubes. The diversity of potential applications for these DNA-modified carbon-nanotube platforms is exemplified here by the successful use of a DNA-modified single-walled carbon-nanotube mat as an electrode for the specific detection of metal ions.

Cooling effect of MWCNT-containing composite coatings on cotton fabrics

Multiwalled carbon nanotubes (MWCNTs) were dispersed in an aqueous solution of epichlohydrin based resin with the aid of a surfactant. The MWCNT-resin solutions were applied onto cotton fabrics to form a thin coating with different MWCNT contents (0, 11.1, 20.0, 33.3, and 50%). The thermal conductivity of the fabrics was measured based on the Newton’s law of cooling. The coating containing 50% MWCNTs showed 151% increase in the thermal conductivity. Infrared thermography was used to characterize the heating/cooling behavior of the fabrics. On contact with a 50°C hot surface, coated fabric that had 50% MWCNTs in the coating layer showed a 3.9°C lower equilibrium surface temperature than the untreated fabric. The cooling rate increased with increasing the MWCNT content within the coating layer. Such an effective cooling performance was attributed to the increased thermal conductivity and surface emissivity of the MWCNT-containing coating layer. The coating showed little influence on water contact angle of the coated fabrics, but slightly decreased the air permeability.

Acceleration effect of reduced graphene oxide on photoinduced synthesis of silver nanoparticles

The photoinduced growth reaction of silver nanoparticles was accelerated by reduced graphene oxide (RGO) produced from graphene oxide (GO) during the light irradiation process in aqueous solution. X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy demonstrated that RGO was generated in the photoinduced process. The acceleration effect of RGO was investigated through monitoring the extinction spectra of silver nanoparticles during the synthesis process. Moreover, transmission electron microscopy (TEM) was employed to characterize the evolution of morphologies of silver nanoparticles at different irradiation times to demonstrate the effect of RGO. The results indicate that RGO accelerates the photoinduced synthesis of silver nanoparticles. It is proposed that the acceleration effect of RGO on the photoinduced reaction is attributed to the particular property of high electronic conductivity

Phase-structure effects of electrospun TiO2 nanofiber membranes on As(III) adsorption

TiO2 nanofibers (NFs) with different phases such as amorphous, anatase, mixed anatase?rutile, and rutile have been prepared by combining the electrospinning technique with the subsequent process of heat treatment or acidic-dissolution method. The obtained NFs are characterized by a Fourier transform infrared spectrometer (FT-IR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N2 adsorption?desorption isotherm measurements. Phase structure effects of electrospun TiO2 NFs on As(III) adsorption behaviors have been investigated. The results showed a significant effect of the phase structures of TiO2 NFs on As(III) adsorption rates and capacities. Amorphous TiO2 NFs have the highest As(III) adsorption rate and capacity in the investigated samples, which can be attributed to its higher surface area and porous volume. This research provides a simple and low-cost method for phasecontrolled fabrication of TiO2 NFs and application for effective removal of arsenic from aqueous solution.

Polystyrene-b-poly(oligo(ethylene oxide) monomethyl ether methacrylate)-bpolystyrene triblock copolymers as potential carriers for hydrophobic drugs

A simple and effective method is introduced to synthesize a series of polystyrene-b-poly(oligo(ethylene oxide) monomethyl ether methacrylate)-b- polystyrene (PSt-b-POEOMA-b-PSt) triblock copolymers. The structures of PSt-b-POEOMA-b-PSt copolymers were characterized by Fourier-transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (1H NMR) spectroscopy. The molecular weight and molecular weight distribution of the copolymer were measured by gel permeation chromatography (GPC). Furthermore£ the self-assembling and drug-loaded behaviours of three different ratios of PSt-b-POEOMA-b-PSt were studied. These copolymers could readily self-assemble into micelles in aqueous solution. The vitamin E-loaded copolymer micelles were produced by the dialysis method. The micelle size and core-shell structure of the block copolymer micelles and the drug-loaded micelles were confirmed by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The thermal properties of the copolymer micelles before and after drug-loaded were investigated by different scanning calorimetry (DSC). The results show that the micelle size is slightly increased with increasing the content of hydrophobic segments and the micelles are still core-shell spherical structures after drug-loaded. Moreover, the glass transition temperature (Tg) of polystyrene is reduced after the drug loaded. The drug loading content (DLC) of the copolymer micelles is 70%-80% by ultraviolet (UV) photolithography analysis. These properties indicate the micelles self-assembled from PSt-b- POEOMA-b- PSt copolymers would have potential as carriers for the encapsulation of hydrophobic drugs.

Solvent extraction and purification of sugars from hemicellulose hydrolysates using boronic acid carriers

Research was performed to determine whether it was technically feasible to use boronic acid extractants to purify and concentrate the sugars present in hemicellulose hydrolysates. Initially, five types of boronic acids (phenylboronic acid, 3,5-dimethylphenylboronic acid, 4-tert-butylphenylboronic acid, trans-β-styreneboronic acid or naphthalene-2-boronic acid) dissolved in an organic diluent (Shellsol® 2046 or Exxal® 10) containing the quaternary amine Aliquat® 336 were tested for their ability to extract sugars (fructose, glucose, sucrose and xylose) from a buffered, immiscible aqueous solution. Naphthalene- 2-boronic acid was found to give the greatest extraction of xylose regardless of which diluent was used. Trials were then conducted to extract xylose and glucose from solutions derived from the dilute acid hydrolysis of sugar cane bagasse and to then strip the loaded organic solutions using an aqueous solution containing hydrochloric acid. This produced a strip solution in which the xylose concentration had been increased over 7× that of the original hydrolysate while reducing the concentration of the undesirable acid-soluble lignin by over 90%. Hence, this process can be exploited to produce high concentration xylose solutions suitable for direct fermentation.

Protonated melonate Ca[HC6N7(NCN)3]·7H2O – synthesis, crystal structure, and thermal properties

Calcium hydrogenmelonate heptahydrate Ca[HC6N7(NCN)3]·7H2O was obtained by metathesis reaction in aqueous solution. The structure of the molecular salt was elucidated by single-crystal X-ray diffraction. The crystal structure consists of alternating layers of planar monopronated melonate ions, Ca2+ and crystal water molecules. The anions of adjacent layers are staggered so that no π–π stacking occurs. The melonate entities are interconnected by hydrogen bonds within and between the layers. Ca[HC6N7(NCN)3]·7H2O was investigated by solid-state NMR and FTIR spectroscopy, TG and DTA measurements.