Mechanical properties of polyether-plasticiser-salt systems as polymer electrolytes

The mechanical properties of urethane crosslinked poly(ethylene oxide-co-propylene oxide) glyceryl ether-plasticiser (tetraethylene glycol dimethyl ether, or methylformamide)-salt (LiClO₄)-based polymer electrolytes have been studied. It was found that, with increasing concentration of salt, the elastic modulus and tensile strength of the materials unexpectedly decrease. This is interpreted in terms of a predominance of intramolecular coordination of the Li⁺ ions by the polymer.

Effect of pore size on mechanical properties of titanium foams

In the study, both experimental work and numerical modeling are performed to investigate the pore size effects on the mechanical properties and deformation behaviours of titanium foams. Cylindrical titanium foam samples with different pore sizes are fabricated through powder metallurgy. Scanning electron microscope (SEM) is used to determine the pore size, pore distribution and the ratios of the length to width of pores. Compressive tests are carried out to determine the mechanical properties of the titanium foams with different pore sizes. Finally, finite element modeling is attempted to simulate the deformation behaviour and the mechanical properties of the titanium foams. Results indicate that titanium foams with different pore sizes have different geometrical characteristics, which lead to different deformation behaviours of cell walls during compression, resulting in different mechanical properties of titanium foams.

On the effective mechanical properties of fluid-saturated composites : a homogenization approach

Composites containing saturated fluid are widely distributed in nature, such as saturated rocks, colloidal materials and biological cells. In the study to determine effective mechanical properties of fluid-saturated composites, a micromechanical model and a multi-scale homogenization-based model are developed. In the micromechanical model the internal fluid pressure is generated by applying eigenstrains in the domain of the fluid phase and the explicit expressions of effective bulk modulus and shear modulus are obtained. Meanwhile a multi-scale homogenization theory is employed to develop the homogenization-based model on determination of effective properties at the small scale in a unit cell level. Applying the two proposed approaches, the effects of the internal pressure of hydrostatic fluid on effective properties are further investigated.

Effect of isothermal dissolution and re-precipitation of austenite on the mechanical properties of duplex structures

The hot deformation behaviour of a duplex ferritic/austenitic stainless steel was studied after different deformation conditions. The results showed a strange and interesting behaviour in the strength of the material during post-deformation studies. For most deformation conditions, the flow stress of the material was un-expectedly increased after annealing of deformed structures. This phenomenon implied that microstructural hardening occurred in the material during the interpass annealing rather than the expected softening. Also, an interesting change was observed where the morphology of the austenite phase changed from stringers or layers of austenite to a widmanstätten structure. The microstructural studies suggest that the austenite was dissolved and re-precipitated during the annealing process and the hardening was mostly associated with the change in the morphology of austenite.

Structure and mechanical properties of asymmetrically rolled IF steel sheet

As-received hot-rolled 5.6 mm thick IF steel sheet was symmetrically/ asymmetrically cold rolled at room temperature down to 1.9 mm. The asymmetric rolling was carried out in monotonic (an idle roll is always on the same side of the sheet) and reversal (the sheet was turned 180° around the rolling direction between passes) modes. Microstructure, texture and mechanical properties were analysed. The observed differences in structure and mechanical properties were modest, and therefore further investigation of the effects of other kinds of asymmetry is suggested.

Mechanical properties of Al and Mg alloy welds made by friction stir lap welding

The unfavourable effect of hooking or softening, respectively, on fracture strength of joints made using friction stir lap welding (FSLW) is known but the combined effect on the magnitude of strength reduction is not clear. In this study, FSLW experiments using AA6060-T5 and AZ31B-H24 alloys were conducted. For both alloys, rotation speed has a dominant effect on increasing the hook size due to increasing the stir flow volume thus lifting more the original lapping surfaces. In AA6060 welds, FS softening has limited the strength, when hook size approaches zero. Meanwhile hook starts to reduce the strength significantly, when its size reaches a critical value. The maximum strength of AA6060 FSL welds reaches ~ 70% of the base metal UTS when hook size approaches zero. This is in contract to ~30% for AZ31B FSL welds. This can be explained by the local plastic deformation behaviour during lap tensile testing.

Improving the dispersion and mechanical properties of epoxy/carbon nanotube composites

The incorporation and uniform dispersion of carbon nanotubes (CNTs) in polymer matrix could facilitate engineers to create high performance nanocomposites that potentially compete with most advanced materials in nature. The unique combination of outstanding mechanical, thermal, and electrical properties of CNTs makes them excellent nanofillers for the fabrication of advanced materials. Successful enhancement in mechanical properties via reinforcement is expected only when the nanofillers are well dispersed in the polymer matrix. Moreover, the orientation as well as the CNT/matrix interfacial strength also determines the effective physical properties of the nanocomposites. However, CNTs typically assemble to give bundles, which are heavily entangled to each other with a high aspect ratio and a large π-electronic surface. In this work, we outline some preliminary results in preparing high performance epoxy composites. Composites with fine dispersion and superior mechanical properties were prepared using epoxy and multiwalled carbon nanotubes (MWCNTs). The fine dispersion of the nanocomposites can be identified in the high resolution SEM image shown in Figure 1. This method can provide an alternative route for the preparation of new structural and functional nanocomposites.