Overweight children have poor bone strength relative to body weight, placing them at greater risk for forearm fractures

Introduction: Obesity is thought to be a protective factor for bones in adults but not in children based on the evidence of the greater incidence of forearm fractures in obese children. Our objective was to investigate the effect of adiposity on bone strength in relation to the mechanical challenge placed onto the forearm bones in case of a fall.

Methods: Cross sectional areas (CSA) were obtained at the mid- and distal radius by peripheral quantitative computed tomography in 486 children (241 boys), mean age 8.3 years (range 6.9–9.7), participating in the LOOK Project. The following parameters were measured: bone mass and bone CSA (both sites), and muscle and fat CSA (mid-forearm only). Bone strength indices combining bone size and total volumetric density were calculated at each site.

Results/Discussion: Overweight children (BMI > percentile equivalent to 25 kg/m² in adults) have higher bone parameters than normal-weight peers (Z-scores +0.6 to +0.9SD, p < 0.0001). These differences disappear after adjustment for muscle CSA. Adiposity (fat CSA/muscle CSA) was negatively correlated with bone mass, size and strength at the distal radius only (r = −0.1, p < 0.05). After adjustment for body weight (estimate of the load during a fall), the negative correlations were stronger and observed at both the mid- and distal radius (r = −0.37 to −0.55, p < 0.0001).

Conclusion. Overweight children have stronger bones due to greater muscle size. However, children with high fat mass relative to muscle mass (increased adiposity) have poorer bone strength, independent of weight, which may contribute to the increased risk of fracture in obese children.

Challenges of negotiating obesity-related findings with African migrants in Australia : lessons learnt from the African migrant capacity building and performance appraisal project

Aim: To document sub-Saharan African migrants' and teachers' reaction to and acceptance of findings from African Migrant Capacity Building and Performance Appraisal initiative, and to examine the implications for any community-based obesity prevention program.

Methods: Two community forums were organised to discuss the research findings: one with 45 African community leaders from various African communities in Melbourne; and the other with 17 primary and secondary teachers from English Language Schools and Centres across Victoria. The dissemination focused on highlighting the rapid weight gain and obesity risks observed among African migrant children.

Results: Sub-Saharan African migrants' reaction to the findings was that of pride and satisfaction with large body size, seeing it as a job well done, reflecting their perceptions that obesity is not a disease. In addition, they highlighted the intergenerational conflict related to body size ideals between parents and teenage offspring, with the latter preferring model-like Australian body sizes.

Conclusion: Further research is required to examine the association between shifting preferences in body ideals and obesity among traditional communities, such as sub-Saharan African migrants. The understanding of how changes in body image perceptions may influence eating and exercise behaviours among sub-Saharan African migrants would assist in the development of obesity-related preventive interventional programs for this at-risk population.

Predictors of body mass index change in Australian primary school children

Objective. To assess associations between multiple potential predictors and change in child body mass index (BMI). Methods.In the 1997 Health of Young Victorians Study, children in Grades preparatory to three (aged 510 years) had their height and weight measured. Parents provided information on potential predictors of childhood overweight across six domains (children’s diet, children’s activity level, family composition, sociodemographic factors, prenatal factors and parental adiposity). Measures were repeated three years later in 2000/1. BMI was transformed to standardised (z) scores using the US 2000 Growth Chart data and children were classified as non-overweight or overweight according to international cutpoints.Regression analyses, including baseline BMI z-score as a covariate, assessed the contribution of each potential predictor to change in BMI z-score, development of overweight and spontaneous resolution of overweight in 1 373 children.Results. BMI z-score change was positively associated with frequency of take-away food, food quantity, total weekly screen time, non-Australian paternal country of birth, maternal smoking during pregnancy, and maternal and paternal BMI.Inverse associations were noted for the presence of siblings and rural residence (all pB0.05). Predictors of categorical change (development and resolution of overweight) were less clearly identified, apart from an association between maternal BMI and overweight development (p0.02). Multivariable models suggested individual determinants have a cumulative effect on BMI change. Conclusions. Strong short-term tracking of BMI makes it difficult to identify predictors of change. Nonetheless, putative determinants across all domains assessed were independently associated with adiposity change. Multi-faceted solutions are likely to be required to successfully deal with the complexities of childhood overweight.

The lifestyle of our kids (LOOK) project : outline of methods

This methods paper outlines the overall design of a community-based multidisciplinary longitudinal study with the intent to stimulate interest and communication from scientists and practitioners studying the role of physical activity in preventive medicine. In adults, lack of regular exercise is a major risk factor in the development of chronic degenerative diseases and is a major contributor to obesity, and now we have evidence that many of our children are not sufficiently active to prevent early symptoms of chronic disease. The lifestyle of our kids (LOOK) study investigates how early physical activity contributes to health and development, utilizing a longitudinal design and a cohort of eight hundred and thirty 7–8-year-old (grade 2) school children followed to age 11–12 years (grade 6), their average family income being very close to that of Australia. We will test two hypotheses, that (a) the quantity and quality of physical activity undertaken by primary school children will influence their psychological and physical health and development; (b) compared with existing practices in primary schools, a physical education program administered by visiting specialists will enhance health and development, and lead to a more positive perception of physical activity. To test the first hypothesis we will monitor all children longitudinally over the 4 years. To test the second we will involve an intervention group of 430 children who receive two 50 min physical education classes every week from visiting specialists and a control group of 400 who continue with their usual primary school physical education with their class-room teachers. At the end of grades 2, 4, and 6 we will measure several areas of health and development including blood risk factors for chronic disease, cardiovascular structure and function, physical fitness, psychological characteristics and perceptions of physical activity, bone structure and strength, motor control, body composition, nutritional intake, influence of teachers and family, and academic performance.

Towards the development of a conceptual design management model for remote sites

Remote and environmentally sensitive sites present unique challenges for participants involved in the design and construction process. Worldwide advances in information technology coupled with improved site accessibility and manageability has enabled the construction industry to undertake such projects with greater ease. Furthermore, research on information technology in construction has begun to focus our attentions on our increased ability to work virtually in distributed teams. These remote sites have a range of development potential as clients have varied interests including; tourism, scientific investigation and resource exploration and processing which impact upon the management of the design process. These sites pose unique challenges to the project teams and in particular for the management of project design. The conceptual design phase is often marked by an iterative and creative process, which tends to be a sociologically oriented world where designers respond to a range of functional, aesthetic, environmental and even spiritual concerns. Strategic decisions made during the briefing and conceptual design stage may impact upon construction logistics and sustainability. Detailed design for construction tends to be a production oriented world. There is a significant body of literature that addresses the application of lean thinking to improving the interface between detailed design and construction production. There is little literature that takes a holistic view of design management for remote sites. The lean design management field of research has much to contribute to the design management of these projects. The review of the literature indicated that much of the lean thinking has been primarily concerned with sequential production. However, lean thinking is based upon principles of flow and value, which is also conducive to the complex process involved in design management for remote sites. A conceptual model is developed that considers both the production and sociological approaches to design management, in response to the peculiar demands of the site and their project teams.

The development of 'soft' strategic indicators for international client satisfaction

Despite the increasing significance of the construction industry as an emerging sector of the Australian economy, there is inadequate research performed on construction design firms in terms of theoretical and empirical foundations. Although past research has identified the barriers and success factors for firm market entry, evidence suggests that to date no research has explicitly explored the sustainability of construction design firms in international markets. SMEs and their approach to firm internationalisation differ significantly from large manufacturing firms and a vast majority of construction design firms operate as SMEs. This paper develops a sustainable business model for construction design SMEs, which rely upon the development of clear Client Following (CF) versus Market Seeking (MS) strategies to support internal firm strategic and operational management. The understanding of these strategies is vital as the application of either will shape the design management approach of firms, which would in turn impact on the sustainability of these firms in foreign markets. Long-term sustainability of firms in international markets relies heavily upon client satisfaction. Client and project team participants’ communication during various design processes has often been problematic and the added difficulty of communicating across international boundaries further compounds the problem of capturing and maintaining client’s requirements. Therefore this paper develops a model for business sustainability of Australian construction design firms working in international markets by exploring factors that affect client satisfaction across international boundaries, through the development of business performance indicators. These include not only the critical financial capital but also other ‘softer’ indicators, namely: social, cultural and intellectual capital. These act as a firm’s measure of success and the acquisition of this type of capital will provide significant advantages to firms’ success, hence sustainability in international markets.

A measurement framework for international entrepreneurship policy research : from impossible index to malleable matrix

The Global Entrepreneurship Monitor (GEM), a multifaceted, multinational research programme now in its seventh year of field operation, currently dominates the field of international entrepreneurship policy research but faces a crisis of credibility. Despite having created and continuing to develop a very rich database capable of addressing many of the complexities requisite for understanding entrepreneurship at the national and international levels of analysis, GEM has chosen to disguise the depths of its potential research and policy utility through a misnamed quest for unobtainable simplicity at the centre of the project and a disorganised variety of report presentations at the periphery. Subsequent to a review of the entrepreneurial definitional literature and a resolution of its many themes into six components of entrepreneurial activity, based on Penrose's (1959/1995) articulation of the practical meaning of 'entrepreneurial services', this paper suggests that a 'malleable matrix' approach can provide a practical measurement framework capable of reporting national entrepreneurial activity in a structure that is comprehensive without being overwhelming.

Practice into theory : working collaboratively with clinicians to articulate mental health triage practice

Learning objectives: To contribute to mental health nurses understanding and knowledge of mental health triage practice through the presentation of current research findings on the topic. A specific focus of the paper will be an overview of how mental health triage practice differs across the lifespan.

Mental health triage is a highly specialised area of clinical practice for mental health nursing that is in its infancy in terms of articulating practice and theory. This paper addresses the conference theme of mental health nursing practice: new roles, new challenges by presenting the findings of a qualitative research project that investigated mental health triage/duty/intake practices across the five community mental health agencies of The Alfred Hospital, Melbourne. The overall aim of the project was to work collaboratively with clinicians to further develop the quality and consistency of mental health triage, duty, and intake clinical practice across all arms of Alfred Psychiatry. The project was designed to facilitate the expansion of the mental health triage knowledge base, and thus contribute to the further development of triage clinical practice. One of the unique aspects of the project was its triangulation across the adult triage service (acute), the two Continuing Care Teams, and the specialist psychiatric services such as the Child and Adolescent Mental Health Service, the Homeless and Outreach Psychiatric Service, and the Mobile Aged Psychiatric Service. The project employed focus group method to collect in-depth, qualitative data. A series of nine focus groups were conducted at each site, which concentrated on eliciting data on the core areas of mental health triage practice such as telephone consultation skills, mental status examination, risk assessment, decision-making, negotiation, crisis assessment, secondary consultation, and documentation. The investigation produced a considerable amount of high quality, in-depth data that was analysed using content analysis methods. The project produced data that will make a significant contribution to the expanding body of knowledge on mental health triage practice.

The Pacific OPIC Project (Obesity Prevention In Communities) : action plans and interventions

Background: The Pacific OPIC Project (Obesity Prevention In Communities) includes whole-of-community intervention programs in four countries (Fiji, Tonga, New Zealand, Australia) aimed at reducing the prevalence of overweight and  obesity in youth.

Development of Action Plans: At each intervention site, preliminary interviews  were conducted with youth to identify the potential socio-cultural barriers and  facilitators to healthy eating and regular physical activity in order to attain and sustain a healthy body size. This and other information was presented at a 2-day workshop with community stakeholders, including youth. The participants then prioritised the components for a draft action plan which was later consolidated through further community consultation.

Action Plan objectives: Each action plan had two overall aims: to build  community capacity and to promote healthy weight. The first three objectives in each action plan were on capacity building, social marketing messages, and evaluation. Next were a set of four to five behavioural objectives with associated strategies involving programs, events, social marketing and environmental  change. Lastly, each site had one or two innovative or developmental objectives.

Progress: Interventions began in all sites from 2005, with the action plans guiding implementation priorities. The initial behavioural objective for targeting in Fiji was eating regular breakfast and meals throughout the day, for Tonga it was physical activity, and for Australia and New Zealand it was increasing water consumption and decreasing consumption of sweet drinks.

Conclusions: The action plans have provided the basis for community engagement in the project, the guide to the implementation of activities and the template for the evaluation plan.

Experience with practical project based learning in a developing undergraduate engineering degree program

The use of practical learning experience in undergraduate degree programs offers students the opportunity to apply their knowledge and receive feedback in a supportive environment before entering the workplace or undertaking further study. Traditional laboratory based instruction allows students this opportunity; however, it tends to provide limited opportunity for students to explore creative solutions to problem solving. The University of Waikato recently established undergraduate degree programs in engineering and has aimed to incorporate flexible learning opportunities for students, as part of their degree and as extra-curricular activities. This paper presents some of the practical project based opportunities that have been adopted and examines the role these have played in a developing engineering program.

Remaking the body : explorations in the sociology of embodiment

As embodied social agents our lives are preoccupied with the production and reproduction of bodies. Making, unmaking and remaking our embodiment are ongoing activities. Eating, exercise, washing, grooming, dressing, for example, are activities in which the body engages in routine tasks of bodily management. Such activities can be seen as everyday rehabilitation. The study explores the impact of major physical impairment on embodiment, and on the processes involved in re-embodiment after catastrophic injury or disease. The experiences of the people in this study dramatically highlight the continuous, but largely taken for granted processes involved in our embodiment. Four analytical strands are interwoven throughout the study. The first strand relates to the frailty and vulnerability of the human body, characteristics which are epitomised by the bodies of the informants in this study. The second strand engages with key aspects of the context in which re-embodiment takes place, namely a context replete with crisis, danger, fear, uncertainty and risk. The third strand projects into the future in considering the ongoing project of self. The fourth strand addresses the institutional and social impediments which may confine vulnerable bodies and limit the exploration of more expansive bodies. The study is situated within the general theoretical approach of the sociology of the body. While recognizing the powerful impact of social discourse in the production of bodies, the study focuses on the critical role of embodiment in the reconstitution of self. The people in this study have experienced profound bodily change, but although this damage has disrupted, it has not annihilated their embodied selves. The people still possess and occupy their bodies. It is the obduracy of embodiment which directs the processes involved in remaking the body.

Does Australia's treatment of non-citizens accord with its international human rights obligations? with specific reference to the treatment of on-shore refugees

The son of immigrants, I was motivated to write a paper addressing the issues of alienation and discrimination which confronts non-citizens upon arriving in Australia. Apart from descendants of Australia's indigenous population, the common bond shared by all citizens and permanent residents of Australia is that they are either themselves immigrants or are descended from immigrants. In this paper I will look at whether Australia's law and practice meets its international human rights treaty and convention obligations vis-a-vis non-citizens. To investigate this issue I trace the history of immigration to Australia and look at the political policies which influenced the treatment of non-citizens from 1788 to present times. In 1958 when my parents stepped upon Australian soil as displaced persons, Australia was a very different place from Australia in the 1990s. At that time Australia was still firmly under the influence of the 'White Australia Policy' which openly encouraged discrimination against non-anglo saxons. Since those times Australia has advanced to become one of the most culturally diverse nations in the world where multiculturalism is encouraged and a non-discriminatory immigration program is supported by both Australia's major political parties. However, notwithstanding the great social advances made in Australia in recent decades the traditional legal sources of law, namely, judicial pronouncements, statutes and the Commonwealth Constitution have not kept pace and it is my submission that Australia's body of law inadequately protects the rights of non-citizens when compared to Australia's international human rights convention and treaty obligations. This paper will consider these major sources of law and will investigate how they have been used in the context of the protection of the rights of non-citizens. It will be asserted that the weaknesses exposed in the Australian legal system can be improved by the adoption of a Bill of Rights1 which encompasses Australia's international human rights treaty and convention obligations. It is envisaged that a Bill of Rights would provide a framework applicable at the State, Territory and Federal levels within which issues pertaining to non-citizens could be resolved. The direction of this thesis owes much to the writings, advice and supervision of Dr. Imtiaz Omar who was always available to discuss the progress of this work. Dr. Omar is a passionate advocate of human rights and has been a tremendous inspiration to me throughout my writing. I owe a debt of thanks to the partners of Coulter Burke who with good nature ignored the sprawl of books and papers on the boardroom table, often for days at a time, thus enabling me to return to my writing from time to time as my inspirational juices ebbed and waned. Thanks also go to my typists Julie Pante, Vesna Dudas and Irene Padula who worked after hours and on weekends always without complaint, on the various versions of this thesis. My final acknowledgement goes to my wife Paula who during the years that I was working on this thesis encouraged me during my darker moments and listened to all my frustrations yet never doubted that I would one day complete the task successfully. I wish to thank her wholeheartedly for her motivation and belief in my abilities. The law relied upon in the thesis is as at the 30th June, 1998. Bill or Charter of Rights 'are taken to be enactments which systematically declare certain fundamental rights and freedoms and require that they be respected'. See Evans, G. 'Prospect and Problems for an Australian Bill of Rights' (1970) 3 Australian Year Book of International Law 1 at 16. Some such notable exception is the New Zealand Bill of Rights Act 1990, contained in an ordinary statute.

Determination of human body composition

This thesis deals with two electrical methods designed to enable rapid, safe and noninvasive measurement of body composition, both for clinical and community use. The first section provides a review of the literature related to measurement of body composition in humans and outlines the approach of the research project. The second section deals with established methods of determining body composition, the two most important being hydrostatic densitometry and deuterium oxide dilution. In this part of the report, a novel method for measuring lung volume by hydrogen dilution at the time of underwater weighing is described. The main findings of the thesis are contained in the third section which deals with the assessment of body opposition by electrical means. There are two components to this part of the study. The first involved the testing of a commercially available bioelectric impedance analyser (BIA) which measures impedance to a flow of current through the body. Studies on the reproducibility and reliability of measurements were performed. Results showed the importance of correct electrode placement and revealed that subjects can consume a light meal and a drink before being measured with the BIA without adversely affecting impedance readings. Results suggested, however, that subjects empty their bladders before measurements are made. Strong correlations were found between height 2/ resistance and measurements of total body water (r = 0.839) and fat-free weight derived from densitometry (r = 0.821), Moderate correlations (r = 0.6 to 0.7) were also found when height /resistance was related to fat-free weight derived from anthropometric measurements. The second and major consonant of the third section deals with the development of a method based on the absorption of energy from a weak electromagnetic field established in a capacitor or chamber large enough to accommodate an adult human subject. The method involves measurement of the effect of the body on the electromagnetic field, and is based on differential absorption of energy by body fat and fat-free tissues. Regression equations were developed for predicting the weight of fat and fat-free tissue in the body from measurement of electromagnetic field effects in a test capacitor and in a resonating chamber. The test capacitor comprised a large aluminum cylinder with a copper rod as a central conductor. The following equation was derived for the relationship of fat-free weight (FEW) based on body density, with measurements of change in resonant frequency (ΔfR), height (H) and weight (W) : FFW = -4.39 + 0.690 W + 19.9 H + 37.6 ΔfR In a study of 17 subjects, a value of 0.891 was found for R2, and S.E.E. was 1.63. The resonating chamber consisted of a large enclosed aluminium cylinder with a copper rod as a central conductor. The following equation was derived for the relationship of fat weight (FW) based on the mean of estimates from body density and total body water, with measurements of change in signal attenuation (ΔA), change in resonant frequency (ΔfR), and height (H) and weight (W) : FW = 73.48 + 0.291 (W/√(ΔA) - 49.2 H - 0.53 ΔfR In a study of 27 subjects, a value of 0.956 was found for R2, and S.E.E. was 1.97. In these equations, variables were measured in the following units : FEW, FW and W (kg), ΔfR (MHz) and H (m).