aTrance encounter short

An electronic composition in the genre of Trance . . . a synth delight with some vocals used as beats.

aTrance encounter stinger

An electronic composition in the genre of Trance . . . a synth delight with some vocals used as beats.

Clarification and concentration of sugar cane juice through ultra, nano and reverse osmosis membranes

The performance of ultrafiltration (UF) membranes with molecular weight cut off (MWCO) of 1000 and 3500 Da in clarifying sugar cane juice was investigated, as well as the performance of a nanofiltration (NF) membrane with MWCO of 200 Da and a reverse osmosis (RO) membrane in concentrating sugar cane juice. For both cases the sugar cane juice had been limed and partially clarified. The UF membranes were found to be effective at clarifying the sugar cane juice in terms of purity rise and reduction in turbidity, colour, starch and protein. A purity rise of approximately 6 was achieved by both UF membranes at trans-membrane pressures (TMP) from 15 to 25 bar. However, Brix reduction in the permeate was between 14.5 and 41.85% and 12.11 and 26.52% for 1000 Da and 3500 Da membranes respectively. For the 200 Da and RO membranes the Brix in the concentrate was increased from 7.65 to 12.3 after 3 hours of operation for the 200 Da membrane at a TMP of 10 bar, whilst the Brix in the concentrate was increased from 15.65 to 27.6 after 3 hours of operation for the RO membrane at a TMP of 35 bar. Overall, UF membranes were found to be unsuitable for clarification of sugar cane juice since significant amount of Brix is reduced in the permeate, whilst RO membranes were found to be effective for concentration of sugar cane juice.

Multimodal theatre experiences : Africa and 2 dimensional life of her

Australia’s theatre for young audiences (TYA) has concentrated on young people’s interest in techno-savvy narrative complexities since the early 1990s, and has done so with positive outcomes. Building from a reflective inquiry, which is based on a TYA practitioner’s viewpoint, I explore two Australian contemporary theatre productions for mixed audiences: My Darling Patricia’s Africa (2011) and Fleur Elise Noble’s 2 Dimensional Life of Her (2011), which utilize old and new technologies for differing purposes. I present the following article in two parts: The first section briefly contextualizes TYA plays in Australia using digital technologies, along with a review of the literature that introduces an ongoing dialogue about digital media in theatre. The second part showcases the creative development process and the synopsis of Africa and 2 Dimensional Life of Her before I discuss the use of old technology in Africa in the form of a techno-tele-character, and the impact of new technologies in 2 Dimensional Life of Her as a transmediated theatrical occurrence. Recommendations are made for ways that TYA practitioners might consider mixing old and new technologies with the live to compete in the cultural marketplace.

Nonlinear large deformation dynamic analysis of electroactive polymer actuators

Electroactive polymers have attracted considerable attention in recent years due to their sensing and actuating properties which make them a material of choice for a wide range of applications including sensors, biomimetic robots, and biomedical micro devices. This paper presents an effective modeling strategy for nonlinear large deformation (small strains and moderate rotations) dynamic analysis of polymer actuators. Considering that the complicated electro-chemo-mechanical dynamics of these actuators is a drawback for their application in functional devices, establishing a mathematical model which can effectively predict the actuator's dynamic behavior can be of paramount importance. To effectively predict the actuator's dynamic behavior, a comprehensive mathematical model is proposed correlating the input voltage and the output bending displacement of polymer actuators. The proposed model, which is based on the rigid finite element (RFE) method, consists of two parts, namely electrical and mechanical models. The former is comprised of a ladder network of discrete resistive-capacitive components similar to the network used to model transmission lines, while the latter describes the actuator as a system of rigid links connected by spring-damping elements (sdes). Both electrical and mechanical components are validated through experimental results.

Monitoring corrosion of reinforced concrete beams in a chloride containing environment under different loading levels

Corrosion has significant adverse effects on the durability of reinforced concrete (RC) structures, especially those exposed to a marine environment and subjected to mechanical stress, such as bridges, jetties, piers and wharfs. Previous studies have been carried out to investigate the corrosion behaviour of steel rebar in various concrete structures, however, few studies have focused on the corrosion monitoring of RC structures that are subjected to both mechanical stress and environmental effects. This paper presents an exploratory study on the development of corrosion monitoring and detection techniques for RC structures under the combined effects of external loadings and corrosive media. Four RC beams were tested in 3% NaCl solutions under different levels of point loads. Corrosion processes occurring on steel bars under different loads and under alternative wetting - drying cycle conditions were monitored. Electrochemical and microscopic methods were utilised to measure corrosion potentials of steel bars; to monitor galvanic currents flowing between different steel bars in each beam; and to observe corrosion patterns, respectively. The results indicated that steel corrosion in RC beams was affected by local stress. The point load caused the increase of galvanic currents, corrosion rates and corrosion areas. Pitting corrosion was found to be the main form of corrosion on the surface of the steel bars for most of the beams, probably due to the local concentration of chloride ions. In addition, visual observation of the samples confirmed that the localities of corrosion were related to the locations of steel bars in beams. It was also demonstrated that electrochemical devices are useful for the detection of RC beam corrosion.

Time use clusters of New Zealand adolescents are associated with weight status, diet and ethnicity

OBJECTIVE: To describe New Zealand adolescent time use clusters and correlate cluster profiles. METHODS: Data were from the cross-sectional 2008/2009 National Survey of Children and Young People's Physical Activity and Dietary Behaviours, which surveyed a random sample of 10-16 year-old New Zealanders (study subset n=679). Time use data were collected using the Multimedia Activity Recall for Children and Adults, and collapsed into 17 age-adjusted variables for sex-specific cluster analysis. Cluster associations with socio-demographic, anthropometric, physical activity and dietary variables were analysed. RESULTS: Three time use clusters were discovered for both boys and girls. For boys, the Techno-active cluster was characterised by high levels of team sports and TV; the Quiet movers cluster by transport (active and passive) and quiet time; and the Social studious cluster by reading, study activities and social interaction. The boys' clusters were associated with ethnicity. The girls'Social sporty cluster was characterised by sports and social interaction; the Screenie tasker cluster by TV, computer, chores and work; and the Super studious cluster by reading, study and school-based activities. The girls' time use cluster membership was associated with weight status and serves of extra foods. CONCLUSIONS: Distinct sex-specific time use clusters and correlate profiles exist among NZ adolescents. IMPLICATIONS: These findings may assist the development of targeted time use interventions to improve adolescent health and well-being.

Evaluation of numerical procedures to determine seismic response of structures under influence of soil-structure interaction

In this study, the accuracy and reliability of fully nonlinear method against equivalent linear method for dynamic analysis of soil-structure interaction is investigated comparing the predicted results of both numerical procedures with the results of experimental shaking table tests. An enhanced numerical soil-structure model has been developed which treats the behaviour of the soil and the structure with equal rigour. The soil-structural model comprises a 15 storey structural model resting on a soft soil inside a laminar soil container. The structural model was analysed under three different conditions: (i) fixed base model performing conventional time history dynamic analysis, (ii) flexible base model (considering full soil-structure interaction) conducting equivalent linear dynamic analysis, and (iii) flexible base model performing fully nonlinear dynamic analysis. The results of the above mentioned three cases in terms of lateral storey deflections and inter-storey drifts are determined and compared with the experimental results of shaking table tests. Comparing the experimental results with the numerical analysis predictions, it is noted that equivalent linear method of dynamic analysis underestimates the inelastic seismic response of mid-rise moment resisting building frames resting on soft soils in comparison to the fully nonlinear dynamic analysis method. Thus, inelastic design procedure, using equivalent linear method, cannot adequately guarantee the structural safety for mid-rise building frames resting on soft soils. However, results obtained from the fully nonlinear method of analysis fit the experimental results reasonably well. Therefore, this method is recommended to be used by practicing engineers.

Enterprise resource planning and the post bureaucratic organization

Purpose – The purpose of the paper is to use a case study setting involving the implementation of an enterprise resource planning (ERP) system to expose and analyze the conflicts in the characterizations of the post bureaucratic organisation (PBO) in the literature. ERP implementations are often accompanied by increasing levels of stress in organizations that place pressures on organizational relationships and structures. Additionally, ERPs are regarded as introducing their own techno-logic of centralization, standardization and formalization that provides an apparent contrast to the exhortations about employee empowerment.Design/methodology/approach – A case study of ERP implementation in a medium-sized entity is presented. The paper explores aspects of ERP and PBO from the context of postmodern organization theory.Findings – Some concerns about PBO identified in the literature are reflected in the case situation. For example, there is a commitment to give up private time and work flexibly by some employees. The paper also provides evidence of the way the management team substitute their reliance on a key individual knowledge worker for that of an ERP system and external vendor support. Paradoxically, trust in that same knowledge worker and between core users of the system is essential to enable the implementation of the system.