Potential of textile hemp in biomedical and composite applications

The fabrication of hemp fine powder was documented for the first time. The antibacterial properties of hemp powders and hemp plant extracts from textile hemp were investigated for the first time. Fabrication and characteristics of hemp powder blended polypropylene polymer composite filaments were investigated for the first time.

Performance comparison of abrasion resistant textile motorcycle clothing

 Falling at speed onto a tarmac surface during cycling can cause abrasion and laceration of the skin and body tissue. Motorcycle clothing designed to reduce or avoid this type of injury has traditionally been made of animal leather as it has well known resistance to abrasion. In the last 20 years there has been an emergence of textile clothing reinforced with high performance/tenacity fibres such as those made from polyamides, aramids, ultra high molecular weight polyethylene and liquid crystal. Almost no comparative work has been undertaken to provide insight into the level of protection these clothing layers can provide.
This work has used a CE standard test method to evaluate a number of abrasion resistant textile pant products and compare them with a leather race product. It analysed the protective fabric layer structure for mass, thickness, construction method and resistance to abrasion.
Structures manufactured from high tenacity fibres performed better than those from lower tenacity ones. Fabric construction method and mass per unit area were the two key variables in providing an abrasion protective layer. Structures manufactured from knitted para-aramid fibres performed better than their woven counterparts due to the method of fabric failure. Several well designed protective layers performed at a similar level to that of leather; however, most garments tested failed to meet the lower level European standard of abrasion resistance (CE level 1), which may put their wearer at risk in the advent of a collision.

Additive manufacturing technologies : 3D printing, rapid prototyping, and direct digital manufacturing

This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.

Photochromic fabrics with improved optical performance

 Photochromism is a fascinating phenomenon which has attracted much commercial interest for applications including sunglasses, optical devices such as memories and switches, and security printing. Photochromic textile is an exciting new application due to its implications for fashion and UV protection. This book explores the phenomenon of photochromism, its application in textiles and ways of improving the performance and durability of photochromic fabrics.

Photochromic fibers and fabrics

Photochromic fibers and fabrics can change color in response to light radiation. They represent a smart textile having attracted much attention recently and showing potential applications in diverse areas. This review chapter gives an overview of the state-of-the-art techniques for the preparation of photochromic fibers and fabrics. The properties and applications of photochromic fabrics are also discussed.

Treatment of textile wastewater with membrane bioreactor: a critical review

Membrane bioreactor (MBR) technology has been used widely for various industrial wastewater treatments due to its distinct advantages over conventional bioreactors. Treatment of textile wastewater using MBR has been investigated as a simple, reliable and cost-effective process with a significant removal of contaminants. However, a major drawback in the operation of MBR is membrane fouling, which leads to the decline in permeate flux and therefore requires membrane cleaning. This eventually decreases the lifespan of the membrane. In this paper, the application of aerobic and anaerobic MBR for textile wastewater treatment as well as fouling and control of fouling in MBR processes have been reviewed. It has been found that long sludge retention time increases the degradation of pollutants by allowing slow growing microorganisms to establish but also contributes to membrane fouling. Further research aspects of MBR for textile wastewater treatment are also considered for sustainable operations of the process.

Fabrication of biocompatible enclosures for an electronic implant using 3D printing

A variety of different approaches have been employed to enableimplantation of electronic medical microdevices. A novel method of producing low-cost, rapidly fabricated implantable enclosures from biocompatible silicone is presented in this paper. This method utilises 3D computer-aided design software to design and model the enclosures prior to fabrication. The enclosures are then fabricated through additive manufacturing from biocompatible silicone using a 3D bioprinter. In this paper, four different implantable enclosure designs are presented. A prototyping stage with three different prototypes is described, these prototype enclosures are then evaluated through submersion and operation tests. A final design is developed in response to the obtained results, and then evaluated in a long term temperature controlled submersion test. The evaluation results are presented and discussed.Several areas of future works are identified and discussed.

Photocatalytic TiO2/porous BNNSs composites for textile dyeing wastewater treatment

This project develops a novel photocatalyst for the cleaning of textile dyeing wastewater. The newly-developed photocatalyst was prepared by combing porous boron nitride nanosheets with titanium dioxide particles and these composites show potentials for the practical treatment of the textile dyeing wastewater in a large scale.

Three dimensional printing as a way to create an engaging and meaningful context for learning

Three-dimensional (3D) printers are now commonplace in both primary and secondary schools within Australia. As with most new technologies they present a range of challenges to users in terms of technical problems and support, and how to integrate their use into the curriculum in a meaningful way. This research reports on data from a small number of Victorian primary schools from urban and regional areas. A case study methodology has been used to examine how each setting has approached the use of these printers and includes a review of the literature concerning the uptake of new technologies by non-experts. Data include interview transcripts from teachers, principals and technicians and photographic artefacts of 3D printed objects. Teachers reflected on their reasoning behind lesson plans and their aspirations for future use of 3D printers in the classroom. Some of the issues identified were teacher confidence, time to ‘play’ with and become familiar with 3D printers; and technical challenges that arose such as the time taken to print an object and clogging of printer extruders (heads). Recommendations are made concerning possible ways forward.