Challenges in the development of standards for synthetic turf for Australian football and cricket

Given the escalating drought conditions in Australia, synthetic surfaces have recently been explored as a viable surface option for community-level Australian football–cricket ovals. The vast majority of Australian football ovals are transformed into cricket pitches during the football off-season and hence the characteristics of both sports had to be duly considered in the development of standards that could be tested in a laboratory setting, for a synthetic turf surface. This paper describes the data collection and test methods undertaken in the development of the standards for synthetic surface use in Australian football and cricket. The paper also discusses the issues and challenges encountered during the development of standards for multi-sport synthetic surfaces to ensure player safety while maintaining the performance characteristics of both sports. Surface property and ball interaction tests were undertaken on natural playing surfaces, both in situ and in the laboratory to determine the properties of the current playing surface for each sport. This paper highlights the importance of careful consideration of the characteristics of both games and the use of equipment from both sports in the testing methods. The standards described in this paper have now been accepted by the Australian Football League and Cricket Australia and the product approval process and use of synthetic surfaces for Australian football and cricket is imminent.

Synthesis of ethyl oleate employing synthetic hydrogel-immobilized lipase of Bacillus coagulans MTCC-6375

Ten polymeric hydrogels were chemically synthesized by varying the concentrations of copolymer (DMA) and cross-linker (MBAm) molecules. An alkaline lipase of Bacillus coagulans MTCC-6375 was immobilized onto a poly (MAc-co-DMA-cl-MBAm)-hydrogel support at pH 8.5 and temperature 55ºC in 16 h. The bound lipase possessed 7.6 U.g⁻¹ (matrix) lipase activity with a specific activity of 18 U.mg⁻¹ protein. Hydrogel bound-lipase catalyzed esterification of oleic acid and ethanol to synthesize ethyl oleate in n-nonane. Various kinetic parameters were optimized to produce ethyl oleate using immobilized lipase. The optimal parameters were bound enzyme/substrate (E/S) ratio 0.62 mg/mM, ethanol/oleic acid 100 mM:75 mM or 100 mM:100 mM, incubation time 18 h and reaction temperature 55ºC that resulted in approximately 53% conversion of reactants into ethyl oleate in n-nonane. However, addition of a molecular sieve to the reaction mixture promoted the conversion to 58% in 18 h in n-nonane, which was equivalent to 55 mM of ethyl oleate produced.

Multi-target tracking via space transformations using a single frequency continuous wave radar

This paper investigates the location and velocity estimation problem involving multiple targets using the phase difference and frequency shift of the returned Doppler modulated signal. The minimal receiver configuration that addresses the data association and missing information problem is presented for the case of linear arrays. Non-linearly modeled Doppler radar measurements are used to obtain an accurate estimate of the target dynamics progressively in a linear framework utilizing a recently developed robust state estimation approach.

Effect of compositional gradient on thermal behavior of synthetic graphite-phenolic nanocomposites

Synthetic graphite–phenolic nanocomposites were designed and synthesized with a compositional gradient which is shown to influence transient temperature fields during rapid temperature changes. Such nanocomposites were fabricated using a compression moulding technique, and thermal conductivity and heat capacity of nanocomposites were experimentally determined using a modified transient plane source technique over a wide temperature range from 253.15 to 373.15 K. The effects of four compositional gradient configurations on the transient temperature field across the thickness of a nanocomposite plate, at a high imposed temperature, was investigated. The transient time and temperature fields in nanocomposite structures were highly affected by the compositional gradient configurations.

Synthetic evaluation method for bridge priority ranking

In order to maintain the transportation operation, proper monitoring systems should be established on road structures, especially bridges. Since these systems need enormous investments, only a part of bridges should be equipped. Thus, the priorities of the bridges should be ranked. In this paper, a method based on two-level synthetic evaluation is proposed. First, the importance of each bridge is analyzed through the economic analysis. Six factors are considered for the bridges in a network, including construction cost, service duration, length, location importance coefficient, traffic volume, and reconstruction time. Second, the safety condition of the bridge is evaluated by using improved entropy method (IEM) which combines subjective weight with objective entropy weight. Five indices are incorporated in this step, i.e., design and construction condition, technical condition, level of overloading, hazard of wind and earthquake and environmental factors. Finally, the priorities of all the bridge in one network can be ranked and classified through a judge matrix. To demonstrate the effectiveness of the proposed method, a main highway including 16 bridges is taken as an illustrative example. The results show that the bridges can be ranked and classified quickly by using the proposed method.

Composition-optimized synthetic graphite/polymer nanocomposites

In this study the optimization design, fabrication and characterization of synthetic graphite/phenolic nanocomposites are performed. The composition of synthetic graphite/phenolic nanocomposites was controlled across the thickness by stacking eight homogeneous layers containing 0, 5, 10, and 20wt% synthetic graphite in different sequences. Four compositional gradient patterns, as well as a homogenous nanocomposite, with the same geometry and synthetic graphite content, were fabricated to investigate the optimized design for thermomechanical properties. Results show that nanocomposites with a high concentration of synthetic graphite on the surfaces and neat resin at the center have the best thermomechanical and viscoelastic properties.

Further applications of doppler radar for non-contact respiratory assessment

This paper further investigates the use of Doppler radar for detecting and identifying certain human respiratory characteristics from observed frequency and phase modulations. Specifically, we show how breathing frequencies can be determined from the demodulated signal leading to identifying abnormalities of breathing patterns using signal derivatives, optimal filtering and standard statistical measures. Specifically, we report results on a robust method for distinguishing cessation of the normal breathing cycle. The proposed approach can have potential application in the management of sudden infant death syndrome(SIDS) and sleep apnea.

Doppler radar in respiratory monitoring : detection and analysis

This paper presents the preliminary results of our work in detecting respiration using Doppler Radar in the 2.7 GHz operating band. We demonstrate the capability of Doppler Radar in capturing breathing patterns under various breathing forms such as normal breathing, fast breathing, as well as different rate of inhale and exhale. From the captured signals, respiration rate was obtained using Fast Fourier Transform and validated. The proposed approach could potentially be used in number of applications involving breathing rate and breathing pattern analysis via non-contact methods.