Examining the effects of balloon control ring on ring spinning

The ring spinning process has been used to produce fine and high quality staple fibre yarns. The stability of the rotating yarn loop (i.e. balloon) between the yarn-guide and the traveller-ring is crucial to the success and economics of this process. Balloon control rings are used to contain the yarn-loop, by reducing the yarn tension and decreasing the balloon flutter instability. Flutter instability here refers to the uncontrolled changes in a ballooning yarn under dynamic forces, including the air drag. Due to the significant variation in the length and radius of the balloon during the bobbin filling process, the optimal location for the balloon control ring is not easily determined. In order to address this difficulty, this study investigates the variation in the radius of a free balloon and examines the effect of balloon control rings of various diameters at different locations on yarn tension and balloon flutter stability. The results indicate that the maximum radius of a free balloon and its corresponding position depend not only on the yarn-length to balloon-height ratio, but also on yarn type and count. A control ring of suitable radius and position can significantly reduce yarn tension and decrease flutter instability of free single-loop balloons. While the balloon control rings are usually fixed to, and move in sinc with, the ring frame, results reported in this study suggest that theoretically, a balloon control ring that always remains approximately half way between the yarn-guide and the ring rail during spinning can lead to significant reduction in yarn tension.

Where and when does a ring start and end? Testing the ring-species hypothesis in a species complex of Australian parrots

Speciation, despite ongoing gene flow can be studied directly in nature in ring species that comprise two reproductively isolated populations connected by a chain or ring of intergrading populations. We applied three tiers of spatio-temporal analysis (phylogeny/historical biogeography, phylogeography and landscape/population genetics) to the data from mitochondrial and nuclear genomes of eastern Australian parrots of the Crimson Rosella Platycercus elegans complex to understand the history and present genetic structure of the ring they have long been considered to form. A ring speciation hypothesis does not explain the patterns we have observed in our data (e.g. multiple genetic discontinuities, discordance in genotypic and phenotypic assignments where terminal differentiates meet). However, we cannot reject that a continuous circular distribution has been involved in the group's history or indeed that one was formed through secondary contact at the 'ring's' east and west; however, we reject a simple ring-species hypothesis as traditionally applied, with secondary contact only at its east. We discuss alternative models involving historical allopatry of populations. We suggest that population expansion shown by population genetics parameters in one of these isolates was accompanied by geographical range expansion, secondary contact and hybridization on the eastern and western sides of the ring. Pleistocene landscape and sea-level and habitat changes then established the birds' current distributions and range disjunctions. Populations now show idiosyncratic patterns of selection and drift. We suggest that selection and drift now drive evolution in different populations within what has been considered the ring.

Does the ring species concept predict vocal variation in the crimson rosella, Platycercus elegans, complex?

Vocal variation may be important in population divergence. We studied geographical variation in contact calls of parrots of the crimson rosella, Platycercus elegans, complex, which is characterized by striking geographical plumage coloration variation. This complex has long been considered a rare example of a ring species (where two divergent forms coexist in sympatry but are connected by a chain of intermediate populations forming a geographical ring). We tested whether contact call variation is consistent with the ring species hypothesis. We recorded calls throughout the ring, including several sites from the three main population groups forming the ring and interfaces between them. We analysed duration, peak frequency, fundamental frequency and frequency modulation. We found significant differences, particularly in fundamental frequency and frequency modulation, at multiple biogeographical scales ranging from local populations to subspecies level. Discriminant function analyses showed some populations could be reliably discriminated from call structure. However, our results provided little support for three key predictions of the ring species hypothesis: (1) calls of the terminal, most divergent forms were not significantly different in three of the four acoustic variables, and differences did not appear to be maintained in sympatry, (2) phenotypically/geographically intermediate populations were not characterized by intermediate calls, and (3) call variation was not concordant with geographical sequence around the ring from one terminal form to the other. Our results underscore the emerging view that the evolutionary histories and phenotypic variability of many long-held ring species may be inadequately described by the ring species hypothesis and require alternative explanations. (C) 2008 The Association for the Study of Animal Behaviour. Published by Elsevier Ltd. All rights reserved.

Coloration and colour vision in a parrot ring species

Ring species, in which reproductively isolated forms are connected by a chain of intermediate populations, provide valuable insights into the maintenance of trait variability, divergence in sympatry, and the how small changes can lead to species level differences. The parrot Platycercus elegans of eastern Australia is highly variable in plumage coloration in the wild, ranging from pale yellow to deep crimson in the chest, rump and head. It has been suggested as the only known parrot ring species worldwide, and one of less than ~25 ring species amongst all organisms. We test hypotheses for the information signalled by the colour variation, and for the maintenance of the variability.

Multi-level virtual ring : a foundation network architecture to support peer-to-peer application in wireless sensor network

Two main problems prevent the deployment of peer-to-peer application in a wireless sensor network: the index table, which should be distributed stored rather than uses a central server as the director; the unique node identifier, which cannot use the global addresses. This paper presents a multi-level virtual ring (MVR) structure to solve these two problems.

The index table in MVR is distributed stored by using the DHT technique. MVR is constructed decentralized and runs on mobile nodes themselves, requiring no central server or interruption. Naming system in MVR uses natural names rather than global addresses to identify sensor nodes. The MVR can route directly on the name identifiers of the sensor nodes without being aware the location. Some sensor nodes are selected as the backbone nodes by the backbone selection algorithm and are placed on the different levels of the virtual rings. MVR hashes nodes’ identifiers on the virtual ring, and stores them at the backbone nodes. Furthermore, MVR adopts cross-level routing to improve the routing efficiency.

Experiments using ns2 simulator for up to 200 nodes show that the storage and bandwidth requirements of MVR grow slowly with the size of the network. Furthermore, MVR has demonstrated as self-administrating, fault-tolerant, and resilient under the different workloads.

Multi-level virtual ring : cross-level name routing with embedded identifier in sensor network

This paper presents the Multi-level Virtual Ring (MVR), a new name routing scheme for sensor networks. MVR uses selection algorithm to identify sensor nodes' virtual level and uses Distribution Hash Table (DHT) to map them to the MVR, The address routing performs well in wired network, but it's not true in sensor network. Because when nodes are moving, the address of the nodes must be changed Further, the address routing needs servers to allocate addresses to nodes. To solve this problem, the name routing is being introduced, such as Virtual Ring Routing (VRR). MVR is a new name routing scheme, which improves the routing performance significantly by introducing the multi-level virtual ring and cross-level routing. Experiments show this embedded name routing is workable and achieves better routing performance.

Direct observation of defect levels in hexagonal BN by soft X-ray absorption spectroscopy

Formation of defects in hexagonal boron nitride under low-energy argon bombardment has been studied by near-edge X-ray absorption fine structure (NEXAFS) around B and N K-edges. Breaking of B-N bonds and creation of nitrogen vacancies has been identified from the B K-edge, followed by the formation of molecular nitrogen, N2, at interstitial positions. The presence of N2 produces a sharp resonance in the low-resolution NEXAFS spectra around N K-edge, showing the characteristic vibrational fine structure in high-resolution measurements. Several new peaks in NEXAFS spectra have been assigned to boron or nitrogen interstitials, in good agreement with theoretical predictions. © 2009 Elsevier B.V. All rights reserved.

Nanoparticle enhanced conductivity in organic ionic plastic crystals : space charge versus strain induced defect mechanism

High conductivity in solid-state electrolytes is a critical requirement for many advanced energy and other electrochemical applications. Plastic crystalline materials have shown promise in this regard, and the inclusion of nanosized inorganic particles in both amorphous and crystalline materials has indicated order of magnitude enhancements in ion transport induced by space charge or other defect enhancement. In this paper we present conductivity enhancements in the plastic crystal N,N‘-ethylmethylpyrrolidinium bis(trifluoromethanesulfonyl)amide ([C₂mpyr][NTf₂]) induced by nanosized SiO₂ particles. The addition of the nanoparticles dramatically increases plasticity and ion mobility. Positron annihilation lifetime spectroscopy (PALS) measurements indicate an increase in mean defect size and defect concentration as a result of nanoparticle inclusion. The scaling of the conductivity with size suggests that a “trivial space charge” effect is operable, although a strain induced enhancement of defects (in particular extended defects) is also likely given the observed increase in plasticity.