Influence of praseodymium - synergistic corrosion inhibition in mixed rare-earth diphenyl phosphate systems

Mixed rare-earth organophosphates have been investigated as potential corrosion inhibitors for AA2024-T3, and previously have shown synergistic inhibition behavior; however, the mechanism was not identified. In this paper, a key factor contributing to corrosion inhibition of AA2024-T3 with mischmetal diphenyl phosphate [Mm(dpp)3] is the unique stability of Pr(dpp)3 compared to other key rare earths in mischmetal. Although increasing pH causes precipitation of other components, the Pr compound is stable at higher pH. Electrochemically, a synergy is evident when Ce(dpp)3 and Pr(dpp)3 are combined. Raman mapping indicates the Pr(dpp)3 inhibitor leads to a more uniform coverage of the alloy.

The inhibition of hydrogen embrittlement in SAE 4340 steel in an aqueous environment with the rare earth compound lanthanum 4 hydroxy cinnamate

A preliminary study showed that the inhibitor lanthanum 4-hydroxy cinnamate ((La4OHcin)₃) at a concentration of 400 ppm prevented the hydrogen embrittlement (HE) of SAE 4340 steel tensile specimens when tested under slow strain rate conditions in a 0.01M NaCl. In the presence of the inhibitor, a complex film formed on the surface of specimens during the slow strain rate test (SSRT), and no corrosion pits were detected. Electrochemical polarization studies indicated that the La(4OHcin)₃ acted as an anodic inhibitor in the NaCl solution. This article also discusses the mechanism of HE inhibition by La(4OHcin)₃.

Rare earth cinnamates and their corrosion inhibition mechanisms for AS1020 steel

Speciation of the inhibitors lanthanum 2-hydroxy cinnamate and lanthanum 3-hydroxy cinnamate in solution has been evaluated and compared to the speciation of lanthanum 4-hydroxy cinnamate. The results have been correlated with corrosion inhibition efficiency for AS1020 steel in an aqueous chloride solution using a combination of analytical tools such as nuclear magnetic resonance (NMR) spectroscopy, electrospray mass spectrometry (ESMS), potentiodynamic polarisation.

Inhibiting localized corrosion of aluminum and aluminum alloy by rare earth metal compounds : behaviors and characteristics observed using an electrochemically integrated multi-electrode array

An electrochemically integrated multi-electrode array namely the wire beam electrode (WBE) has been used to characterize the behavior of cerium chloride (CeCl3) and lanthanum chloride (LaCl3) in inhibiting localized corrosion of AA2024-T3 and AA1100. CeCl3 has been found to inhibit AA2024-T3 corrosion in 0.005 M sodium chloride (NaCl) solution by suppressing galvanic corrosion activities and by creating a large number of insignificant anodes. It has also been shown to inhibit localized corrosion of AA1100 in 0.5 M NaCl solution by promoting the random distribution of minor anodes. LaCl3 has been found to inhibit localized corrosion of AA2024-T3 at 1000 ppm, although its efficiency dropped significantly when its concentration decreased to 500 ppm. The addition of CeCl3 and LaCl3 to corrosion testing cells at later stages was unable to effectively suppress existing corrosion anodes.

Synthesis and structural properties of Anhydrous Rare Earth Cinnamates, [RE(cinn)3]

Anhydrous rare earth tris(cinnamates) [RE(cinn)3] (RE = La–Lu, Y and Sc and cinnH = trans-cinnamic acid) were prepared by metathesis in water and by direct reaction of the metal with cinnamic acid in a 1,2,4,5-tetramethylbenzene flux at ca. 200 °C. X-ray crystal structure determinations and X-ray powder data show that, in the solid state, the larger lanthanoids (La–Dy) form an isomorphous polymeric series consisting of homoleptic nine-coordinate metal centres bonded to three chelating and bridging tridentate cinnamates. The late REIII cinnamate (RE = Dy, Ho–Lu, Y) complexes also form linear one-dimensional polymeric chains with all RE metal atoms being seven-coordinate. The cinnamates are either bound tridentate bridging in a μ-η2:η1 fashion, or μ-η1:η1syn-syn bidentate bridging. A structural break occurs at dysprosium which has been characterised in both crystallographic forms, and gives solely the late RE form when precipitated at 80 °C. ScIII cinnamate was also isolated as an analytically pure precipitate which was, again, found to be anhydrous in nature. A structural change was identified by powder XRD between the late REIII cinnamates and ScIII cinnamate.

Rare earth 4-hydroxycinnamate compounds as carbon dioxide corrosion inhibitors for steel in sodium chloride solution

A series of rare earth 4-hydroxycinnamate compounds including Ce(4OHCin)3, La(4OHCin)3, and Pr(4OHCin)3 has been synthesized and evaluated as novel inhibitors for carbon dioxide corrosion of steel in CO2-saturated sodium chloride solutions. Electrochemical measurements and surface analysis have shown that these REM(4OHCin)3 compounds effectively inhibited CO2 corrosion by forming protective inhibiting deposits that shut down the active electrochemical corrosion sites on the steel surface. Inhibition efficiency was found to increase in the order Ce(4OHCin)3 < La(4OHCin)3 < Pr(4OHCin)3 and with increase in inhibitor concentration up to 0.63 mM. Detailed insights into corrosion inhibition mechanism of these compounds in carbon dioxide environment are also provided.

The influence of rare earth mercaptoacetate on the initiation of corrosion on AA2024-T3 Part II: The influence of intermetallic compositions within heavily attacked sites

Localised corrosion is typical on AA2024-T3 due to intermetallic particles embedded in the alloy. The effect of intermetallic compositions on corrosion are not yet fully understood. EPMA data on AA2024-T3 surfaces before and after a 16. min immersion, analyses the influence of intermetallic clustering on the severity attack at local sites. While sites with a high number of domains and a large S-phase surface area typically lead to severe attack, maximising these features did not always lead to severe corrosion attack. Cerium or praseodymium mercaptoacetate inhibited corrosion ring formation. The common trends observed from such attack sites was also discussed.

Investigation of corrosion inhibition mechanisms of rare-earth mercaptoacetate inhibitors on AA2024-T3

 Corrosion inhibition mechanisms on the aerospace alloy, AA2024-T3, was investigated for the inhibitor combination of rare earth metals and mercaptoacetate. The inhibitor demonstrated synergistic protection for AA2024-T3 from localised corrosion. It is intended to be a more environmentally friendly alternative to toxic chromate-based inhibitors.

Rare earth 3-(4′-hydroxyphenyl)propionate complexes

The reaction of lanthanoid chlorides or nitrates with sodium 3-(4′-hydroxyphenyl)propionate (Na4hpp) in methanol or water has yielded complexes [La4(4hpp)12(H2O)6]·4H2O·MeOH (1), [Ce2(4hpp)6(H2O)3]·(H2O)·2.5(EtOH) (2a) (after crystallization from ethanol), [Ho(4hpp)3(H2O)2] (5), [Er(4hpp)3(H2O)2]·1.5(H2O) (6), and [Lu(4hpp)3]·H2O crystal composition (7), as well as heterobimetallics [NaCe2(4hpp)7(H2O)2]·3(H2O) (2b), [NaPr2(4hpp)7(H2O)2]·3(H2O) (3), and [NaNd2(4hpp)7(H2O)(MeOH)]·(H2O)·3(MeOH) (4). The structures of homometallic complexes 1, 2a, 6, and 7 reveal one-dimensional coordination polymers and vividly illustrate the effect of lanthanoid contraction with a decline in coordination numbers in the series from 9-11 (1), 9,10 (2a), 8 (6) to 7 (7) through variations in carboxylate coordination and ligation of water. Bimetallic complexes 2a and 4 each exhibit five different carboxylate binding modes as well as coordination of the 4-OH substituent of 4hpp to sodium thereby linking 1D polymer chains into a 2D network with both 9 and 10 coordinate Ln atoms and 6 coordinate sodium. Bulk products after drying lose solvent of crystallization in some cases (2a, 6), or exchange MeOH for water (4). X-ray powder diffraction indicates that bulk 2b and 3 are isotypic, as are bulk 5 and 6. In contrast to the excellent corrosion protection of lanthanum 4-hydroxycinnamate, compound 1 is ineffective in preventing the corrosion of mild steel, thereby establishing the importance of the -CHCH- structural unit of the former in its anti-corrosion properties. However the flexible -CH2-CH2- chain of the 4hpp ligand enables the crystal engineering of its lanthanoid complexes in a wide variety of structures as well as effective crystallization for structure determination, whereas the analogous 4-hydroxycinnamates have so far evaded structural characterization except for Ln = La, Ce owing to crystallization problems.

Rare earth-based corrosion inhibitors

Corrosion inhibitors are an important method for minimizing corrosion; however traditional inhibitors such as chromates pose environmental problems. Rare earth metals provide an important, environmentally-friendly alternative. This book provides a comprehensive review of current research and examines how rare earth metals can be used to prevent corrosion and applied to protect metals in such industries as aerospace and construction. Chapter 1 begins by examining the important need to replace chromate, and then goes on to discuss the chemistry of the rare earth metals and their related compounds. Chapter 2 considers the techniques that can be used to identify corrosion inhibition mechanisms and to test the levels of protection offered to different metals by rare earth compounds. Subsequent chapters consider in more detail how rare earth elements can be used as corrosion inhibitors in different forms and for different metals. This includes discussion on the potential of rare earth elements for self-healing, tunable and multifunctional coatings. Finally, chapter 10 considers the cost and availability of the rare earths and the potential health and environmental risks associated with extracting them. Provides a review of current research and examines how rare earth metals can be used to prevent corrosion and applied to protect metals in such industries as aerospace and construction. Includes discussion on the potential of rare earth elements for self-healing, tunable and multifunctional coatings. Considers the cost and availability of the rare earths and the potential health and environmental risks associated with extracting them.

Some issues relating to the ductility of wrought magnesium alloys

The present work is concerned with gaining a better understanding of the factors that control the ductility of wrought magnesium alloys. The ultimate aim is to develop alloys with vastly improved room temperature formability. It is shown that 3D tomography of fractured tensile specimens reveals disk shaped voids aligned more or less at 45 deg. to the tensile axis. These voids are consistent with twin induced void formation. It is also shown that the double twins that produce such voids form in contradiction to Schmid predictions. Finally, it is demonstrated that low levels of rare-earth additions leads to vastly improved texture and ductility in extrusions, as they do in rolled sheet.

Designing microstructures to enhance the plasticity of wrought magnesium alloys

The data examines the design of magnesium alloys for improved ductility by the edition of rare earth elements. These elements, such as cerium and gadolinium modify the texture of wrought products and also refine the grain size.