Relationship between workplace reform and workforce participation

This thesis sought to advance understanding of the politics of workplace reform, explaining the respective roles of management and employees and how they relate. The literature on workplace reform usually argues that reform is predicated on greater workforce participation in managerial decisions. More specifically, different approaches to workplace reform can be aligned to different forms of participation. Thus quality management can be associated with direct forms of participation, institutional workplace reform may depend on representative forms, and best practice may require a combination of both. This thesis uses empirical evidence to explore this alignment between the different approaches to workplace reform and forms of participation. The period chosen for empirical study is approximately 1985-1992 - an era of rapid innovation in workplace reform for Australian manufacturing. Three workplaces were chosen for intensive study from automotive component manufacturers because that industry was itself a laboratory for workplace reform and also because these firms exemplified different approaches to competitiveness and reform. Three approaches to workplace reform - quality management, institutional workplace reform, and best practice - were distinguished to capture the range of Australian practice at that time. Similarly two approaches to workplace participation were distinguished - direct and representative - to reflect the range of observable practices at that time and to represent competing philosophies. Direct participation illustrated an approach founded in managerial context of the political status quo, whilst representative forms were considered to permit a pluralist shift of power to enable employees to manage in place of management. The three case studies depict companies sharing the competitive crisis of their industry. From this stems the impetus for workplace reform. At this point the firms diverged in their choice of competitive strategies for workplace reform. The case studies reveal, at the superficial level, a match between the chosen approaches to workplace reform and forms of participation. Basically, quality management is associated with direct employee participation, institutional workplace reform with collective bargaining and representative consultative committees, and best practice with both. However when the implementation of reform and participation are examined this match becomes less significant. One firm, Auto Air, achieved highly effective outcomes in both reform and participation. Another firm, Auto Electrical, failed in both. The thesis concluded that the relationship between forms of participation and reform is less significant than the effective implementation of policy. Unitarist or pluralist approaches to power distribution count less than managerial capacity to integrate successive reform initiatives and their commitment to workforce participation hi change.

International collaboration for women in IT : how to avoid reinventing the wheel

This paper uses information contributed by ACM-W Ambassadors from nine countries to build a picture of women working to improve the gender balance in IT around the world. The focus on women’s participation in education, the workforce and the political arena is presented using Hofstede and Hofstede’s (2005) dimensions of cultural masculinity, power distribution and individuality for each of the ACM-W Ambassador countries to set the scene. It is apparent from this compilation of information that different social and cultural climates in many parts of the world will necessitate different actions by ACM-W Ambassadors in their respective countries. While the ACM-W Ambassador program provides a forum for ideas, support and strategies to deal with the under-representation of women in IT, many of the current Ambassadors have more pressing issues to deal with, and indeed a ‘one size for all’ model for programs to promote IT to women will not be suitable. Exploring the network from an Australian perspective this work demonstrates that much is to be gained from increasing international networks to share the strategies and support required to encourage more women into IT.

Rapid water quality characterization for chlorine demand and THM formation in drinking waters

The quality of drinking water generally deteriorates when it is delivered through a distribution system due to the decay of disinfectant, which subsequently allows the re-growth of microorganisms in the distribution system in addition to the formation of trihalomethane (THM). Therefore, a model which describes the changes that occur in the water quality in the distribution system is needed to determine whether to enhance the treatment processes or to improve the distribution system so that microbiological criteria are met. In this paper the chlorine decay kinetics and THM formation in treated water is modeled considering the reaction of chlorine with fast and slow reacting organic and nitrogenous compounds which are present in that water. The treated water was also passed through three types of resins to fractionate very hydrophobic acids (VHA), slightly hydrophobic acids (SHA), hydrophilic charged (CHA) and hydrophilic neutral (NEU) compounds which are present in the water. Chlorine decay tests were conducted on the effluents emerging from the resins to evaluate the chlorine demand and THM formation potential of those organic fractions. The model shows that the CHA presented in the waters has a very high THM formation potential (around 62% of the THM produced). VHA, NEU and CHA contributed to chlorine demand in the water.

Modeling bacterial growth in drinking water : effect of nutrients

This article presents a model of growth of naturally occurring heterotrophic bacteria in the bulk water phase in the absence of disinfectant. The model considers growth with carbon, phosphorus, and nitrogen balance, death and lysis of bacteria, and conversion of less biodegradable organic carbon to assimilable organic carbon. Experimental data from two raw and two treated waters were used to test the model. The model describes the increase of live and dead bacterial cells in the water phase, and its output closely matches the experimental data. Such a model has the ability to characterize water nutrient status as well as to predict behavior of indigenous heterotrophic bacteria. The ability to predict bacterial population dynamics with respect to nutrients is beneficial for water treatment optimization. The model, based on microbiological measurements, helps to characterize treated water quality and project performance in terms of water quality into a distribution system.

Effects of task lighting on visual function in age-related macular degeneration

The purpose was to investigate the effects of the spectral power distribution (SPD) and illuminance of task lighting on visual function in age-related macular degeneration (ARMD) compared to normal healthy eyes. Twenty-eight subjects with ARMD and 18 age-matched normal subjects were studied. The effects on visual function were determined for four common task light sources: standard pearl coat incandescent (SP), daylight blue incandescent (DL), warm white fluorescent (WW) and cool white fluorescent (CW). Apart from a small, statistically significant improvement in contrast sensitivity with DL compared to SP lighting (0.5 dB, p = 0.01), there were no significant effects of SPD on other visual functions and no differences in the effects for subjects with ARMD and those with normal vision. Thus, for task lighting typically used in low vision rehabilitation, the SPD would seem to be of minimal clinical importance to visual function. However, increasing the task illuminance had a greater effect on visual function, in particular for subjects with ARMD (p < 0.01). For an increase in illuminance from 300 to 3000 lux, the mean increase in contrast sensitivity and near visual acuity was 1.5 dB and 0.13 log MAR, respectively. Although this effect is not large, we suggest that it is clinically relevant and supports the provision of additional task illuminance as an important part of low vision rehabilitation for patients with ARMD.

Voltage profile improvement for distributed wind generation using D-STATCOM

This paper presents the application of FACTS devices for the enhancement of dynamic voltage stability in distribution networks with distributed wind generation. The analysis is carried over a test distribution system representative of the Kumamoto area in Japan. The detailed mathematical modelling of the system is also presented. Firstly, this paper provides simulation results showing the effects of higher and lower penetration of distributed wind generation on the voltage dynamics in a faulted system. Then, a distribution static synchronous compensator (D-STATCOM) is used to improve the voltage profile of the system. This analysis shows that D-STATCOM has significant performance to improve the voltage dynamics of distribution system compared to shunt capacitor.

Evolution of optogenetic microdevices

Implementation of optogenetic techniques is a recent addition to the neuroscientists' preclinical research arsenal, helping to expose the intricate connectivity of the brain and allowing for on-demand direct modulation of specific neural pathways. Developing an optogenetic system requires thorough investigation of the optogenetic technique and of previously fabricated devices, which this review accommodates. Many experiments utilize bench-top systems that are bulky, expensive, and necessitate tethering to the animal. However, these bench-top systems can make use of power-demanding technologies, such as concurrent electrical recording. Newer portable microdevices and implantable systems carried by freely moving animals are being fabricated that take advantage of wireless energy harvesting to power a system and allow for natural movements that are vital for behavioral testing and analysis. An investigation of the evolution of tethered, portable, and implantable optogenetic microdevices is presented, and an analysis of benefits and detriments of each system, including optical power output, device dimensions, electrode width, and weight is given. Opsins, light sources, and optical fiber coupling are also discussed to optimize device parameters and maximize efficiency from the light source to the fiber, respectively. These attributes are important considerations when designing and developing improved optogenetic microdevices.

Effect of elastic modulus and poisson's ratio on guided wave dispersion using transversely isotropic material modelling

Timber poles are commonly used for telecommunication and power distribution networks, wharves or jetties, piling or as a substructure of short span bridges. Most of the available techniques currently used for non-destructive testing (NDT) of timber structures are based on one-dimensional wave theory. If it is essential to detect small sized damage, it becomes necessary to consider guided wave (GW) propagation as the behaviour of different propagating modes cannot be represented by one-dimensional approximations. However, due to the orthotropic material properties of timber, the modelling of guided waves can be complex. No analytical solution can be found for plotting dispersion curves for orthotropic thick cylindrical waveguides even though very few literatures can be found on the theory of GW for anisotropic cylindrical waveguide. In addition, purely numerical approaches are available for solving these curves. In this paper, dispersion curves for orthotropic cylinders are computed using the scaled boundary finite element method (SBFEM) and compared with an isotropic material model to indicate the importance of considering timber as an anisotropic material. Moreover, some simplification is made on orthotropic behaviour of timber to make it transversely isotropic due to the fact that, analytical approaches for transversely isotropic cylinder are widely available in the literature. Also, the applicability of considering timber as a transversely isotropic material is discussed. As an orthotropic material, most material testing results of timber found in the literature include 9 elastic constants (three elastic moduli and six Poisson's ratios), hence it is essential to select the appropriate material properties for transversely isotropic material which includes only 5 elastic constants. Therefore, comparison between orthotropic and transversely isotropic material model is also presented in this article to reveal the effect of elastic moduli and Poisson's ratios on dispersion curves. Based on this study, some suggestions are proposed on selecting the parameters from an orthotropic model to transversely isotropic condition.

Constrained coordinated distributed control of smart grid with asynchronous information exchange

Smart grid constrained optimal control is a complex issue due to the constant growth of grid complexity and the large volume of data available as input to smart device control. In this context, traditional centralized control paradigms may suffer in terms of the timeliness of optimization results due to the volume of data to be processed and the delayed asynchronous nature of the data transmission. To address these limits of centralized control, this paper presents a coordinated, distributed algorithm based on distributed, local controllers and a central coordinator for exchanging summarized global state information. The proposed model for exchanging global state information is resistant to fluctuations caused by the inherent interdependence between local controllers, and is robust to delays in information exchange. In addition, the algorithm features iterative refinement of local state estimations that is able to improve local controller ability to operate within network constraints. Application of the proposed coordinated, distributed algorithm through simulation shows its effectiveness in optimizing a global goal within a complex distribution system operating under constraints, while ensuring network operation stability under varying levels of information exchange delay, and with a range of network sizes.

Reducing the effect of wave dispersion in a timber pole based on transversely isotropic material modelling

Round timbers are used for telecommunication and power distribution networks, jetties, piles, short span bridges etc. To assess the condition of these cylindrical shape timber structures, bulk and elementary wave theory are usually used. Even though guided wave can represents the actual wave behaviour, a great deal complexity exists to model stress wave propagation within an orthotropic media, such as timber. In this paper, timber is modelled as transversely isotropic material without compromising the accuracy to a great extent. Dispersion curves and mode shapes are used to propose an experimental set up in terms of the input frequency and bandwidth of the signal, the orientation of the sensor and the distance between the sensors in order to reduce the effect of the dispersion in the output signal. Some example based on the simulated signal is also discussed to evaluate the proposed experimental set up.

A study of guided wave propagation in timber pole using spectral finite element method

Timber is one of the most widely used structural material all over the world. Round timbers can be seen as a structural component in historical buildings, jetties, short span bridges and also as piles for foundation and poles for electrical and power distribution. To evaluate the current condition of these cylindrical type timber structures, guided wave has a great potential. However, the difficulties associated with the guided wave propagation in timber materials includes orthotropic behaviour of wood, moisture contents, temperature, grain direction, etc. In addition, the effect of fully or partially filled surrounding media, such as soil, water, etc. causes attenuation on the generated stress wave. In order to investigate the effects of these parameters on guided wave propagation, extensive numerical simulation is required to conduct parametric studies. Moreover, due to the presence of multi modes in guided wave propagation, dispersion curves are of great importance. Even though conventional finite element method (FEM) can determine dispersion curves along with wave propagation in time domain, it is highly computationally expensive. Furthermore, incorporating orthotropic behaviour and surrounding media to model a thick cylindrical wave (large diameter cylindrical structures) make conventional FEM inefficient for this purpose. In contrast, spectral finite element method (SFEM) is a semi analytical method to model the guided wave propagation which does not need fine meshes compared to the other methods, such as FEM or finite difference method (FDM). Also, even distribution of mass and stiffness of structures can be obtained with very few elements using SFEM. In this paper, the suitability of SFEM is investigated to model guided wave propagation through an orthotropic cylindrical waveguide with the presence of surrounding soil. Both the frequency domain analysis (dispersion curves) and time domain reconstruction for a multi-mode generated input signal are presented under different loading location. The dispersion curves obtained from SFEM are compared against analytical solution to verify its accuracy. Lastly, different numerical issues to solve for the dispersion curves and time domain results using SFEM are also discussed.

Characteristics and applications of energy storage system to power network - A review

Maintaining reliability and stability of a power systems in transmission and distribution level becomes a big challenge in present scenario. Grid operators are always responsible to maintain equilibrium between available power generation and demand of end users. Maintaining grid balance is a bigger issue, in case of any unexpected generation shortage or grid disturbance or integration of any renewable energy sources like wind and solar power in the energy mix. In order to compensate such imbalance and to facilitate more renewable energy sources with the grid, energy storage system (ESS) started to be playing an important role with the advancement of the state of the art technology. ESS can also help to get reduction in greenhouse gas (GHG) emission by means of integrating more renewable energy sources to the grid. There are various types of Energy Storage (ES) technologies which are being used in power systems network from large scale (above 50MW) to small scale (up to 100KW). Based on the characteristics, each storage technology has their own merits and demerits. This paper carried out extensive review study and verifies merits and demerits of each storage technology and identifies the suitable technology for the future. This paper also has conducted feasibility study with the aid of E-SelectTM tool for various ES technologies in applications point of view at different grid locations. This review study helps to evaluate feasible ES technology for a particular electrical application and also helps to develop smart hybrid storage system for grid applications in efficient way.

Modelling and power quality analysis of a grid-connected solar PV system

Increased concern about global warming coupled with the escalating demand of energy has driven the conventional power system to be more reliable one by integrating Renewable Energies (RE) in to grid. Over the recent years, integration of solar PV forming a gridconnected PV is considered as one of the most promisingtechnologies to the developed countries like Australia to meet the growing demand of energy. This rapid increase in grid connected photovoltaic (PV) systems has made the supply utilities concerned about the drastic effects that have to be considered on the distribution network in particular voltage fluctuations, harmonic distortions and the Power factor for sustainable power generation. However, irrespective of thefact that the utility grid can accommodate the variability of load or irregular solar irradiance, it is essential to study the impact of grid connected PV systems during higher penetration levels as the intermittent nature of solar PV adversely effects the grid characteristics in meeting the load demand. Hence, keeping this in track, this paper examines the grid-connected PV system considering a residential network of Geelong region (38◦.09' S and 144◦.21’ E) and explores the level of impacts considering summer load profile with a change in the level of integrations. Initially, a PV power system network model is developed in Matlab-Simulink environment and the simulations are carried out to explore the impacts of solar PV penetration at low voltage distribution network considering power quality (PQ) issues such as voltage fluctuations, harmonics distortion at different load conditions.

Optimal power allocation and load distribution for multiple heterogeneous multicore server processors across clouds and data centers

For multiple heterogeneous multicore server processors across clouds and data centers, the aggregated performance of the cloud of clouds can be optimized by load distribution and balancing. Energy efficiency is one of the most important issues for large-scale server systems in current and future data centers. The multicore processor technology provides new levels of performance and energy efficiency. The present paper aims to develop power and performance constrained load distribution methods for cloud computing in current and future large-scale data centers. In particular, we address the problem of optimal power allocation and load distribution for multiple heterogeneous multicore server processors across clouds and data centers. Our strategy is to formulate optimal power allocation and load distribution for multiple servers in a cloud of clouds as optimization problems, i.e., power constrained performance optimization and performance constrained power optimization. Our research problems in large-scale data centers are well-defined multivariable optimization problems, which explore the power-performance tradeoff by fixing one factor and minimizing the other, from the perspective of optimal load distribution. It is clear that such power and performance optimization is important for a cloud computing provider to efficiently utilize all the available resources. We model a multicore server processor as a queuing system with multiple servers. Our optimization problems are solved for two different models of core speed, where one model assumes that a core runs at zero speed when it is idle, and the other model assumes that a core runs at a constant speed. Our results in this paper provide new theoretical insights into power management and performance optimization in data centers.

Impact analysis study in a typical solar PV microgrid power system

Microgrid (MG) power system with Distributed Generation (DG) plays an important role to provide reliable, secure, and low carbon emission energy supply for communities, in case of any failure or disturbance of energy supply from the main grid. At the same time, DG also contributes to several technical issues in the MG distribution network. Power quality (PQ) issues are one of the main technical challenges when integrating Renewable Energy (RE) sources in MG network. In this paper, the PQ issues like; power variation, voltage deviation, and Total Harmonic Distortion (THD) have been addressed by an impact analysis study on a typical solar PV MG power system in both on-grid and off-grid mode of operation. Analysis results from the study will be helpful in developing an independent MG power system with improved PQ conditions.