A decentralised multi-agent approach to enhance the stability of smart microgrids with renewable energy

This paper presents the impact of large penetration of wind power on the transient stability through a dynamic evaluation of the critical clearing times (CCTs) by using intelligent agent-based approach. A decentralised multi-agent-based framework is developed, where agents represent a number of physical device models to form a complex infrastructure for computation and communication. They enable the dynamic flow of information and energy for the interaction between the physical processes and their activities. These agents dynamically adapt online measurements and use the CCT information for relay coordination to improve the transient stability of power systems. Simulations are carried out on a smart microgrid system for faults at increasing wind power penetration levels and the improvement in transient stability using the proposed agent-based framework is demonstrated.

Distributed multi-agent scheme to improve dynamic voltage stability of distribution networks

In this paper, a distributed multi-agent scheme is presented for reactive power management with renewable energy sources (RESs). The multi-agent system (MAS) framework is developed for distribution systems to improve the stability which is mostly dominated by voltage and the agents in this framework coordinate among themselves using online information and energy flow. In this paper, the agents basically perform two tasks- reactive power estimation and necessary control actions. The topology of distribution network is used to estimate the required reactive power for maintaining voltage stability where distributed static synchronous compensators (DSTATCOMs) are used to supply this reactive power. The DSTATCOM is controlled by using a linear quadratic regulator (LQR) controller within the agent framework. The proposed scheme is further compared with the conventional approach to validate the simulation results.

Primary voltage control of a single-phase inverter using linear quadratic regulator with integrator

This paper proposes a linear quadratic regulator with integral action, ensuring fast dynamic response and resisting capability of voltage deviation from instantaneous reference grid voltage, to control the inverter voltage that can also be used in a microgrid. The proposed control strategy is based on a linear quadratic regulator, minimizing the cost function of the system, with integral action used to impede voltage degradation from a reference voltage for outside disturbances of the system, such as abrupt load change. The combined integral term assists to recover the voltage difference between grid and reference grid voltage. The validity of the proposed controller has been tested with linear and non-linear loads under various conditions. In both cases, the effectiveness of the controller has been proved. The result of the proposed controller is good to track the instantaneous reference grid voltage.

Nonlinear controller design for vehicle-to-grid systems with output LCL filters

This paper presents a nonlinear controller design for vehicle-to-grid (V2G) systems with LCL output filters. The V2G systems are modeled with LCL output filters in order to eliminate harmonics for improving power qualities and the nonlinear controller is designed based on the feedback linearization. The feasibility of using the appropriate feedback linearization approaches, either partial or exact, is also investigated through the feedback linearizability of V2G systems. In this paper, partial feedback linearization is used to design the controller with a capability of sharing both active and reactive power in V2G systems. The performance of the proposed controller controller is evaluated on a single-phase full-bridge converter-based V2G system with an LCL output filter and compared to that of without any filter. Simulation results clearly demonstrate the harmonic elimination capabilities of the proposed V2G structure with the proposed control scheme.

Agent-based reactive power management of power distribution networks with distributed energy generation

In this paper, a new agent-based distributed reactive power management scheme is proposed to improve the voltage stability of energy distribution systems with distributed generation units. Three types of agents – distribution system agent, estimator agent, and control agent are developed within the multi-agent framework. The agents simultaneously coordinated their activities through the online information and energy flow. The overall achievement of the proposed scheme depends on the coordination between two tasks – (i) estimation of reactive power using voltage variation formula and (ii) necessary control actions to provide the estimated reactive power to the distribution networks through the distributed static synchronous compensators. A linear quadratic regulator with a proportional integrator is designed for the control agent in order to control the reactive component of the current and the DC voltage of the compensators. The performance of the proposed scheme is tested on a 10-bus power distribution network under various scenarios. The effectiveness is validated by comparing the proposed approach to the conventional proportional integral control approach. It is found that, the agent-based scheme provides excellent robust performance under various operating conditions of the power distribution network.

Robust control for power sharing in microgrids with low-inertia wind and PV generators

This paper presents a robust control design scheme for a multidistributed energy resource (DER) microgrid for power sharing in both interconnected and islanded modes. The scheme is proposed for micgrogrids consisting of photovoltaic (PV) units and wind turbine driven doubly fed induction generators (DFIGs). A battery is integrated with each of the wind and solar DER units. The control scheme has two levels: 1) one centralized multi-input–multi-output robust controller for regulating the set reference active and reactive powers and 2) local real and reactive power droop con-trollers, one on each DER unit. The robust control scheme utilizes multivariable H1 control to design controllers that are robust to the changes in the network and system nonlinearities. The effectiveness of the proposed controller is demonstrated through large-distur-bance simulations, with complete nonlinear models, on a test micro-grid. It is found that the power sharing controllers provide excellent performance against large disturbances and load variations during islanding transients and interconnected operation.

Distributed multi-agent scheme to enhance cyber security of smart power grids

This paper presents a distributed multi-agent scheme for enhancing the cyber security of smart grids which integrates computational resources, physical processes, and communication capabilities. Smart grid infrastructures are vulnerable to various cyber attacks and noises whose influences are significant for reliable and secure operations. A distributed agent-based framework is developed to investigate the interactions between physical processes and cyber activities where the attacks are considered as additive sensor fault signals and noises as randomly generated disturbance signals. A model of innovative physical process-oriented counter-measure and abnormal angle-state observer is designed for detection and mitigation against integrity attacks. Furthermore, this model helps to identify if the observation errors are caused either by attacks or noises.

Distributed generation capacity planning for distribution networks to minimize energy loss: an unbalanced multi-phase optimal power flow based approach

This chapter presents an unbalanced multi-phase optimal power flow (UMOPF) based planning approach to determine the optimum capacities of multiple distributed generation units in a distribution network. An adaptive weight particle swarm optimization algorithm is used to find the global optimum solution. To increase the efficiency of the proposed scheme, a co-simulation platform is developed. Since the proposed method is mainly based on the cost optimization, variations in loads and uncertainties within DG units are also taken into account to perform the analysis. An IEEE 123 node distribution system is used as a test distribution network which is unbalanced and multi-phase in nature, for the validation of the proposed scheme. The superiority of the proposed method is investigated through the comparisons of the results obtained that of a Genetic Algorithm based OPF method. This analysis also shows that the DG capacity planning considering annual load and generation uncertainties outperform the traditional well practised peak-load planning.

Active power control in an islanded microgrid using DC link voltage status

This paper proposes a power balancing strategy for dispatchable and non-dispatchable sources in an islanded microgrid. This control method enables energy storage system that employs a voltage-band at a dc busbar to maintain grid voltage stability for short period disturbances in a network. This voltage-band, applied to obtain maximum benefit from the storage system, depends on a storage capacity feature to avoid voltage limit violation. In addition, a linear quadratic regulator is employed as a voltage controller to track the reference grid voltage that is obtained from the proposed P/V droop control strategy. In the proposed control method, a long-term energy storage element, such as a battery, also can be used to regulate voltage and deliver insufficient power in a microgrid. It is concluded that the proposed control method exhibits an effective result in voltage and power issue during transient.

Distributed multi-agent scheme to enhance cyber security of smart power grids

This paper presents a distributed multi-agent scheme for enhancing the cyber security of smart grids which integrates computational resources, physical processes, and communication capabilities. Smart grid infrastructures are vulnerable to various cyber attacks and noises whose influences are significant for reliable and secure operations. A distributed agent-based framework is developed to investigate the interactions between physical processes and cyber activities where the attacks are considered as additive sensor fault signals and noises as randomly generated disturbance signals. A model of innovative physical process-oriented counter-measure and abnormal angle-state observer is designed for detection and mitigation against integrity attacks. Furthermore, this model helps to identify if the observation errors are caused either by attacks or noises.

Robust partial feedback linearizing excitation controller design for multimachine power systems

This paper presents a new robust nonlinear excitationcontroller design for synchronous generators in multimachine powersystems to enhance the transient stability. The mismatches betweenthe original power system model and formulated mathematical modelare considered as uncertainties which are modeled through thesatisfaction of matching conditions. The exogenous noises appearingfrom measurements are incorporated with the power system modelincluding the two-axis model of synchronous generators. The partialfeedback linearization technique is used to design the controller whichtransforms the original nonlinear multimachine power system modelinto several reduced-order linear and autonomous subsystems. Thedesired control law is obtained for each subsystem and implemented ina decentralized manner provided that the dynamics of the autonomoussubsystems have no effects on the overall stability of the system. Theanalysis related to the dynamics of noisy autonomous subsystems isalso included and the proposed controller has the excellent capabilityto decouple these noises. Finally, the performance of the proposedcontrol scheme is evaluated on an IEEE 39-bus benchmark powersystem following different types of large disturbances. The performanceof the proposed controller is compared to that of a partialfeedback linearizing controller, which is designed without robustnessproperties, to verify the effectiveness of the proposed control scheme.

Transient stability enhancement of multimachine power systems using nonlinear observer-based excitation controller

This paper presents an approach to design a nonlinear observer-based excitation controller for multimachine power systems to enhance the transient stability. The controller is designed based on the partial feedback linearization of a nonlinear power system model which transforms the model into a reducedorder linear one with an autonomous dynamical part. Then a linear state feedback stabilizing controller is designed for the reduced-order linear power system model using optimal control theory which enhances the stability of the entire system. The states of the feedback stabilizing controller are obtained from the nonlinear observer and the performance of this observer-based controller is independent of the operating points of power systems. The performance of the proposed observer-based controller is compared to that of an exact feedback linearizing observer-based controller and a partial feedback linearizing controller without observer under different operating conditions.

Effects of large dynamic loads on power system stability

This paper investigates the critical parameters of power systems which affect the stability of the system. The analysis is conducted on both a single machine infinite bus (SMIB) system and a large multimachinesystem with dynamic loads. To further investigate the effects of dynamic loads on power system stability, the effectiveness of conventional as well as modern linear controllers is tested and compared with thevariation of loads. The effectiveness is assessed based on the damping of the dominant mode and the analysis in this paper highlights the fact that the dynamic load has substantial effect on the dampingof the system.

Nonlinear DSTATCOM controller design for distribution network with distributed generation to enhance voltage stability

This paper presents a nonlinear controller design for a DSTATCOM connected to a distribution network with distributed generation (DG) to regulate the line voltage by providing reactive power compensation.The controller is designed based on the partial feedback linearization which transforms the nonlinear system into a reduced-order linear system and an autonomous system whose dynamics are known as internal dynamics of the system. This paper also investigates the stability of internal dynamics of a DSTATCOM as it is a basic requirement to design partial feedback linearizing controllers. The performance of the proposed controller is evaluated in terms reactive power compensation to enhance the voltage stability of distribution with DG.

The SLUGGS survey: a new mask design to reconstruct the stellar populations and kinematics of both inner and outer galaxy regions

Integral field unit spectrographs allow the 2D exploration of the kinematics and stellar populations of galaxies, although they are generally restricted to small fields-of-view. Using the large field-of-view of the DEIMOS multislit spectrograph on Keck and our Stellar Kinematics using Multiple Slits technique, we are able to extract sky-subtracted stellar light spectra to large galactocentric radii. Here, we present a new DEIMOS mask design named SuperSKiMS that explores large spatial scales without sacrificing high spatial sampling. We simulate a set of observations with such a mask design on the nearby galaxy NGC 1023, measuring stellar kinematics and metallicities out to where the galaxy surface brightness is orders of magnitude fainter than the sky. With this technique we also reproduce the results from literature integral field spectroscopy in the innermost galaxy regions. In particular, we use the simulated NGC 1023 kinematics to model its total mass distribution to large radii, obtaining comparable results with those from published integral field unit observation. Finally, from new spectra of NGC 1023, we obtain stellar 2D kinematics and metallicity distributions that show good agreement with integral field spectroscopy results in the overlapping regions. In particular, we do not find a significant offset between our Stellar Kinematics using Multiple Slits and the ATLAS3D stellar velocity dispersion at the same spatial locations.