Interplay of ethical trust and social moral norms : environment modelling and computational mechanisms in agent-based social simulation

In many agent-based models theoretical and computational mechanisms are needed for model abstraction and design. However, it can be challenging to arrive at the appropriate mechanisms and models. This research on the interplay of ethical trust and social moral norms addresses that challenge via an analytical framework on the spread of moral norms, the modelling of social environment and the selection of spread mechanisms as applied to agent-based social simulation. We describe the mechanism alignment mapping, two forms of interaction modelling between the social environment and agents, and the results obtained from the simulation of our computational model. These results provide an insight into how the agent-based paradigm can be applied as a technique of investigation for normative moral processes in computational social sciences.

Prediction interval-based modelling of polymerization reactor: a new modelling strategy for chemical reactors

Precise and reliable modelling of polymerization reactor is challenging due to its complex reaction mechanism and non-linear nature. Researchers often make several assumptions when deriving theories and developing models for polymerization reactor. Therefore, traditional available models suffer from high prediction error. In contrast, data-driven modelling techniques provide a powerful framework to describe the dynamic behaviour of polymerization reactor. However, the traditional NN prediction performance is significantly dropped in the presence of polymerization process disturbances. Besides, uncertainty effects caused by disturbances present in reactor operation can be properly quantified through construction of prediction intervals (PIs) for model outputs. In this study, we propose and apply a PI-based neural network (PI-NN) model for the free radical polymerization system. This strategy avoids assumptions made in traditional modelling techniques for polymerization reactor system. Lower upper bound estimation (LUBE) method is used to develop PI-NN model for uncertainty quantification. To further improve the quality of model, a new method is proposed for aggregation of upper and lower bounds of PIs obtained from individual PI-NN models. Simulation results reveal that combined PI-NN performance is superior to those individual PI-NN models in terms of PI quality. Besides, constructed PIs are able to properly quantify effects of uncertainties in reactor operation, where these can be later used as part of the control process. © 2014 Taiwan Institute of Chemical Engineers.

A methodology for simulating hydrogen sulphide generation in sewer network using EPA SWMM

Predicting hydrogen sulphide concentration in sewer network through modelling tools will be beneficial for many stakeholders to design appropriate mitigation strategies. However, the hydrogen sulphide modelling in a sewer network is crucially dependent on the hydraulic modelling of the sewer. The establishment of precise hydrogen sulphide and hydraulic modelling however requires detailed and accurate information about the sewer network structure and the model parameters. This paper outlines a novel approach for the development of hydraulic and hydrogen sulphide modelling to predict the concentration of hydrogen sulphide in sewer network. The approach combines the calculation of wastewater generation and implementation of flow routing on the EPA SWMM 5.0 platform to allow hydrodynamic simulations. Dynamic wave routing is used for hydraulic simulations. It is considered to be the best approach to route existing/old sewer flow. The build-up of hydrogen sulphide model includes the empirical models of hydrogen sulphide generation and emission. Trial of the model was conducted to simulate a sewer network in Seoul, South Korea with some hypothetical data. Further analysis on the use of chemical dosing on the sewer pipe was also performed by the model. Promising results have been obtained through the model, however calibration and validation of the model is required. The presented methodology provides a possibility of the free platform SWMM to be used as a prediction tool of hydrogen sulphide generation. © 2014 © 2014 Balaban Desalination Publications. All rights reserved.

Modelling and power quality analysis of a grid-connected solar PV system

Increased concern about global warming coupled with the escalating demand of energy has driven the conventional power system to be more reliable one by integrating Renewable Energies (RE) in to grid. Over the recent years, integration of solar PV forming a gridconnected PV is considered as one of the most promisingtechnologies to the developed countries like Australia to meet the growing demand of energy. This rapid increase in grid connected photovoltaic (PV) systems has made the supply utilities concerned about the drastic effects that have to be considered on the distribution network in particular voltage fluctuations, harmonic distortions and the Power factor for sustainable power generation. However, irrespective of thefact that the utility grid can accommodate the variability of load or irregular solar irradiance, it is essential to study the impact of grid connected PV systems during higher penetration levels as the intermittent nature of solar PV adversely effects the grid characteristics in meeting the load demand. Hence, keeping this in track, this paper examines the grid-connected PV system considering a residential network of Geelong region (38â—¦.09' S and 144â—¦.21’ E) and explores the level of impacts considering summer load profile with a change in the level of integrations. Initially, a PV power system network model is developed in Matlab-Simulink environment and the simulations are carried out to explore the impacts of solar PV penetration at low voltage distribution network considering power quality (PQ) issues such as voltage fluctuations, harmonics distortion at different load conditions.

Friendship network characteristics are associated with physical activity and sedentary behavior in early adolescence

INTRODUCTION: There is limited understanding of the association between peer social networks and physical activity (PA), sedentary and screen-related behaviors. This study reports on associations between personal network characteristics and these important health behaviors for early adolescents. METHODS: Participants were 310 students, aged 11-13 years, from fifteen randomly selected Victorian primary schools (43% response rate). PA and sedentary behaviors were collected via accelerometer and self-report questionnaire, and anthropometric measures via trained researchers. Participants nominated up to fifteen friends, and described the frequency of interaction and perceived activity intensity of these friends. Personal network predictors were examined using regression modelling for PA and sedentary/screen behavior. RESULTS: Perceived activity levels of friends, and friendships with very frequent interaction were associated with outside-of-school PA and/or sedentary/screen time. Differences according to sex were also observed in the association between network characteristics and PA and sedentary time. A higher number of friends and greater proportion of same sex friends were associated with boys engaging in more moderate-to-vigorous PA outside of school hours. PA intensity during school-day breaks was positively associated with having a greater proportion of friends who played sports for girls, and a greater proportion of male friends for boys. CONCLUSION: Friendship network characteristics are associated with PA and sedentary/screen time in late childhood/early adolescence, and these associations differ by sex. The positive influence of very active peers may be a promising avenue to strengthen traditional interventions for the promotion of PA and reduction in screen time.

Modelling and simulation of regeneration in AC traction propulsion system of electrified railway

This paper presents a robust model and its simulation to investigate the performance of an AC propulsion system in a rail vehicle for directly returning the regenerative braking power to the feeder substation of an AC traction network. This direct returning method can be an efficient approach for energy recovery if the regenerative braking is reliably applied. However, it is shown that this method can cause undesired voltage fluctuations if the regenerative braking regime or braking location of the rail vehicle change. The load torque on the traction motor (TM) is precisely modelled when pure electrical braking is applied. Different states of the direct torque controlled inverter are modelled when the TM regenerates. A circuit model for the utility grid, load impedances and the traction network is developed to evaluate the network receptivity against the regenerated power. The dynamics of the electromagnetic torque and the fluctuations of the DC-link voltage are investigated for two operational conditions: changes on the regenerative braking regime and changes on the rail vehicle braking location. The results justify how the DC-link voltage dramatically fluctuates with variations of the rail vehicle's operation conditions, whereas the electromagnetic torque is maintained on optimum rates.

Boron carbide reinforced aluminium matrix composite : physical, mechanical characterization and mathematical modelling

This paper investigates the manufacturing of aluminium-boron carbide composites using the stir casting method. Mechanical and physical properties tests to obtain hardness, ultimate tensile strength (UTS) and density are performed after solidification of specimens. The results show that hardness and tensile strength of aluminium based composite are higher than monolithic metal. Increasing the volume fraction of B4C, enhances the tensile strength and hardness of the composite; however over-loading of B4C caused particle agglomeration, rejection from molten metal and migration to slag. This phenomenon decreases the tensile strength and hardness of the aluminium based composite samples cast at 800 °C. For Al-15 vol% B4C samples, the ultimate tensile strength and Vickers hardness of the samples that were cast at 1000 °C, are the highest among all composites. To predict the mechanical properties of aluminium matrix composites, two key prediction modelling methods including Neural Network learned by Levenberg-Marquardt Algorithm (NN-LMA) and Thin Plate Spline (TPS) models are constructed based on experimental data. Although the results revealed that both mathematical models of mechanical properties of Al-B4C are reliable with a high level of accuracy, the TPS models predict the hardness and tensile strength values with less error compared to NN-LMA models.