Thermal evaluation of a low cost wood burner

Small-scale producers of dried products in rural areas of developing countries must often rely on sun drying to dry their crops, but this can be unreliable and produce an inferior product. There is therefore a need for simple and inexpensive combustion devices that can be fabricated and used locally. A wood burner has been constructed from a "200 litre" steel drum and has then been evaluated experimentally. The thermal efficiency of the burner was found to be 31% in two trials. An energy balance, calculated for three trials, was within + 16%. Approximately one third of the energy available in the wood was lost in the flue gases, either as sensible heat or unburned volatile gases. Excess combustion air through the burner was calculated and measured to be approximately 400% of the stoichiometric requirements. A significant amount of energy was required to heat the thermal mass surrounding the burner, indicating that a lightweight insulated structure would be more suitable in most circumstances.

Competition in the mature markets of professional versus final consumer information products

Factors are explored of decision making in regard to buying and/or upgrading information products. Mature information product markets are considered. Comparing two cases - professional and final consumer information products - the decision making process is considered on the choice of product variant. We distinguish three groups of users according to their ultimate decisions to either not to upgrade the existing system, or to upgrade it with the existing provider, or to switch to another provider. Consumer decision is based on multiple characteristics of information product quality, network effects, price and switching costs, whereas producers have to compete not only with their competitors, but also with the previous versions of the own products. Based on the considered cases, differences in consumer priorities are discussed in the markets of professional versus final consumer information products.

Scanners, brokers and providers : partners in developing learning programs

This paper reports some of the findings from a project that aimed to identify effective processes for ensuring that the content of learning activities is relevant to the changing needs of clients, and evolves so as to always incorporate the best available knowledge and science. This paper focuses on findings relating to the drivers for the development of new or substantially revised learning programs. The project, ‘Providing client-focussed education and training’, was funded by the FarmBis section of the Department of Agriculture, Fisheries and Forestry. The project also produced a self-assessment checklist for training providers to identify ways of improving the development and delivery of training. The key issues include continuous monitoring of client’s needs, and actively seeking opportunities to meet and work with industry organisations, other training providers and funding bodies.

There appear to be two drivers for the development of learning programs. One is problems or opportunities identified by people and organisations that could be termed ‘scanners’ and who tend not to be potential participants, the other is learning needs expressed by individuals or enterprises who want to participate in learning activities.

Scanners are typically industry organisations, government agencies and researchers, but may include providers and participants. Scanners identify learning needs that are not yet being expressed by potential participants, with the occasional exception of leading primary producers. Expressed participant needs drive the development of other programs. Providers become aware of the need for a new or substantially revised program, for example as a result of feedback from an existing program, because of legislative change or from delivering a similar program in other industries or contexts (for example computer training). Brokers (such as industry organisations who work to connect providers and participants) and ‘champions’ of training help participants identify and articulate their learning needs.

Developing effective learning programs : what extension can learn from the fields of adult education and learning communities

Learning is an investment in capacity building that has and will continue to reap rewards for primary producers and government in terms of increased sustainable production, profitability, exports, jobs and sustainable rural communities. Primary production operates in a context of continual change and requires up to date, complex and varied skills of primary producers and land managers.

A recent national research project funded by the Department of Agriculture, Forestry and Fisheries Australia confirmed that application of best practice from the theory of adult education in designing and developing learning programs in primary industry results in learning activities that provide information that is relevant to farmers’ needs, delivered in an entertaining way, and that draws on examples directly relevant to the participants. As a result, the training often exceeds the expectations of the participants.

The project produced a self-assessment checklist to identify ways of improving the development and delivery of training for extension practitioners and training providers. The key issues include continuous monitoring of client’s needs, and actively seeking opportunities to meet and work with industry organisations, other training providers and funding bodies.

There appear to be two drivers for the development of learning programs. One is problems or opportunities identified by people and organisations that could be termed ‘scanners’ and who tend not to be potential participants, the other is learning needs expressed by individuals or enterprises who want to participate in learning activities (participants). Scanners are typically industry organisations, government agencies and researchers, but may include providers and participants. Extension practitioners are well-placed to act as scanners.

It is very important that farmers and farmer organisations contribute to the development of new learning programs. Without industry input and support, extension practitioners and training providers cannot be expected to ensure they meet client needs. In other words, to develop effective learning programs, there must an industry learning community of producers, industry organisations, extension practitioners and training providers and other stakeholders such as supply chain enterprises, government and researchers.

Extension and the VET sector : time for closer alignment?

Extension (industry training) and VET (the formal vocational education and training system), each vital to Australia's education and training for agriculture, have developed as separate domains. Recent research suggests that the potential of closer alignment should be further explored. Extension provides usually non-certified courses to primary producers. The VET sector involves accredited training in a quality- assured national framework. Despite subsidy incentives for producers to access VET, they are increasingly interested in the short courses and flexible delivery offered by extension. This paper explores implications for improving outcomes from investment in training and for rural capacity building from a project in which a sample of management level extension courses across Australia was analysed for the extent of alignment with VET. 84 percent of these extension courses are mapped to training package competencies. The potential is there for VET to capture new enrolees for its diploma and advanced diploma courses. Closer alignment between sectors would facilitate this process.

Solar energy use for energy savings in dairy processing plants

New Zealand is one of the world’s largest producers of dairy products and has a climate with high levels of solar radiation; however, the use of solar energy in the dairy processing industry has received limited attention. An examination of historical records found that the annual peak in New Zealand milk production and processing occurs at a time when solar radiation levels are increasing markedly. An F-Chart analysis was used to simulate the performance of large-area arrays of solar collectors and to determine their suitability for heating and cooling in a dairy processing environment. For the study four types of solar collectors were analysed: glazed flat plates, evacuated tubes, evacuated tubes with CPC reflectors and a building-integrated solar collector under development at the University of Waikato (UoW). It was found that of these echnologies, both flat plate and evacuated tubes with CPC reflectors could make useful heating and cooling contributions. Furthermore, the solar fraction was determined mainly by the collector area to storage volume ratio. Finally, it was found that the UoW building-integrated solar collector could make a significant contribution to energy use in dairies and may be an attractive future technology for the industry.

Cashmere production and fleece attributes associated with farm of origin, age and sex of goat in Australia

Differences in cashmere production and fleece attributes associated with farm of origin, age and sex were quantified for commercial Australian cashmere goat enterprises. From 11 farms in four states, 1147 does and 97 wethers were monitored, representing 1- to 13-year-old goats. Individual clean cashmere production ranged from 21 to 389 g, with a mean ± standard deviation value of 134 ± 62 g. The mean cashmere production of 2-year-old does from different farms varied from 69 to 225 g and averaged 141 g. Mean ± s.d. greasy fleece weight was 394 ± 123 g, clean washing yield was 90.8 ± 4.1%, clean cashmere yield 33.4 ± 9.4%, cashmere fibre diameter 16.4 ± 1.6 µm, fibre curvature 48 ± 8.7 degrees/mm and staple length 8.7 ± 2.1 cm. There were large, commercially significant differences between farms for clean cashmere weight, mean fibre diameter and other attributes of cashmere. These were much larger than the effects of age and sex. Farm and age accounted for 42 to 67% of the variation in clean cashmere production, mean fibre diameter, fibre curvature, staple length and clean washing yield. Farm of origin affected clean cashmere yield, accounting for 24% of the variation. Sex of the goats had only a minor effect on the staple length of cashmere. The responses to age of clean cashmere weight, mean fibre diameter and the inverse of fibre curvature are very similar. Generally, cashmere production and mean fibre diameter increased with age. For the majority of farms, cashmere fibre curvature declined in a curvilinear manner with increases in age of goat. There were large differences in cashmere staple length from different farms, with means ranging from 7 to 12 cm. Between 1 and 2 years of age, the staple length of cashmere demonstrated a constant proportional increase. At ages older than 2 years, staple length either declined or increased by less than 1 cm with age, depending on the farm of origin. This study demonstrates that there are large gains in productivity that can be achieved from Australian cashmere goats. A better understanding of on-farm factors that influence cashmere production would enable all producers to optimise their production systems.

Development of strategies to increase commercial production of mohair and cashmere in Australia

We aimed to identify impediments to investing into mohair and cashmere production and to suggest programs and strategies to attract investors. Targeted interviews of people focussed on attributes of an investment opportunity. Analysis differentiated views of small and large-scale producers and those not involved in these industries. Potential investors into mohair and cashmere make decisions based on the compatibility of the enterprise to their farm system, the technical, financial and market feasibility of the enterprise and its comparative advantage with other possible courses of action. They are sceptical of information coming from within these industries that is not sufficiently supported by fact. There are many implications from these findings including the need for the industries to: understand the investment decision process; provide objective financial and benchmarking data; make information more accessible; overcome resistance to these industries; and increase the visibility of the industries.

An automated classification system based on the strings of trojan and virus families

Classifying malware correctly is an important research issue for anti-malware software producers. This paper presents an effective and efficient malware classification technique based on string information using several wellknown classification algorithms. In our testing we extracted the printable strings from 1367 samples, including unpacked trojans and viruses and clean files. Information describing the printable strings contained in each sample was input to various classification algorithms, including treebased classifiers, a nearest neighbour algorithm, statistical algorithms and AdaBoost. Using k-fold cross validation on the unpacked malware and clean files, we achieved a classification accuracy of 97%. Our results reveal that strings from library code (rather than malicious code itself) can be utilised to distinguish different malware families.

The cinema of Kathryn Bigelow : Hollywood transgressor

Kathryn Bigelow has undoubtedly been one of Hollywood's most significant female players, well known in popular terms for films such as Point Breakand Blue Steel, yet relatively unexplored in academia. Soundbites about women and guns and speculation about the role of ex-husband James Cameron ( Aliens, Titanic) in her career have often helped obscure rather than elucidate an understanding of her work. This collection explores how Bigelow can be seen to provide a point of intersection to a whole range of issues at the forefront of contemporary film studies and of the transformation of Hollywood into a post-classical cinema machine, with a particular emphasis on her most ambitious and controversial picture, Strange Days. Her place within new Hollywood is as a filmmaker that blurs genre conventions, reinscribes gender identites, and produces a breathless cinema of attractions.

The psychological and physical needs of workers impacting office design

Office design needs to be based on the needs of the most important producers of profit and value for any organisation – the workforce. Drivers affecting office design have been economics – space being often viewed as a cost-centre rather than a business enabler; and more recently, ideas that office design can impact organisational culture – resulting in the adoption of more collaborative working spaces in an attempt to force interaction. What is not always considered are the actual working styles
of the individuals and their motivations nor the requirements of the work itself. There is a need to profile not only the workforce, but also the work carried out. Recent research into space requirements for work is reviewed and reported with recommendations for better consideration of the psychological and physical needs of workers for office design.

Classification of malware based on string and function feature selection

Anti-malware software producers are continually challenged to identify and counter new malware as it is released into the wild. A dramatic increase in malware production in recent years has rendered the conventional method of manually determining a signature for each new malware sample untenable. This paper presents a scalable, automated approach for detecting and classifying malware by using pattern recognition algorithms and statistical methods at various stages of the malware analysis life cycle. Our framework combines the static features of function length and printable string information extracted from malware samples into a single test which gives classification results better than those achieved by using either feature individually. In our testing we input feature information from close to 1400 unpacked malware samples to a number of different classification algorithms. Using k-fold cross validation on the malware, which includes Trojans and viruses, along with 151 clean files, we achieve an overall classification accuracy of over 98%.

Unintentional needlestick injuries in livestock production : a case series and review

Livestock producers and their employees sometimes experience unintentional needlestick injury (NSI) while vaccinating or injecting medications into animals. There is little published regarding the medical complications that can develop from this occupational exposure. The objectives of this study were to (1) perform a retrospective review of animal-related NSIs treated at a tertiary medical center of a rural state; and (2) review the risks of NSI and measures to decrease their occurrence. Medical records of patients with NSI related to animal injection were identified from the University of Iowa Hospitals and Clinics database from 2002 to 2008 and reviewed. Nine patients received medical care for NSI that occurred while vaccinating farm animals. Most common NSI site was the nondominant hand and most occurred while attempting to inject the animal. Soft tissue infection was common and all nine received oral and/or intravenous antibiotics. Two thirds required hospital admission. Three required surgery and one had a bedside incision and drainage procedure. One patient had a serious inflammatory reaction with necrosis in the leg due to the oil adjuvant in the animal vaccine. Another case had a probable mycetoma with osteomyelitis and soft tissue infection due to the bacteria Streptomyces, which is a NSI complication not previously reported. Although medical complications from farm-related NSIs do not appear to be common, this case series illustrates how these injuries can be debilitating, costly, and lead to loss of work time and productivity. Producers and employees who inject livestock need to be aware of the risks and utilize measures to decrease unintentional NSI.

Staying healthy : the case of cotton and cane growers in Australia

Farmers and fishers have always been exposed to the vagaries of climate and global economic forces. However, in recent years there has been an accumulation of factors which are having a particularly severe impact upon rural Australia. The global financial crisis has negatively affected commodity prices and the viability of some rural communities is under threat. There is evidence to suggest that climate change is already impacting adversely on many primary producers and their ability to farm using traditional methods. Furthermore, many parts of rural Australia are still experiencing the effects of long-term drought and associated problems. Together, these circumstances can rightly be conceived of as 'difficult times'. Key areas recently identified in a decline in mental health among farmers include: increasing isolation, ongoing drought, increased government regulations, and a widening of the schism between urban and rural Australians. While there is a body of literature on behaviour around illness in the context of the stress of ' difficult times', there is little on preventative behaviours in these circumstances. This chapter reports preliminary findings from an exploratory research projects that investigates the process by which farmers and fishers achieve and maintain good physical and mental health in the context of 'difficult times'. The research takes a multiple case study approach, with five Australian sites, each with a different industry base, representing communities undergoing 'difficult times'. This chapter focuses on two of the sites and data obtained from interviews with farmers in the cotton and sugar industries. It discusses the behavioural choices that they make to maintain good physical health and mental wellbeing. These include choices about nutrition, physical activity, social connections such as participation in community, social or farm-related groups, opportunities for relaxation and regular medical check-ups.