Augmented optometry training simulator with multi-point haptics

Training of optometrists is traditionally achieved under close supervision of peers and superiors. With the rapid advancement in technology, medical procedures are performed more efficiently and effectively, resulting in faster recovery times and less trauma to the patient. However, application of this technology has made it difficult to effectively demonstrate and teach these manual skills as the education is now a combination of not only the medical procedure but also the use of the technology. In this paper we propose to increase the training capabilities of optometry students through haptically-enabled single-point and multi-point training tools as well as augmented reality techniques. Haptics technology allows a human to touch and feel virtual computer models as though they are real. Through physical connection to the operator, haptic devices are considered to be personal robots that are capable of improving the human-computer interaction with a virtual environment. These devices have played an increasing role in developing expertise, reducing instances of medical error and reducing training costs. A haptically-enabled virtual training environment, integrated with an optometry slit lamp instrument can be used to teach cognitive and manual skills while the system tracks the performance of each individual. These interactions would ideally replicate every aspect of the real procedure, consequently preparing the trainee for every possible scenario, without risking the health of a real patient.

Instrumental vision

This chapter interrogates stereo-immersive ‘virtual reality’ (VR), the technology that enables a perceiver to experience what it is like to be immersed in a simulated environment. While the simulation is powered by the “geometry engine” (Cutting, 1997: 31) associated with high-end computer imaging technology, the visual experience itself is powered by ordinary human vision: the vision system’s innate capacity to see “in 3D”. To understand and critically appraise stereo-immersive VR, we should study not its purported ‘virtuality’, but its specific visuality, because the ‘reality’ of a so-called ‘virtual environment’ is afforded by the stereoacuity of binocular vision itself. By way of such a critique of the visuality of stereo-immersive VR, this chapter suggests that we think about the ‘practice’ of vision, and consider on what basis vision can have its own ‘materiality’. Pictorial perception is proposed as an exemplary visual mode in which the possibilities of perception might emerge. Against the ‘possibilities’ of vision associated with pictures, the visuality of stereo-immersive VR emerges as a harnessing, or ‘instrumentalisation’ of vision’s innate capabilities. James J. Gibson’s ‘ecological’ approach to vision studies is referenced to show the degree to which developers of VR have sought — and succeeded — to mimic the ‘realness’ of ordinary perceptual reality. This raises a question concerning whether the success of stereo-immersive VR is simultaneously the source of its own perceptual redundancy: for to bring into being the perceptual basis of ordinary ‘real’ reality, is to return the perceiver to what is already familiar and known.

Graduating Students' Perceptions of Learning Design in an Undergraduate Engineering Course

BACKGROUNDUndergraduate Civil Engineering Course at Deakin University, Australia is relatively a new course. It graduated its second main cohort in 2013. Since its beginning in 2012, this study has been running an internal annual Course Experience Surveys targeted at uncovering the graduating students’ perceptions on three components of contemporary learning system provided by Deakin University learning design, learning environment and the human factor. Learning design covers the learning curriculum, learning resources, learning activities and learning supports; learning environment includes physical environment, virtual environment and psychosocial environment; and human factor includes learners, facilitators/teachers and help/support staff and their culture. There is a common agreement among educators in higher education that these three components of learning system should interact and complement each other in order to maximise student learning. This paper coversonly learning design aspect of the overall surveys from 2012 and 2013.PURPOSEThe aim of this study is to analyse the students’ perceptions of learning design provided by Deakin University to its undergraduate civil engineering students in 2012 and 2013. This will help track down the progresses in different aspects of learning design and to understand whether the learning design provided by the institution have actually helped students in their learning and met their learning expectations.DESIGN/METHODThis study adopts questionnaire approach to collect original data by asking students about their perceptions of learning design provided by the institution. 5-point Likert-scale questionnaire survey (strongly disagree, disagree, neutral, agree, strongly agree) is developed and responses are collected. The responses are then statistically analysed in order to uncover the students’ perceptions of learning design provided by the university.RESULTSThe statistical analysis shows that the graduating students in both 2012 and 2013 did not perceive some important aspects of the learning design of the undergraduate civil engineering program/course as good as they expected. Moreover, in line with the shift in the learning design paradigm from content-centric to more inclusive learning design where soft skills, self-directed learning skills and research skills are incorporated, graduating students clearly perceived these changes. However, respondents’ perceptions on some components of learning design got slightly down in 2013 compared with 2012 particularly the ‘learning resources’, ‘learning activities’ and ‘learning supports’.CONCLUSIONSThe shift in the learning design paradigm of the undergraduate civil engineering program/course at Deakin University from teacher-centric to student-centric between 2012 and 2013 has not been perceived by students positively as expected. Students have clearly indicated that they prefer improved curriculum, quality learning resources, customised learning activities and additional learning supports in order to successfully implement student-centric learning design.

Multipoint haptic guidance for micrograsping systems

The ability to perform accurate micromanipulation offers wide-reaching benefits and is of increasing interest to researchers. Recent research into microgripper, microtweezer, and microforcep systems contributes toward accurate micrograsping and manipulation. Despite these efforts, achieving adequate operator control remains a distinct research challenge. Haptic interfaces interact with the human's haptic modality and offer the ability to enhance the operator's controllability of micromanipulation systems. Our previous work introduced single-point haptic guidance to assist the operator during intracellular microinjection. This paper extends the approach to propose multipoint haptic guidance for micrograsping tasks. Accurate micrograsping is valuable in many applications, including microassembly and biomanipulation. A multipoint haptic gripper facilitates haptic interaction, and haptic guidance assists the operator in controlling systems suitable for micrograsping. Force fields are used to guide the operator to suitable grasp points on micrometer-sized objects and consist of attractive and repulsive forces. The ability of the force field to effectively assist the operator in grasping the cell is evaluated using a virtual environment. Evaluation results demonstrate the ability of the approach to significantly reduce participants' average grasping error.

Activity and flight trajectory monitoring of mosquito colonies for butomated behaviour analysis

Monitoring and tracking of mosquitoes using image processing is important to facilitate the mosquitos’ behaviour analysis automatically over longer period of times. In this paper, we propose a simple methodology to monitor mosquitos’ activity using multiple cameras optimally placed. In order to ensure optimal camera coverage for the area of observation and desired image quality; we propose to simulate the experimental setup in a 3D virtual environment to obtain one-off optimum camera placement parameters. Our proposed methodology is demonstrated to have improved the activity monitoring process using two cameras for accurate count of occluded mosquitoes and 3D trajectory path reconstruction. This framework will enable working out more challenging tasks of constructing 3D trajectories using information received from multiple low quality cameras, which provide inconsistent and discontinuous trajectories.

The role of serious games in robot exoskeleton-assisted rehabilitation of stroke patients

his chapter describes how serious games can be used to improve the rehabilitation of stroke patients. Determining ideal training conditions for rehabilitation is difficult, as no objective measures exist and the psychological state of patients during therapy is often neglected. What is missing is a way to vary the difficulty of the tasks during a therapy session in response to the patient needs, in order to adapt the training specifically to the individual. In this chapter, we describe such a method. A serious game is used to present challenges to the patient, including motor and cognitive tasks. The psychological state of the patient is inferred from measures computed from heart rate variability (HRV) as well as breathing frequency, skin conductance response, and skin temperature. Once the psychological state of the patient can be determined from these measures, it is possible to vary the tasks in real time by adjusting parameters of the game. The serious game aspect of the training allows the virtual environment to become adaptive in real time, leading to improved matching of the activity to the needs of the patient. This is likely to lead to improved training outcomes and has the potential to lead to faster and more complete recovery, as it enables training that is challenging yet does not overstress the patient.

Prospective memory while driving : comparison of time- and event-based intentions

Prospective memories can divert attentional resources from ongoing activities. However, it is unclear whether these effects and the theoretical accounts that seek to explain them will generalise to a complex real-world task such as driving. Twenty-four participants drove two simulated routes while maintaining a fixed headway with a lead vehicle. Drivers were given either event-based (e.g. arriving at a filling station) or time-based errands (e.g. on-board clock shows 3:30). In contrast to the predominant view in the literature which suggests time-based tasks are more demanding, drivers given event-based errands showed greater difficulty in mirroring lead vehicle speed changes compared to the time-based group. Results suggest that common everyday secondary tasks, such as scouting the roadside for a bank, may have a detrimental impact on driving performance. The additional finding that this cost was only evident with the event-based task highlights a potential area of both theoretical and practical interest. Practitioner Summary: Drivers were given either time- or event-based errands whilst engaged in a simulated drive. We examined the effect of errands on an ongoing vehicle follow task. In contrast to previous non-driving studies, event-based errands are more disruptive. Common everyday errands may have a detrimental impact on driving performance.

Building computational virtual reality environment for anesthesia

In this paper, a Computational Virtual Reality Environment for Anesthesia (CVREA) is proposed. Virtual reality, data mining, machine learning techniques will be explored to develop (1) an immersive and interactive training platform for anaesthetists, which can greatly improve their training and learning performance; (2) a knowledge learning environment which collects clinical data with greater richness, process data with more efficacy, and facilitate knowledge discovery in anaesthesiology.

Computer-simulated environment for training : challenge of efficacy evaluation

Computer-assisted instruction has been around for decades. There has been much speculation about the benefits of computer-mediated learning. Numerous applications have been developed in different domains incorporated with emerging technologies. In recently years, advanced technologies, such as Augmented Reality (AR) and Virtual Reality (VR), have received much attention in their potential of creating interactive learning experience for the users. However, related literature and empirical studies indicated that learning effects in computer-simulated environments or Virtual Environments (VEs) are not systematically tested. Furthermore, the performance and learning in computer-simulated learning environment need to be evaluated through more rigorous methods. This paper suggests that 1) the efficacy of VEs is subject to a close examination, not only in terms of how VE-based training systems are easy of use, but also in terms of how effective learning is; 2) evaluation of learning in computer simulated learning environments is required to be reconsidered in terms of theoretical basis and evaluation methodologies that are relevant to the measurement of training effectiveness in computer-simulated virtual learning environment. This paper explains on how learning can be assessed in VEs through the lens of training evaluation.

Investigation into the interactive multimedia production processes of novice multimedia designer /producers in a constructivist environment

The main purpose of this study was to investigate the instructional interactive multimedia (IMI) production processes of adult novice multimedia production course. The study aimed at discovering whether a constructivistic teacher-learning environment facilitated these multimedia novice designer / producers to further develop metacognitivestates of higher-order thinking like schema formation, problem-solving and cognitive construction when producing their interactive multimedia project. To achieve this study examined the facilitative and limiting activities in planning, design and development that have assisted or hindered the NMDPs during their multimedia production work This research utilises a qualitative paradigm and makes extensive use of multiple data sources such as the participants’ proposals, planning aids, logs and final projects for single as well as cross-case analyses and discussion. Three cases were selected for in-depth analysis in the study because they provided interviews and more complete documentation and "thick descriptions" of their multimedia production activities. Findings about the NMDPs multimedia production endeavours showed that they learnt best about multimedia technology for teacing and learning by producing an interactive multimedia project themselves. Factors that enabled some of the NMDPs to flourish in a constructivistic environment included their ability to utilise their new and extended schemata to problem solve, their self regulation and a creative and positive attitude to demanding multimedia work NMDPs who utilised facilitative planning aids and design strategies produced impressive work. The study further indicates that the NMDPs’ holistic multimedia production experience made them aware of the levels of complexity involved and boosted their confidence about multimedia production for educational purposes. Suggestions for further research include examining the production styles of adult multimedia novices and young novices and investigating the implications of designing multimedia for large audience presentation rather than for single or small group learner usage.

Touching space : using motion capture and stereo projection to create a virtual haptics of dance

This paper describes the work of a group of artists in Australia who used real-time motion capture and 3D stereo projection to create a large-scale performance environment in which dancers seemed to "touch" the volume. This project re-versions Suzanne Langer's 1950s philosophy of dance as "virtual force" to realize the idea of a "virtual haptics" of dance that extends the dancer's physical agency literally across and through the surrounding spatial volume. The project presents a vision of interactive dance performance that "touches" space by visualizing kinematics as intentionality and agency. In doing so, we suggest the possibility of new kinds of human-computer interfaces that emphasize touch as embodied, nuanced agency that is mediated by the subtle qualities of whole-body movement, in addition to more goal-oriented, task-based gestures such as pointing or clicking.

Virtual melawati : 3D GIS as a decision support tool for urban planning

Virtual Melawati is an environment for developing expertise in the application of 3D interactive visualization and GIS (Geographic Information System) to address problems of the built environment and to test the model as a decision support tool in the context of the local planning authorities in Malaysia. The visual approach enables the integration of highly complex spatial GIS information such as the evolution and transformation of the urban precinct as well as the impact of planned developments into the decision making process. The study will examine the techniques of data acquisition, data reconstruction from physical to digital, urban analysis and visualization in constructing an interactive 3D GIS model to support and assist the decision making process in urban design and planning. The outcomes of the study will deliver an experimental test bed for improving decision making processes in urban planning and design utilizing 3D modeling and GIS. The project will accelerate the uptake of digital and multimedia methods in local government, facilitate current planning and consultation processes between councils and stakeholders and improve the dissemination and management of spatial information about urban environments.

An empirical examination of feedback : user control and performance in a hapto-audio-visual training environment

Utilising advanced technologies, such as virtual environments (VEs), is of importance to training and education. The need to develop and effectively apply interactive, immersive 3D VEs continues to grow. As with any emerging technology, user acceptance of new software and hardware devices is often difficult to measure and guidelines to introduce and ensure adequate and correct usage of such technologies are lacking. It is therefore imperative to obtain a solid understanding of the important elements that play a role in effective learning through VEs. In particular, 3D VEs may present unusual and varied interaction and adoption considerations. The major contribution of this study is to investigate a complex set of interrelated factors in the relatively new sphere of VEs for training and education. Although many of the factors appears to be important from past research, researcher have not explicitly studied a comprehensive set of inter-dependant, empirically validated factors in order to understand how VEs aid complex procedural knowledge and motor skill learning. By integrating theory from research on training, human computer interaction (HCI), ergonomics and cognitive psychology, this research proposes and validates a model that contributes to application-specific VE efficacy formation. The findings of this study show visual feedback has a significant effect on performance. For tactile/force feedback and auditory feedback, no significant effect were found. For satisfaction, user control is salient for performance. Other factors such as interactivity and system comfort, as well as level of task difficulty, also showed effects on performance.

Virtual reality interaction techniques

This paper addresses the problems associated with interaction in immersive virtual reality and makes recommendations as to how best to deal with these problems, thereby producing a usable virtual reality interactive environment. Immersive virtual reality means that the users are immersed or contained inside the environment in which they are working. For example, they are able to turn their heads and look around, as well as use their bodies to control the system.

The work in progress involves a study of various virtual reality input devices, some designed and implemented as part of the project. Additionally, the paper describes a simple framework for separation of the interaction and application parts of a virtual reality system in order to facilitate an object oriented approach to the implementation of the recommendations, and to the building of future virtual reality applications which incorporate these ideas.

Dealing with rogue virtual machines in a cloud services environment

In current cloud services hosting solutions, various mechanisms have been developed to minimize the possibility of hosting staff from breaching security. However, while functions such as replicating and moving machines are legitimate actions in clouds, we show that there are risks in administrators being able to perform them. We describe three threat scenarios related to hosting staff on the cloud architecture and indicate how an appropriate accountability architecture can mitigate these risks in the sense that the attacks can be detected and the perpetrators identified. We identify requirements and future research and development needed to protect cloud service environments from these attacks.