Heterogeneous electrode processes and localized corrosion

This book covers the areas of electrochemical heterogeneity and electrode inhomogeneity and their effects on nonuniform electrode processes, in particular, localized corrosion. It covers the fundamentals, experimental methods, and engineering aspects of electrochemical heterogeneity.

Predator behaviour and predation risk in the heterogeneous Arctic environment

1. Habitat heterogeneity and predator behaviour can strongly affect predator–prey interactions but these factors are rarely considered simultaneously, especially when systems encompass multiple predators and prey.

2. In the Arctic, greater snow geese Anser caerulescens atlanticus L. nest in two structurally different habitats: wetlands that form intricate networks of water channels, and mesic tundra where such obstacles are absent. In this heterogeneous environment, goose eggs are exposed to two types of predators: the arctic fox Vulpes lagopus L. and a diversity of avian predators. We hypothesized that, contrary to birds, the hunting ability of foxes would be impaired by the structurally complex wetland habitat, resulting in a lower predation risk for goose eggs.

3. In addition, lemmings, the main prey of foxes, show strong population cycles. We thus further examined how their fluctuations influenced the interaction between habitat heterogeneity and fox predation on goose eggs.

4. An experimental approach with artificial nests suggested that foxes were faster than avian predators to find unattended goose nests in mesic tundra whereas the reverse was true in wetlands. Foxes spent 3·5 times more time between consecutive attacks on real goose nests in wetlands than in mesic tundra. Their attacks on goose nests were also half as successful in wetlands than in mesic tundra whereas no difference was found for avian predators.

5. Nesting success in wetlands (65%) was higher than in mesic tundra (56%) but the difference between habitats increased during lemming crashes (15%) compared to other phases of the cycle (5%). Nests located at the edge of wetland patches were also less successful than central ones, suggesting a gradient in accessibility of goose nests in wetlands for foxes.

6. Our study shows that the structural complexity of wetlands decreases predation risk from foxes but not avian predators in arctic-nesting birds. Our results also demonstrate that cyclic lemming populations indirectly alter the spatial distribution of productive nests due to a complex interaction between habitat structure, prey-switching and foraging success of foxes.

Sizing the association between lifestyle behaviours and fatness in a large, heterogeneous sample of youth of multiple ethnicities from 4 countries

Background: 

RGO/ZnO nanocomposite: an efficient, sustainable, heterogeneous, amphiphilic catalyst for synthesis of 3-substituted indoles in water

A nanocomposite consisting of reduced graphene oxide and zinc oxide nanoparticles (RGO/ZnO) with unique structural features was developed as an efficient, sustainable, amphiphilic, heterogeneous catalyst for the synthesis of various 3-substituted indoles in water. The catalyst was recycled six times without significant loss in catalytic activity. The higher environmental compatibility and sustainability factors such as smaller E-factor and higher atom economy make the present methodology a true green and sustainable process for the synthesis of various biologically important 3-substituted indoles.

Selective visuo-haptic rendering of heterogeneous objects in 'parallel universes'

 Haptic rendering of complex models is usually prohibitive due to its much higher update rate requirement compared to visual rendering. Previous works have tried to solve this issue by introducing local simulation or multi-rate simulation for the two pipelines. Although these works have improved the capacity of haptic rendering pipeline, they did not take into consideration the situation of heterogeneous objects in one scenario, where rigid objects and deformable objects coexist in one scenario and close to each other. In this paper, we propose a novel idea to support interactive visuo-haptic rendering of complex heterogeneous models. The idea incorporates different collision detection and response algorithms and have them seamlessly switched on and off on the fly, as the HIP travels in the scenario. The selection of rendered models is based on the hypothesis of “parallel universes”, where the transition of rendering one group of models to another is totally transparent to users. To facilitate this idea, we proposed a procedure to convert the traditional single universe scenario into a “multiverse” scenario, where the original models are grouped and split into each parallel universe, depending on the scenario rendering requirement rather than just locality. We also proposed to add simplified visual objects as background avatars in each parallel universe to visually maintain the original scenario while not overly increase the scenario complexity. We tested the proposed idea in a haptically-enabled needle thoracostomy training environment and the result demonstrates that our idea is able to substantially accelerate visuo-haptic rendering with complex heterogeneous scenario objects.

Atom probe tomography investigation of heterogeneous short-range ordering in the 'komplex' phase state (K-state) of Fe-18Al (at.%)

We study an Fe-18Al (at.%) alloy after various thermal treatments at different times (24-336 h) and temperatures (250-1100 °C) to determine the nature of the so-called 'komplex' phase state (or "K-state"), which is common to other alloy systems having compositions at the boundaries of known order-disorder transitions and is characterised by heterogeneous short-range-ordering (SRO). This has been done by direct observation using atom probe tomography (APT), which reveals that nano-sized, ordered regions/particles do not exist. Also, by employing shell-based analysis of the three-dimensional atomic positions, we have determined chemically sensitive, generalised multicomponent short-range order (GM-SRO) parameters, which are compared with published pairwise SRO parameters derived from bulk, volume-averaged measurement techniques (e.g. X-ray and neutron scattering, Mössbauer spectroscopy) and combined ab-initio and Monte Carlo simulations. This analysis procedure has general relevance for other alloy systems where quantitative chemical-structure evaluation of local atomic environments is required to understand ordering and partial ordering phenomena that affect physical and mechanical properties.

The asymptotic distribution of the CADF unit root test in the presence of heterogeneous AR(p) errors

The CADF test of Pesaran (J Appl Econ 22:265–312, 2007) are among the most popular univariate tests for cross-section correlated panels around. Yet, the existing asymptotic analysis of this test statistic is limited to a model in which the errors are assumed to follow a simple AR(1) structure with homogenous autoregressive coefficients. One reason for this is that the model involves an intricate identification issue, as both the serial and cross-section correlation structures of the errors are unobserved. The purpose of the current paper is to tackle this issue and in so doing extend the existing analysis to the case of AR((Formula presented.)) errors with possibly heterogeneous coefficients.

Heterogeneous atrophy occurs within individual lower limb muscles during 60 days of bed rest

To better understand disuse muscle atrophy, via magnetic resonance imaging, we sequentially measured muscle cross-sectional area along the entire length of all individual muscles from the hip to ankle in nine male subjects participating in 60-day head-down tilt bed rest (2nd Berlin BedRest Study; BBR2-2). We hypothesized that individual muscles would not atrophy uniformly along their length such that different regions of an individual muscle would atrophy to different extents. This hypothesis was confirmed for the adductor magnus, vasti, lateral hamstrings, medial hamstrings, rectus femoris, medial gastrocnemius, lateral gastrocnemius, tibialis posterior, flexor hallucis longus, flexor digitorum longus, peroneals, and tibialis anterior muscles (P ≤ 0.004). In contrast, the hypothesis was not confirmed in the soleus, adductor brevis, gracilis, pectineus, and extensor digitorum longus muscles (P ≥ 0.20). The extent of atrophy only weakly correlated (r = -0.30, P < 0.001) with the location of greatest cross-sectional area. The rate of atrophy during bed rest also differed between muscles (P < 0.0001) and between some synergists. Most muscles recovered to their baseline size between 14 and 90 days after bed rest, but flexor hallucis longus, flexor digitorum longus, and lateral gastrocnemius required longer than 90 days before recovery occurred. On the basis of findings of differential atrophy between muscles and evidence in the literature, we interpret our findings of intramuscular atrophy to reflect differential disuse of functionally different muscle regions. The current work represents the first lower-limb wide survey of intramuscular differences in disuse atrophy. We conclude that intramuscular differential atrophy occurs in most, but not all, of the muscles of the lower limb during prolonged bed rest.

Heterogeneous copper concentrations in cancerous human prostate tissues

© 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc. Background Therapeutics that target copper for the treatment of prostate cancer are being evaluated in human clinical trials. Elevated intracellular copper is considered to sensitize prostate cancer cells to certain copper-coordination compounds, especially those with ionophoric properties. While there is compelling in vitro evidence that prostate cancer cells accumulate intracellular copper, a corresponding status for copper in patient tissues has not been corroborated. We therefore established whether copper concentrations increase in cancerous prostate tissues, and in sera, in patients throughout disease progression. Methods Human prostate tissue samples were obtained from patient prostatectomies (n=28), and together with patient-matched sera, were analyzed for copper content by inductively coupled plasma mass spectrometry. Results When grouped together, cancerous prostate tissues exhibiting moderate disease severity (Gleason Score 7) (n=10) had 1.6-fold more copper than age-matched normal tissues (n=10) (P<0.05). Those with more aggressive disease (Gleason Score 9) (n=8) had 1.8-fold more copper (P<0.05). In both disease stages however, the copper concentrations between individual samples were rather variable (0.55-3.02μg/g), with many clearly within the normal range (0.52-1.28μg/g). Additionally, we found that there was no change in serum copper concentrations in patients with either moderate or aggressive prostate cancer (Gleason Score 7 or 9), compared with reference intervals and to age-matched controls. Conclusions The heterogeneous nature of copper concentrations in cancerous prostate tissues, suggest that a small subset of patients may respond to treatments that target elevated intratumoral copper. Therefore, such approaches would likely require personalized treatment strategies. Prostate 75:1510-1517, 2015.

An improved consensus-based group decision making model with heterogeneous information

In group decision making (GDM) problems, it is natural for decision makers (DMs) to provide different preferences and evaluations owing to varying domain knowledge and cultural values. When the number of DMs is large, a higher degree of heterogeneity is expected, and it is difficult to translate heterogeneous information into one unified preference without loss of context. In this aspect, the current GDM models face two main challenges, i.e., handling the complexity pertaining to the unification of heterogeneous information from a large number of DMs, and providing optimal solutions based on unification methods. This paper presents a new consensus-based GDM model to manage heterogeneous information. In the new GDM model, an aggregation of individual priority (AIP)-based aggregation mechanism, which is able to employ flexible methods for deriving each DM's individual priority and to avoid information loss caused by unifying heterogeneous information, is utilized to aggregate the individual preferences. To reach a consensus more efficiently, different revision schemes are employed to reward/penalize the cooperative/non-cooperative DMs, respectively. The temporary collective opinion used to guide the revision process is derived by aggregating only those non-conflicting opinions at each round of revision. In order to measure the consensus in a robust manner, a position-based dissimilarity measure is developed. Compared with the existing GDM models, the proposed GDM model is more effective and flexible in processing heterogeneous information. It can be used to handle different types of information with different degrees of granularity. Six types of information are exemplified in this paper, i.e., ordinal, interval, fuzzy number, linguistic, intuitionistic fuzzy set, and real number. The results indicate that the position-based consensus measure is able to overcome possible distortions of the results in large-scale GDM problems.

Optimal power allocation and load distribution for multiple heterogeneous multicore server processors across clouds and data centers

For multiple heterogeneous multicore server processors across clouds and data centers, the aggregated performance of the cloud of clouds can be optimized by load distribution and balancing. Energy efficiency is one of the most important issues for large-scale server systems in current and future data centers. The multicore processor technology provides new levels of performance and energy efficiency. The present paper aims to develop power and performance constrained load distribution methods for cloud computing in current and future large-scale data centers. In particular, we address the problem of optimal power allocation and load distribution for multiple heterogeneous multicore server processors across clouds and data centers. Our strategy is to formulate optimal power allocation and load distribution for multiple servers in a cloud of clouds as optimization problems, i.e., power constrained performance optimization and performance constrained power optimization. Our research problems in large-scale data centers are well-defined multivariable optimization problems, which explore the power-performance tradeoff by fixing one factor and minimizing the other, from the perspective of optimal load distribution. It is clear that such power and performance optimization is important for a cloud computing provider to efficiently utilize all the available resources. We model a multicore server processor as a queuing system with multiple servers. Our optimization problems are solved for two different models of core speed, where one model assumes that a core runs at zero speed when it is idle, and the other model assumes that a core runs at a constant speed. Our results in this paper provide new theoretical insights into power management and performance optimization in data centers.