Exploring molecular changes at the surface of polypropylene after accelerated thermomolecular adhesion treatments

A central composite rotatable design (CCRD) method was used to investigate the performance of the accelerated thermomolecular adhesion process (ATmaP), at different operating conditions. ATmaP is a modified flame-treatment process that features the injection of a coupling agent into the flame to impart a tailored molecular surface chemistry on the work piece. In this study, the surface properties of treated polypropylene were evaluated using X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). All samples showed a significant increase in the relative concentration of oxygen (up to 12.2%) and nitrogen (up to 2.4%) at the surface in comparison with the untreated sample (0.7% oxygen and no detectable nitrogen) as measured by XPS. ToF-SIMS and principal components analysis (PCA) showed that ATmaP induced multiple reactions at the polypropylene surface such as chain scission, oxidation, nitration, condensation, and molecular loss, as indicated by changes in the relative intensities of the hydrocarbon (C₃H₇⁺ , C₃H₅⁺ , C₄H₇⁺, and C₅H₉⁺), nitrogen and oxygen-containing secondary ions (C₂H₃O⁺, C₃H₈N⁺, C₂H₅NO⁺, C₃H₆NO⁺, and C₃H₇NO⁺). The increase in relative intensity of the nitrogen oxide ions (C₂H₅NO⁺ and C₃H₇NO⁺) correlates with the process of incorporating oxides of nitrogen into the surface as a result of the injection of the ATmaP coupling agent.

Comparison of aspirin and indomethacin pre-treatments on the responses to reduced renal artery pressure in conscious dogs

To examine the role of prostaglandins in physiologically induced renin release, we reduced renal artery pressure within the autoregulatory range in chronically instrumented conscious dogs with aspirin, indomethacin or no pre-treatment. In untreated dogs, reduction of renal artery pressure to 60 mmHg for 90 min produced rises in plasma renin activity (+ 5.4 +/- 1.0 ng ml.-1 hr-1) and mean arterial pressure (+ 17 +/- 2 mmHg) without significant effect on renal blood flow (n = 13). Aspirin pre-treatment (2 X 25-40 mg kg-1 orally) had no effect on the renin, arterial pressure or renal blood flow responses to renal artery pressure reduction (n = 7). In contrast, indomethacin pre-treatment (2 X 2-3 mg kg-1 orally) significantly lessened the increase in plasma renin activity during reduced renal artery pressure (+ 2.0 +/- 0.3 ng ml.-1 hr-1, n = 11). The relative effectiveness of aspirin and indomethacin in inhibiting prostaglandin production in the kidney was then tested in separate experiments by measuring the renal blood flow responses to renal artery injections of arachidonate (5-200 micrograms kg-1). In the doses used above, aspirin markedly attenuated the blood flow response to arachidonate but indomethacin had almost no effect. Both aspirin and indomethacin abolished the hypotensive effect of intravenous arachidonate (0.5 mg kg-1). These results tentatively suggest that indomethacin may not effectively inhibit renal prostaglandin production in conscious dogs at the doses used in these experiments. Thus the reduced renin release in response to lowered renal artery pressure in indomethacin pre-treated dogs may have been due to another, non-prostaglandin action of indomethacin. The results from the aspirin pre-treated dogs suggest that prostaglandins are not involved in the release of renin in response to reduced renal artery pressure in conscious dogs.

Deformation and frictional heating in relation to wear in sheet metal stamping

In the automotive industry, press production rates often need to be reduced in order to minimize tool wear issues and successfully stamp advanced high strength steels. This indicates that heating affects may be important. This paper examines friction and deformational heating at the die radius during sheet metal stamping, using finite element analysis. The results show that high temperatures, of up to 130°C, can occur at the die radius surface. Such behavior has not been previously reported in the literature, for what is expected to be ‘cold’ sheet metal stamping conditions. It will be shown that the temperature rise is due to the increased contact stresses and increased plastic work, associated with stamping AHSS. Consequently, new insights into the local contact conditions in sheet metal stamping were obtained. The outcomes of this work may impact the wear models and tests employed for future tool wear analyses in sheet metal stamping.

Mechanically alloyed and spark plasma sintered aluminium/precious metal oxide composite materials

Air-atomised pure aluminium powder with additions of 10 at.% of AgO, PtO₂ or PdO was mechanically alloyed (MAed) by using a vibrational ball mill, and MAed powders were consolidated into bulk materials by a spark plasma sintering (SPS) process. Mechano-chemical reactions among pure Al, precious metal oxide and stearic acid, added as a process control agent, during the mechanical alloying (MA) process and subsequent heat treatments were investigated by X-ray diffraction. The mechanical properties of MAed powders obtained under various heat treatment conditions and those of the SPS materials were evaluated by hardness tests. Mechano-chemical reactions occurred in Al/precious metal oxide composite powders during 36 ks of the MA process to form AlAg₂, Pt and Al₃Pd₂ for the Al-AgO, Al-PtO₂ and Al-PdO systems, respectively. Further solid-state reactions in MAed powders have been observed after heating at 373 K to 873 K for 7.2 ks. The hardness of MAed powders initially increased significantly after heating at 373 K and then generally decreased with increasing heating temperatures. The full density was obtained for the SPS materials under the conditions of an applied pressure of 49 MPa at 873 K for 3.6 ks. All the SPS materials exhibited hardness values of over 200 HV in the as-fabricated state.

Antioxidant treatments for schizophrenia

The overall objective of the review is to evaluate the effect of antioxidants as add-on treatments to standard antipsychotic medication for improving acute psychotic episodes and core symptoms and preventing relapse in people with schizophrenia.

Solar industrial process heating in Australia - Past and current status

Thirty years ago in Australia, there was a significant research, development and demonstration programme in solar industrial process heating (SIPH). This activity was led principally by the Commonwealth Science and Industrial Research Organisation, the country’s main scientific research body. Other state government bodies also funded demonstration projects. Today, there is very little SIPH activity at any level in Australia. The contrast with the progress in other renewable energy technologies like wind and solar photovoltaic systems is striking. While the implementation of these technologies has progressed, SIPH has gone backwards. If Australia is to decarbonise its economy at the rate required, a massive deployment of solar thermal technology in those industries which use large quantities of low temperature hot water is also required. Recent developments nationally and internationally may rekindle new applications of solar thermal energy use by industry. This paper reviews the past achievements in SIPH in Australia and describes the lessons learned in order to better prepare for any new wave of SIPH activity.

Double-layer and hydration forces measured between silica sheets subjected to various surface treatments

Force measurements between silica surfaces in aqueous solutions of NaCl are reported. Silica is prepared with one of three surface treatments: (i) flaming, (ii) exposure to steam for 150 h, and (iii) brief exposure to ammonia vapor. Analysis of electrical double-layer interactions indicates that the surface density of silanol groups increases with steam treatment, and that exposure to ammonia etches the surface slightly and renders it porous. The force at short range is dominated by a strong repulsion which is attributed to hydration of the surface. The hydration component of the force is not significantly affected by the surface treatments, nor by electrolyte concentration over the range investigated (up to 0.1 M).

Achieving a chromium rich surface upon steels via FBR-CVD chromising treatments

Surface alloying via fluidised bed reactor (FBR) chemical vapour deposition (CVD) can be used to produce adherent and highly corrosion resistant surface layers. In this work, 304, 316, and 409 stainless steels and 1020 steel were chromised, producing distinct surface layers tens of micrometres thick. The composition and surface of these layers was characterised using microscopy, GDOES, and XPS. Surfaces were highly enriched in Cr and displayed improved corrosion resistance as determined by electrochemical evaluations. This work demonstrates that it is possible to form continuous, functional and corrosion resistant Cr-rich surface layers via FBR-CVD on a variety of steels.

The effect of alternate heating rates during cure on the structure-property relationships of epoxy/MMT clay nanocomposites

This paper investigates the effect of both the mixing technique and heating rate during cure on the dispersion of montmorillonite (MMT) clay in an epoxy resin. The combination of sonication and using a 10. °C/min heating rate during cure was found to facilitate the dispersion of nanoclay in epoxy resin. These processing conditions provided a synergistic effect, making it possible for polymer chains to penetrate in-between clay galleries and detach platelets from their agglomerates. As the degree of dispersion was enhanced, the flexural modulus and strength properties were found to decrease by 15% and 40%, respectively. This is thought to be due to individual platelets fracturing in the nanocomposite. Complementary techniques including X-ray diffraction (XRD), small angle X-ray scattering (SAXS), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX), transmission electron microscopy (TEM) and optical microscopy were essential to fully characterise localised and spatial regions of the clay morphologies.

A consensus statement for safety monitoring guidelines of treatments for major depressive disorder

Objective: This paper aims to present an overview of screening and safety considerations for the treatment of clinical depressive disorders and make recommendations for safety monitoring.
Method: Data were sourced by a literature search using MEDLINE and a manual search of scientific journals to identify relevant articles. Draft guidelines were prepared and serially revised in an iterative manner until all co-authors gave final approval of content.
Results: Screening and monitoring can detect medical causes of depression. Specific adverse effects associated with antidepressant treatments may be reduced or identified earlier by baseline screening and agent-specific monitoring after commencing treatment.
Conclusion: The adoption of safety monitoring guidelines when treating clinical depression is likely to improve overall physical health status and treatment outcome. It is important to implement these guidelines in the routine management of clinical depression.