Use of calcium, folate and vitamin D3-fortified milk for 6 months improves nutritional status but not bone mass or turnover, in a group of Australia aged care

In residential care, inadequate calcium and folate intakes and low serum vitamin D (25(OH)D) concentrations are common. We assessed whether daily provision of calcium, folate, and vitamin D3-fortified milk for 6 months improved nutritional status (serum micronutrients), bone quality (heel ultrasound), bone turnover markers (parathyroid hormone, C-terminal collagen I telopeptide, terminal propeptide of type I procollagen), and/or muscle strength and mobility in a group of Australian aged care residents. One hundred and seven residents completed the study (mean (SD) age: 79.9 (10.1) years; body weight: 68.4 (15.4) kg). The median (inter-quartile range) volume of fortified milk consumed was 160 (149) ml/day. At the end of the study, the median daily vitamin D intake increased to 10.4 (8.7) μg (P < .001), which is 70% of the adequate intake (15 μg); and calcium density (mg/MJ) was higher over the study period compared with baseline (161 ± 5 mg/MJ vs. 142 ± 4 mg/MJ, P < .001). Serum 25(OH)D concentrations increased by 23 ± 2 nmol/L (83 (107)%, P < .001), yet remained in the insufficient range (mean 45 ± 2 nmol/L). Consumption of greater than the median intake of milk (160 ml/day) (n = 54, 50%) increased serum 25(OH)D levels into the adequate range (53 ± 2 nmol/L) and reduced serum parathyroid hormone by 24% (P = .045). There was no effect on bone quality, bone turnover markers, muscle strength, or mobility. Consumption of fortified milk increased dietary vitamin D intake and raised serum 25(OH)D concentrations, but not to the level thought to reduce fracture risk. If calcium-fortified milk also was used in cooking and milk drinks, this approach could allow residents to achieve a dietary calcium intake close to recommended levels. A vitamin D supplement would be recommended to ensure adequate vitamin D status for all residents.

Dietary fiber, potassium, magnesium and calcium in relation to the risk of preeclampsia

To explore the relation between preeclampsia risk and maternal intake of dietary fiber, potassium, magnesium and calcium. STUDY DESIGN: We conducted a case-control study of 172 preeclamptics and 339 normotensive controls. Maternal dietary intake was assessed using a food frequency questionnaire. Logistic regression procedures were used to estimate the association between each dietary factor and preeclampsia risk. RESULTS: Fiber intake was inversely associated with the risk of preeclampsia. When extreme quartiles of total fiber intake were compared, the odds ratio (OR) for preeclampsia was 0.46 (95% confidence interval [CI] 0.23-0.92). The multivariate OR for preeclampsia for women in the top quartile of potassium intake (>4.1 g/d) versus the lowest quartile (<2.4 g/d) was 0.49 (95% CI 0.24-0.99). There was some evidence of a reduced risk of preeclampsia with a high intake of magnesium and calcium, though these results were not statistically significant. Intake of fruits and vegetables, low-fat dairy products, total cereal and dark bread were each associated with a reduced risk of preeclampsia. CONCLUSION: Our results support previous reports that suggest that diets high in fiber and potassium are associated with a reduced risk of hypertension. Maternal intake of recommended amounts of foods rich in fiber, potassium and other nutrients may reduce the risk of preeclampsia.

Influence of calcium ion deposition on apatite-inducing ability of porous titanium for biomedical applications

In the present study, the influence of calcium ion deposition on the apatite-inducing ability of porous titanium(Ti) was investigated in a modified simulated body fluid (m-SBF). Calcium hydroxide (Ca(OH)₂) solutions with five degrees of saturation were used to hydrothermally deposit Ca ions on porous Ti with a porosity of 80%. Apatite-inducing ability of the Ca-ion-deposited porous Ti was evaluated by soaking them in m-SBF for up to 14 days. Scanning electron microscopy (SEM) and X-ray diffractometry (XRD) confirmed that a thin layer of calcium titanate (CaTiO₃)/calcium oxide (CaO) mixture with a nanostructured porous network was produced on porous Ti substrates after hydrothermal treatment at 200 °C for 8 h. X-ray photoelectron spectroscopy results demonstrated that the content of the Ca ions deposited on Ti and the thickness of the CaTiO₃/CaO layer increased with increasing saturation degree of the Ca(OH)₂ solution. The thickest (over 10 nm) CaTiO₃/CaO layer with the highest Ca content was achieved on the Ti treated in an oversaturated Ca(OH)₂ solution (0.2 M). SEM, XRD, transmission electron microscopy and Fourier transformed infrared spectroscopy analysis indicated that the porous Ti samples deposited with the highest content of Ca ions exhibited the best apatite-inducing ability, producing a dense and complete carbonated apatite coating after a 14 day soaking in m-SBF. The present study illustrated the validity of using Ca ion deposition as a pre-treatment to endow desirable apatite-inducing ability of porous Ti for bone tissue engineering applications.

Microstructures and bond strengths of the calcium phosphate coatings formed on titanium from different simulated body fluids

Calcium phosphate (Ca-P) coatings were deposited on Ti substrates by a biomimetic method from m-SBF and 10× SBF, respectively. Comparative study of microstructures and bond strengths of the Ca-P coatings deposited from those different SBFs was carried out. Effect of the surface roughness of the substrates on the bond strength of the Ca-P coatings was also studied. Scanning electron microscopy (SEM), X-ray diffractometry (XRD), Fourier transformed infrared spectroscopy (FTIR), inductive coupled plasma spectrometry (ICP) and thermogravimetry (TG) were used to characterize the Ca-P coatings. The bond strengths between the coatings and Ti substrates were measured using an adhesive strength test. Results indicated that the ionic concentrations of the SBFs and the surface roughness of the substrate had a significant influence on the formation, morphology and bond strength of the Ca-P precipitates. The induction period of time to deposit a complete Ca-P layer from the m-SBF is much longer, but the Ca-P coating is denser and has higher bond strength than that formed from the 10× SBF. The Ti with a surface roughness of R_a 0.64 µm and R_z 2.81 µm favoures the formation of a compact Ca-P coating from the m-SBF with the highest bond strength of approximately 15.5 MPa.

Novel organotin and organotellurium complexes : building blocks for new materials?

The research produced a series of novel oranotin and organotellurium compounds that are potential building blocks for new materials. In particular, one carbonate cluster has practical applications in the fixation and recovery of carbon dioxide gas from the atmosphere.

Interactive effects of exercise plus calcium-vitamin D3 on bone strength in older men

The findings from this 18-month, community-based study revealed that an exercise program involving strength training and jumping activities was feasible and effective for improving bone density, muscle mass and strength in older men. There were no additional skeletal benefits derived from consuming a high calcium-vitamin D milk drink.

Cracking and distortion of water jackets in engine blocks

This thesis investigated the cracking and distortion of water jackets in engine blocks. The Taguchi method was utilized to improve production process and in doing so, reducing the scrap of water jacket cores by over 60%. Further, by altering core material and pouring temperature, casting distortion was improved.

Study of calcium and silicon migration in refractory magnesia

Studied the effect calcium and silicon impurities have on magnesia refractories, a material frequently used to line high-temperature furnaces. Advanced analytical techniques identified and mapped these impurities in both raw materials and finished magnesia refractories. This research considerably enhanced understanding of factors influencing refractory properties and quality.

Studies on the properties and the thermal decomposition kinetics of natural rubber prepared with calcium chloride

To evaluate calcium chloride coagulation technology, two kinds of raw natural rubber samples were produced by calcium chloride and acetic acid respectively. Plasticity retention index (PRI), thermal degradation process, thermal degradation kinetics and differential thermal analysis of two samples studied. Furthermore, thermal degradation activation energy, pre-exponential factor and rate constant were calculated. The results show that natural rubber produced by calcium chloride possesses good mechanical property and poor thermo-stability in comparison to natural rubber produced by acetic acid.

Is excess calcium harmful to health?

Most current guidelines recommend that older adults and the elderly strive for a total calcium intake (diet and supplements) of 1,000 to 1,300 mg/day to prevent osteoporosis and fractures. Traditionally, calcium supplements have been considered safe, effective and well tolerated, but their safety has recently been questioned due to potential adverse effects on vascular disease which may increase mortality. For example, the findings from a meta-analysis of randomized controlled trials (currently published in abstract form only) revealed that the use of calcium supplements was associated with an ~30% increased risk of myocardial infarction. If high levels of calcium are harmful to health, this may alter current public health recommendations with regard to the use of calcium supplements for preventing osteoporosis. In this review, we provide an overview of the latest information from human observational and prospective studies, randomized controlled trials and meta-analyses related to the effects of calcium supplementation on vascular disease and related risk factors, including blood pressure, lipid and lipoprotein levels and vascular calcification.